diff --git a/.gitignore b/.gitignore index 126d912..08b4e09 100644 --- a/.gitignore +++ b/.gitignore @@ -11,4 +11,6 @@ Makefile .deps/ src/ocelot CMakeLists.txt -/ocelot.conf \ No newline at end of file +/ocelot.conf +build/ +/ocelot diff --git a/CMake/FINDLibEv.cmake b/CMake/FINDLibEv.cmake new file mode 100644 index 0000000..71e4508 --- /dev/null +++ b/CMake/FINDLibEv.cmake @@ -0,0 +1,38 @@ +# - Try to find libev +# Once done this will define +# LIBEV_FOUND - System has libev +# LIBEV_INCLUDE_DIRS - The libev include directories +# LIBEV_LIBRARIES - The libraries needed to use libev + +find_path(LIBEV_INCLUDE_DIR + NAMES ev.h +) +find_library(LIBEV_LIBRARY + NAMES ev +) + +if(LIBEV_INCLUDE_DIR) + file(STRINGS "${LIBEV_INCLUDE_DIR}/ev.h" + LIBEV_VERSION_MAJOR REGEX "^#define[ \t]+EV_VERSION_MAJOR[ \t]+[0-9]+") + file(STRINGS "${LIBEV_INCLUDE_DIR}/ev.h" + LIBEV_VERSION_MINOR REGEX "^#define[ \t]+EV_VERSION_MINOR[ \t]+[0-9]+") + string(REGEX REPLACE "[^0-9]+" "" LIBEV_VERSION_MAJOR "${LIBEV_VERSION_MAJOR}") + string(REGEX REPLACE "[^0-9]+" "" LIBEV_VERSION_MINOR "${LIBEV_VERSION_MINOR}") + set(LIBEV_VERSION "${LIBEV_VERSION_MAJOR}.${LIBEV_VERSION_MINOR}") + unset(LIBEV_VERSION_MINOR) + unset(LIBEV_VERSION_MAJOR) +endif() + +include(FindPackageHandleStandardArgs) +# handle the QUIETLY and REQUIRED arguments and set LIBEV_FOUND to TRUE +# if all listed variables are TRUE and the requested version matches. +find_package_handle_standard_args(Libev REQUIRED_VARS + LIBEV_LIBRARY LIBEV_INCLUDE_DIR + VERSION_VAR LIBEV_VERSION) + +if(LIBEV_FOUND) + set(LIBEV_LIBRARIES ${LIBEV_LIBRARY}) + set(LIBEV_INCLUDE_DIRS ${LIBEV_INCLUDE_DIR}) +endif() + +mark_as_advanced(LIBEV_INCLUDE_DIR LIBEV_LIBRARY) diff --git a/CMake/FindJemalloc.cmake b/CMake/FindJemalloc.cmake new file mode 100644 index 0000000..1f1160a --- /dev/null +++ b/CMake/FindJemalloc.cmake @@ -0,0 +1,48 @@ +# From: https://raw.githubusercontent.com/STEllAR-GROUP/hpx/master/cmake/FindJemalloc.cmake +# Copyright (c) 2014 Thomas Heller +# Copyright (c) 2007-2012 Hartmut Kaiser +# Copyright (c) 2010-2011 Matt Anderson +# Copyright (c) 2011 Bryce Lelbach +# +# Distributed under the Boost Software License, Version 1.0. (See accompanying +# file LICENSE_1_0.txt or copy at http://www.boost.org/LICENSE_1_0.txt) + +find_package(PkgConfig) +pkg_check_modules(PC_JEMALLOC QUIET libjemalloc) + +find_path(JEMALLOC_INCLUDE_DIR jemalloc/jemalloc.h + HINTS + ${JEMALLOC_ROOT} ENV JEMALLOC_ROOT + ${PC_JEMALLOC_MINIMAL_INCLUDEDIR} + ${PC_JEMALLOC_MINIMAL_INCLUDE_DIRS} + ${PC_JEMALLOC_INCLUDEDIR} + ${PC_JEMALLOC_INCLUDE_DIRS} + PATH_SUFFIXES include) + +find_library(JEMALLOC_LIBRARY NAMES jemalloc libjemalloc + HINTS + ${JEMALLOC_ROOT} ENV JEMALLOC_ROOT + ${PC_JEMALLOC_MINIMAL_LIBDIR} + ${PC_JEMALLOC_MINIMAL_LIBRARY_DIRS} + ${PC_JEMALLOC_LIBDIR} + ${PC_JEMALLOC_LIBRARY_DIRS} + PATH_SUFFIXES lib lib64) + +if(JEMALLOC_LIBRARY AND JEMALLOC_INCLUDE_DIR) + set(JEMALLOC_FOUND TRUE) + message(STATUS "Found jemalloc: ${JEMALLOC_LIBRARY}") + find_package_handle_standard_args(Jemalloc DEFAULT_MSG + JEMALLOC_LIBRARY JEMALLOC_INCLUDE_DIR) + + get_property(_type CACHE JEMALLOC_ROOT PROPERTY TYPE) + if(_type) + set_property(CACHE JEMALLOC_ROOT PROPERTY ADVANCED 1) + if("x${_type}" STREQUAL "xUNINITIALIZED") + set_property(CACHE JEMALLOC_ROOT PROPERTY TYPE PATH) + endif() + endif() +else() + set(JEMALLOC_FOUND FALSE) +endif() + +mark_as_advanced(JEMALLOC_ROOT JEMALLOC_LIBRARY JEMALLOC_INCLUDE_DIR) \ No newline at end of file diff --git a/CMake/FindMYSQLPP.cmake b/CMake/FindMYSQLPP.cmake new file mode 100644 index 0000000..64dde37 --- /dev/null +++ b/CMake/FindMYSQLPP.cmake @@ -0,0 +1,33 @@ +# - Find MySQL++ +# Find the MySQL++ includes and client library +# This module defines +# MYSQLPP_INCLUDE_DIR, where to find mysql.h +# MYSQLPP_LIBRARY, the libraries needed to use MySQL. +# MYSQLPP_FOUND, If false, do not try to use MySQL. + +FIND_PATH(MYSQLPP_INCLUDE_DIR mysql++.h + /usr/include/mysql++ + /usr/local/include/mysql++ + /opt/mysql++/include/mysql++ + /opt/mysqlpp/include/mysql++ + /opt/mysqlpp/include/ +) + +FIND_LIBRARY(MYSQLPP_LIBRARY mysqlpp + PATHS + /usr/lib + /usr/local/lib + /opt/mysql++ + /opt/mysqlpp + /opt/mysqlpp/lib +) + +if(MYSQLPP_INCLUDE_DIR AND MYSQLPP_LIBRARY) + set(MYSQLPP_FOUND TRUE) + message(STATUS "Found MySQL++: ${MYSQLPP_INCLUDE_DIR}, ${MYSQLPP_LIBRARY}") +else() + set(MYSQLPP_FOUND FALSE) + message(STATUS "MySQL++ was not found.") +endif() + +mark_as_advanced(MYSQLPP_INCLUDE_DIR MYSQLPP_LIBRARY) diff --git a/CMake/FindMySQL.cmake b/CMake/FindMySQL.cmake new file mode 100644 index 0000000..6d85728 --- /dev/null +++ b/CMake/FindMySQL.cmake @@ -0,0 +1,113 @@ +#-------------------------------------------------------- +# Copyright (C) 1995-2007 MySQL AB +# +# This program is free software; you can redistribute it and/or modify +# it under the terms of version 2 of the GNU General Public License as +# published by the Free Software Foundation. +# +# There are special exceptions to the terms and conditions of the GPL +# as it is applied to this software. View the full text of the exception +# in file LICENSE.exceptions in the top-level directory of this software +# distribution. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., +# 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA +# +# The MySQL Connector/ODBC is licensed under the terms of the +# GPL, like most MySQL Connectors. There are special exceptions +# to the terms and conditions of the GPL as it is applied to +# this software, see the FLOSS License Exception available on +# mysql.com. + +########################################################################## + + +#-------------- FIND MYSQL_INCLUDE_DIR ------------------ +FIND_PATH(MYSQL_INCLUDE_DIR mysql.h + /usr/include/mysql + /usr/local/include/mysql + /opt/mysql/mysql/include + /opt/mysql/mysql/include/mysql + /opt/mysql/include + /opt/local/include/mysql5 + /usr/local/mysql/include + /usr/local/mysql/include/mysql + $ENV{ProgramFiles}/MySQL/*/include + $ENV{SystemDrive}/MySQL/*/include) + +#----------------- FIND MYSQL_LIB_DIR ------------------- +IF (WIN32) + # Set lib path suffixes + # dist = for mysql binary distributions + # build = for custom built tree + IF (CMAKE_BUILD_TYPE STREQUAL Debug) + SET(libsuffixDist debug) + SET(libsuffixBuild Debug) + ELSE (CMAKE_BUILD_TYPE STREQUAL Debug) + SET(libsuffixDist opt) + SET(libsuffixBuild Release) + ADD_DEFINITIONS(-DDBUG_OFF) + ENDIF (CMAKE_BUILD_TYPE STREQUAL Debug) + + FIND_LIBRARY(MYSQL_LIB NAMES mysqlclient + PATHS + $ENV{MYSQL_DIR}/lib/${libsuffixDist} + $ENV{MYSQL_DIR}/libmysql + $ENV{MYSQL_DIR}/libmysql/${libsuffixBuild} + $ENV{MYSQL_DIR}/client/${libsuffixBuild} + $ENV{MYSQL_DIR}/libmysql/${libsuffixBuild} + $ENV{ProgramFiles}/MySQL/*/lib/${libsuffixDist} + $ENV{SystemDrive}/MySQL/*/lib/${libsuffixDist}) +ELSE (WIN32) + FIND_LIBRARY(MYSQL_LIB NAMES mysqlclient_r mysqlclient + PATHS + /usr/lib/mysql + /usr/local/lib/mysql + /usr/local/mysql/lib + /usr/local/mysql/lib/mysql + /opt/local/mysql5/lib + /opt/local/lib/mysql5/mysql + /opt/mysql/mysql/lib/mysql + /opt/mysql/lib/mysql) +ENDIF (WIN32) + +IF(MYSQL_LIB) + GET_FILENAME_COMPONENT(MYSQL_LIB_DIR ${MYSQL_LIB} PATH) +ENDIF(MYSQL_LIB) + +IF (MYSQL_INCLUDE_DIR AND MYSQL_LIB_DIR) + SET(MYSQL_FOUND TRUE) + + INCLUDE_DIRECTORIES(${MYSQL_INCLUDE_DIR}) + LINK_DIRECTORIES(${MYSQL_LIB_DIR}) + + FIND_LIBRARY(MYSQL_ZLIB zlib PATHS ${MYSQL_LIB_DIR}) + FIND_LIBRARY(MYSQL_TAOCRYPT taocrypt PATHS ${MYSQL_LIB_DIR}) + IF (MYSQL_LIB) + SET(MYSQL_CLIENT_LIBS ${MYSQL_LIB}) + ELSE() + SET(MYSQL_CLIENT_LIBS mysqlclient_r) + ENDIF() + IF (MYSQL_ZLIB) + SET(MYSQL_CLIENT_LIBS ${MYSQL_CLIENT_LIBS} zlib) + ENDIF (MYSQL_ZLIB) + IF (MYSQL_TAOCRYPT) + SET(MYSQL_CLIENT_LIBS ${MYSQL_CLIENT_LIBS} taocrypt) + ENDIF (MYSQL_TAOCRYPT) + # Added needed mysqlclient dependencies on Windows + IF (WIN32) + SET(MYSQL_CLIENT_LIBS ${MYSQL_CLIENT_LIBS} ws2_32) + ENDIF (WIN32) + + MESSAGE(STATUS "MySQL Include dir: ${MYSQL_INCLUDE_DIR} library dir: ${MYSQL_LIB_DIR}") + MESSAGE(STATUS "MySQL client libraries: ${MYSQL_CLIENT_LIBS}") +ELSEIF (MySQL_FIND_REQUIRED) + MESSAGE(FATAL_ERROR "Cannot find MySQL. Include dir: ${MYSQL_INCLUDE_DIR} library dir: ${MYSQL_LIB_DIR}") +ENDIF (MYSQL_INCLUDE_DIR AND MYSQL_LIB_DIR) \ No newline at end of file diff --git a/CMake/FindTcmalloc.cmake b/CMake/FindTcmalloc.cmake new file mode 100644 index 0000000..4d9d6dc --- /dev/null +++ b/CMake/FindTcmalloc.cmake @@ -0,0 +1,42 @@ +# - Find Tcmalloc +# Find the native Tcmalloc includes and library +# +# TCMALLOC_INCLUDE_DIR - where to find Tcmalloc.h, etc. +# TCMALLOC_LIBRARIES - List of libraries when using Tcmalloc. +# TCMALLOC_FOUND - True if Tcmalloc found. + +find_path(TCMALLOC_INCLUDE_DIR google/tcmalloc.h + NO_DEFAULT_PATH + PATHS + /usr/include + /usr/local/include + /opt/local/include +) + +set(TCMALLOC_NAMES tcmalloc_minimal tcmalloc) + +find_library(TCMALLOC_LIBRARY NO_DEFAULT_PATH + NAMES ${TCMALLOC_NAMES} + PATHS + /lib + /usr/lib + /usr/local/lib + /opt/local/lib +) + +if(TCMALLOC_INCLUDE_DIR AND TCMALLOC_LIBRARY) + set(TCMALLOC_FOUND TRUE) +else() + set(TCMALLOC_FOUND FALSE) +endif() + +if(TCMALLOC_FOUND) + message(STATUS "Found Tcmalloc: ${TCMALLOC_LIBRARY}") +else() + message(STATUS "Could not find tcmalloc") +endif() + +mark_as_advanced( + TCMALLOC_LIBRARY + TCMALLOC_INCLUDE_DIR +) diff --git a/Dockerfile b/Dockerfile new file mode 100644 index 0000000..2b32d08 --- /dev/null +++ b/Dockerfile @@ -0,0 +1,31 @@ +FROM debian:stretch-slim + +COPY . /srv +WORKDIR /srv + +RUN apt-get update \ + && apt-get install --no-install-recommends -y \ + build-essential \ + cmake \ + default-libmysqlclient-dev \ + libboost-iostreams-dev \ + libboost-system-dev \ + libev-dev \ + libjemalloc-dev \ + libmysql++-dev \ + pkg-config \ + && mkdir build \ + && cd build \ + && cmake .. \ + && make \ + && apt-get purge -y \ + build-essential \ + cmake \ + pkg-config \ + && apt-get autoremove -y \ + && apt-get clean -y \ + && rm -rf /var/lib/apt/lists/* \ + && mv /srv/build/ocelot /srv/ocelot \ + && mv /srv/ocelot.conf.dist /srv/ocelot.conf + +CMD ["/srv/ocelot"] \ No newline at end of file diff --git a/Makefile.am b/Makefile.am deleted file mode 100644 index 5fdc7eb..0000000 --- a/Makefile.am +++ /dev/null @@ -1,7 +0,0 @@ -ACLOCAL_AMFLAGS = -I m4 - -EXTRA_DIST = CHANGES LICENSE README.md ocelot.conf.dist -SUBDIRS = src -dist-hook: - touch ${distdir}/configure - patch -p2 -d ${distdir} --no-backup-if-mismatch < ../dist.patch \ No newline at end of file diff --git a/aclocal.m4 b/aclocal.m4 deleted file mode 100644 index 7e007b3..0000000 --- a/aclocal.m4 +++ /dev/null @@ -1,1158 +0,0 @@ -# generated automatically by aclocal 1.14.1 -*- Autoconf -*- - -# Copyright (C) 1996-2013 Free Software Foundation, Inc. - -# This file is free software; the Free Software Foundation -# gives unlimited permission to copy and/or distribute it, -# with or without modifications, as long as this notice is preserved. - -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY, to the extent permitted by law; without -# even the implied warranty of MERCHANTABILITY or FITNESS FOR A -# PARTICULAR PURPOSE. - -m4_ifndef([AC_CONFIG_MACRO_DIRS], [m4_defun([_AM_CONFIG_MACRO_DIRS], [])m4_defun([AC_CONFIG_MACRO_DIRS], [_AM_CONFIG_MACRO_DIRS($@)])]) -m4_ifndef([AC_AUTOCONF_VERSION], - [m4_copy([m4_PACKAGE_VERSION], [AC_AUTOCONF_VERSION])])dnl -m4_if(m4_defn([AC_AUTOCONF_VERSION]), [2.69],, -[m4_warning([this file was generated for autoconf 2.69. -You have another version of autoconf. It may work, but is not guaranteed to. -If you have problems, you may need to regenerate the build system entirely. -To do so, use the procedure documented by the package, typically 'autoreconf'.])]) - -# Copyright (C) 2002-2013 Free Software Foundation, Inc. -# -# This file is free software; the Free Software Foundation -# gives unlimited permission to copy and/or distribute it, -# with or without modifications, as long as this notice is preserved. - -# AM_AUTOMAKE_VERSION(VERSION) -# ---------------------------- -# Automake X.Y traces this macro to ensure aclocal.m4 has been -# generated from the m4 files accompanying Automake X.Y. -# (This private macro should not be called outside this file.) -AC_DEFUN([AM_AUTOMAKE_VERSION], -[am__api_version='1.14' -dnl Some users find AM_AUTOMAKE_VERSION and mistake it for a way to -dnl require some minimum version. Point them to the right macro. -m4_if([$1], [1.14.1], [], - [AC_FATAL([Do not call $0, use AM_INIT_AUTOMAKE([$1]).])])dnl -]) - -# _AM_AUTOCONF_VERSION(VERSION) -# ----------------------------- -# aclocal traces this macro to find the Autoconf version. -# This is a private macro too. Using m4_define simplifies -# the logic in aclocal, which can simply ignore this definition. -m4_define([_AM_AUTOCONF_VERSION], []) - -# AM_SET_CURRENT_AUTOMAKE_VERSION -# ------------------------------- -# Call AM_AUTOMAKE_VERSION and AM_AUTOMAKE_VERSION so they can be traced. -# This function is AC_REQUIREd by AM_INIT_AUTOMAKE. -AC_DEFUN([AM_SET_CURRENT_AUTOMAKE_VERSION], -[AM_AUTOMAKE_VERSION([1.14.1])dnl -m4_ifndef([AC_AUTOCONF_VERSION], - [m4_copy([m4_PACKAGE_VERSION], [AC_AUTOCONF_VERSION])])dnl -_AM_AUTOCONF_VERSION(m4_defn([AC_AUTOCONF_VERSION]))]) - -# AM_AUX_DIR_EXPAND -*- Autoconf -*- - -# Copyright (C) 2001-2013 Free Software Foundation, Inc. -# -# This file is free software; the Free Software Foundation -# gives unlimited permission to copy and/or distribute it, -# with or without modifications, as long as this notice is preserved. - -# For projects using AC_CONFIG_AUX_DIR([foo]), Autoconf sets -# $ac_aux_dir to '$srcdir/foo'. In other projects, it is set to -# '$srcdir', '$srcdir/..', or '$srcdir/../..'. -# -# Of course, Automake must honor this variable whenever it calls a -# tool from the auxiliary directory. The problem is that $srcdir (and -# therefore $ac_aux_dir as well) can be either absolute or relative, -# depending on how configure is run. This is pretty annoying, since -# it makes $ac_aux_dir quite unusable in subdirectories: in the top -# source directory, any form will work fine, but in subdirectories a -# relative path needs to be adjusted first. -# -# $ac_aux_dir/missing -# fails when called from a subdirectory if $ac_aux_dir is relative -# $top_srcdir/$ac_aux_dir/missing -# fails if $ac_aux_dir is absolute, -# fails when called from a subdirectory in a VPATH build with -# a relative $ac_aux_dir -# -# The reason of the latter failure is that $top_srcdir and $ac_aux_dir -# are both prefixed by $srcdir. In an in-source build this is usually -# harmless because $srcdir is '.', but things will broke when you -# start a VPATH build or use an absolute $srcdir. -# -# So we could use something similar to $top_srcdir/$ac_aux_dir/missing, -# iff we strip the leading $srcdir from $ac_aux_dir. That would be: -# am_aux_dir='\$(top_srcdir)/'`expr "$ac_aux_dir" : "$srcdir//*\(.*\)"` -# and then we would define $MISSING as -# MISSING="\${SHELL} $am_aux_dir/missing" -# This will work as long as MISSING is not called from configure, because -# unfortunately $(top_srcdir) has no meaning in configure. -# However there are other variables, like CC, which are often used in -# configure, and could therefore not use this "fixed" $ac_aux_dir. -# -# Another solution, used here, is to always expand $ac_aux_dir to an -# absolute PATH. The drawback is that using absolute paths prevent a -# configured tree to be moved without reconfiguration. - -AC_DEFUN([AM_AUX_DIR_EXPAND], -[AC_REQUIRE([AC_CONFIG_AUX_DIR_DEFAULT])dnl -# Expand $ac_aux_dir to an absolute path. -am_aux_dir=`cd "$ac_aux_dir" && pwd` -]) - -# AM_CONDITIONAL -*- Autoconf -*- - -# Copyright (C) 1997-2013 Free Software Foundation, Inc. -# -# This file is free software; the Free Software Foundation -# gives unlimited permission to copy and/or distribute it, -# with or without modifications, as long as this notice is preserved. - -# AM_CONDITIONAL(NAME, SHELL-CONDITION) -# ------------------------------------- -# Define a conditional. -AC_DEFUN([AM_CONDITIONAL], -[AC_PREREQ([2.52])dnl - m4_if([$1], [TRUE], [AC_FATAL([$0: invalid condition: $1])], - [$1], [FALSE], [AC_FATAL([$0: invalid condition: $1])])dnl -AC_SUBST([$1_TRUE])dnl -AC_SUBST([$1_FALSE])dnl -_AM_SUBST_NOTMAKE([$1_TRUE])dnl -_AM_SUBST_NOTMAKE([$1_FALSE])dnl -m4_define([_AM_COND_VALUE_$1], [$2])dnl -if $2; then - $1_TRUE= - $1_FALSE='#' -else - $1_TRUE='#' - $1_FALSE= -fi -AC_CONFIG_COMMANDS_PRE( -[if test -z "${$1_TRUE}" && test -z "${$1_FALSE}"; then - AC_MSG_ERROR([[conditional "$1" was never defined. -Usually this means the macro was only invoked conditionally.]]) -fi])]) - -# Copyright (C) 1999-2013 Free Software Foundation, Inc. -# -# This file is free software; the Free Software Foundation -# gives unlimited permission to copy and/or distribute it, -# with or without modifications, as long as this notice is preserved. - - -# There are a few dirty hacks below to avoid letting 'AC_PROG_CC' be -# written in clear, in which case automake, when reading aclocal.m4, -# will think it sees a *use*, and therefore will trigger all it's -# C support machinery. Also note that it means that autoscan, seeing -# CC etc. in the Makefile, will ask for an AC_PROG_CC use... - - -# _AM_DEPENDENCIES(NAME) -# ---------------------- -# See how the compiler implements dependency checking. -# NAME is "CC", "CXX", "OBJC", "OBJCXX", "UPC", or "GJC". -# We try a few techniques and use that to set a single cache variable. -# -# We don't AC_REQUIRE the corresponding AC_PROG_CC since the latter was -# modified to invoke _AM_DEPENDENCIES(CC); we would have a circular -# dependency, and given that the user is not expected to run this macro, -# just rely on AC_PROG_CC. -AC_DEFUN([_AM_DEPENDENCIES], -[AC_REQUIRE([AM_SET_DEPDIR])dnl -AC_REQUIRE([AM_OUTPUT_DEPENDENCY_COMMANDS])dnl -AC_REQUIRE([AM_MAKE_INCLUDE])dnl -AC_REQUIRE([AM_DEP_TRACK])dnl - -m4_if([$1], [CC], [depcc="$CC" am_compiler_list=], - [$1], [CXX], [depcc="$CXX" am_compiler_list=], - [$1], [OBJC], [depcc="$OBJC" am_compiler_list='gcc3 gcc'], - [$1], [OBJCXX], [depcc="$OBJCXX" am_compiler_list='gcc3 gcc'], - [$1], [UPC], [depcc="$UPC" am_compiler_list=], - [$1], [GCJ], [depcc="$GCJ" am_compiler_list='gcc3 gcc'], - [depcc="$$1" am_compiler_list=]) - -AC_CACHE_CHECK([dependency style of $depcc], - [am_cv_$1_dependencies_compiler_type], -[if test -z "$AMDEP_TRUE" && test -f "$am_depcomp"; then - # We make a subdir and do the tests there. Otherwise we can end up - # making bogus files that we don't know about and never remove. For - # instance it was reported that on HP-UX the gcc test will end up - # making a dummy file named 'D' -- because '-MD' means "put the output - # in D". - rm -rf conftest.dir - mkdir conftest.dir - # Copy depcomp to subdir because otherwise we won't find it if we're - # using a relative directory. - cp "$am_depcomp" conftest.dir - cd conftest.dir - # We will build objects and dependencies in a subdirectory because - # it helps to detect inapplicable dependency modes. For instance - # both Tru64's cc and ICC support -MD to output dependencies as a - # side effect of compilation, but ICC will put the dependencies in - # the current directory while Tru64 will put them in the object - # directory. - mkdir sub - - am_cv_$1_dependencies_compiler_type=none - if test "$am_compiler_list" = ""; then - am_compiler_list=`sed -n ['s/^#*\([a-zA-Z0-9]*\))$/\1/p'] < ./depcomp` - fi - am__universal=false - m4_case([$1], [CC], - [case " $depcc " in #( - *\ -arch\ *\ -arch\ *) am__universal=true ;; - esac], - [CXX], - [case " $depcc " in #( - *\ -arch\ *\ -arch\ *) am__universal=true ;; - esac]) - - for depmode in $am_compiler_list; do - # Setup a source with many dependencies, because some compilers - # like to wrap large dependency lists on column 80 (with \), and - # we should not choose a depcomp mode which is confused by this. - # - # We need to recreate these files for each test, as the compiler may - # overwrite some of them when testing with obscure command lines. - # This happens at least with the AIX C compiler. - : > sub/conftest.c - for i in 1 2 3 4 5 6; do - echo '#include "conftst'$i'.h"' >> sub/conftest.c - # Using ": > sub/conftst$i.h" creates only sub/conftst1.h with - # Solaris 10 /bin/sh. - echo '/* dummy */' > sub/conftst$i.h - done - echo "${am__include} ${am__quote}sub/conftest.Po${am__quote}" > confmf - - # We check with '-c' and '-o' for the sake of the "dashmstdout" - # mode. It turns out that the SunPro C++ compiler does not properly - # handle '-M -o', and we need to detect this. Also, some Intel - # versions had trouble with output in subdirs. - am__obj=sub/conftest.${OBJEXT-o} - am__minus_obj="-o $am__obj" - case $depmode in - gcc) - # This depmode causes a compiler race in universal mode. - test "$am__universal" = false || continue - ;; - nosideeffect) - # After this tag, mechanisms are not by side-effect, so they'll - # only be used when explicitly requested. - if test "x$enable_dependency_tracking" = xyes; then - continue - else - break - fi - ;; - msvc7 | msvc7msys | msvisualcpp | msvcmsys) - # This compiler won't grok '-c -o', but also, the minuso test has - # not run yet. These depmodes are late enough in the game, and - # so weak that their functioning should not be impacted. - am__obj=conftest.${OBJEXT-o} - am__minus_obj= - ;; - none) break ;; - esac - if depmode=$depmode \ - source=sub/conftest.c object=$am__obj \ - depfile=sub/conftest.Po tmpdepfile=sub/conftest.TPo \ - $SHELL ./depcomp $depcc -c $am__minus_obj sub/conftest.c \ - >/dev/null 2>conftest.err && - grep sub/conftst1.h sub/conftest.Po > /dev/null 2>&1 && - grep sub/conftst6.h sub/conftest.Po > /dev/null 2>&1 && - grep $am__obj sub/conftest.Po > /dev/null 2>&1 && - ${MAKE-make} -s -f confmf > /dev/null 2>&1; then - # icc doesn't choke on unknown options, it will just issue warnings - # or remarks (even with -Werror). So we grep stderr for any message - # that says an option was ignored or not supported. - # When given -MP, icc 7.0 and 7.1 complain thusly: - # icc: Command line warning: ignoring option '-M'; no argument required - # The diagnosis changed in icc 8.0: - # icc: Command line remark: option '-MP' not supported - if (grep 'ignoring option' conftest.err || - grep 'not supported' conftest.err) >/dev/null 2>&1; then :; else - am_cv_$1_dependencies_compiler_type=$depmode - break - fi - fi - done - - cd .. - rm -rf conftest.dir -else - am_cv_$1_dependencies_compiler_type=none -fi -]) -AC_SUBST([$1DEPMODE], [depmode=$am_cv_$1_dependencies_compiler_type]) -AM_CONDITIONAL([am__fastdep$1], [ - test "x$enable_dependency_tracking" != xno \ - && test "$am_cv_$1_dependencies_compiler_type" = gcc3]) -]) - - -# AM_SET_DEPDIR -# ------------- -# Choose a directory name for dependency files. -# This macro is AC_REQUIREd in _AM_DEPENDENCIES. -AC_DEFUN([AM_SET_DEPDIR], -[AC_REQUIRE([AM_SET_LEADING_DOT])dnl -AC_SUBST([DEPDIR], ["${am__leading_dot}deps"])dnl -]) - - -# AM_DEP_TRACK -# ------------ -AC_DEFUN([AM_DEP_TRACK], -[AC_ARG_ENABLE([dependency-tracking], [dnl -AS_HELP_STRING( - [--enable-dependency-tracking], - [do not reject slow dependency extractors]) -AS_HELP_STRING( - [--disable-dependency-tracking], - [speeds up one-time build])]) -if test "x$enable_dependency_tracking" != xno; then - am_depcomp="$ac_aux_dir/depcomp" - AMDEPBACKSLASH='\' - am__nodep='_no' -fi -AM_CONDITIONAL([AMDEP], [test "x$enable_dependency_tracking" != xno]) -AC_SUBST([AMDEPBACKSLASH])dnl -_AM_SUBST_NOTMAKE([AMDEPBACKSLASH])dnl -AC_SUBST([am__nodep])dnl -_AM_SUBST_NOTMAKE([am__nodep])dnl -]) - -# Generate code to set up dependency tracking. -*- Autoconf -*- - -# Copyright (C) 1999-2013 Free Software Foundation, Inc. -# -# This file is free software; the Free Software Foundation -# gives unlimited permission to copy and/or distribute it, -# with or without modifications, as long as this notice is preserved. - - -# _AM_OUTPUT_DEPENDENCY_COMMANDS -# ------------------------------ -AC_DEFUN([_AM_OUTPUT_DEPENDENCY_COMMANDS], -[{ - # Older Autoconf quotes --file arguments for eval, but not when files - # are listed without --file. Let's play safe and only enable the eval - # if we detect the quoting. - case $CONFIG_FILES in - *\'*) eval set x "$CONFIG_FILES" ;; - *) set x $CONFIG_FILES ;; - esac - shift - for mf - do - # Strip MF so we end up with the name of the file. - mf=`echo "$mf" | sed -e 's/:.*$//'` - # Check whether this is an Automake generated Makefile or not. - # We used to match only the files named 'Makefile.in', but - # some people rename them; so instead we look at the file content. - # Grep'ing the first line is not enough: some people post-process - # each Makefile.in and add a new line on top of each file to say so. - # Grep'ing the whole file is not good either: AIX grep has a line - # limit of 2048, but all sed's we know have understand at least 4000. - if sed -n 's,^#.*generated by automake.*,X,p' "$mf" | grep X >/dev/null 2>&1; then - dirpart=`AS_DIRNAME("$mf")` - else - continue - fi - # Extract the definition of DEPDIR, am__include, and am__quote - # from the Makefile without running 'make'. - DEPDIR=`sed -n 's/^DEPDIR = //p' < "$mf"` - test -z "$DEPDIR" && continue - am__include=`sed -n 's/^am__include = //p' < "$mf"` - test -z "$am__include" && continue - am__quote=`sed -n 's/^am__quote = //p' < "$mf"` - # Find all dependency output files, they are included files with - # $(DEPDIR) in their names. We invoke sed twice because it is the - # simplest approach to changing $(DEPDIR) to its actual value in the - # expansion. - for file in `sed -n " - s/^$am__include $am__quote\(.*(DEPDIR).*\)$am__quote"'$/\1/p' <"$mf" | \ - sed -e 's/\$(DEPDIR)/'"$DEPDIR"'/g'`; do - # Make sure the directory exists. - test -f "$dirpart/$file" && continue - fdir=`AS_DIRNAME(["$file"])` - AS_MKDIR_P([$dirpart/$fdir]) - # echo "creating $dirpart/$file" - echo '# dummy' > "$dirpart/$file" - done - done -} -])# _AM_OUTPUT_DEPENDENCY_COMMANDS - - -# AM_OUTPUT_DEPENDENCY_COMMANDS -# ----------------------------- -# This macro should only be invoked once -- use via AC_REQUIRE. -# -# This code is only required when automatic dependency tracking -# is enabled. FIXME. This creates each '.P' file that we will -# need in order to bootstrap the dependency handling code. -AC_DEFUN([AM_OUTPUT_DEPENDENCY_COMMANDS], -[AC_CONFIG_COMMANDS([depfiles], - [test x"$AMDEP_TRUE" != x"" || _AM_OUTPUT_DEPENDENCY_COMMANDS], - [AMDEP_TRUE="$AMDEP_TRUE" ac_aux_dir="$ac_aux_dir"]) -]) - -# Do all the work for Automake. -*- Autoconf -*- - -# Copyright (C) 1996-2013 Free Software Foundation, Inc. -# -# This file is free software; the Free Software Foundation -# gives unlimited permission to copy and/or distribute it, -# with or without modifications, as long as this notice is preserved. - -# This macro actually does too much. Some checks are only needed if -# your package does certain things. But this isn't really a big deal. - -dnl Redefine AC_PROG_CC to automatically invoke _AM_PROG_CC_C_O. -m4_define([AC_PROG_CC], -m4_defn([AC_PROG_CC]) -[_AM_PROG_CC_C_O -]) - -# AM_INIT_AUTOMAKE(PACKAGE, VERSION, [NO-DEFINE]) -# AM_INIT_AUTOMAKE([OPTIONS]) -# ----------------------------------------------- -# The call with PACKAGE and VERSION arguments is the old style -# call (pre autoconf-2.50), which is being phased out. PACKAGE -# and VERSION should now be passed to AC_INIT and removed from -# the call to AM_INIT_AUTOMAKE. -# We support both call styles for the transition. After -# the next Automake release, Autoconf can make the AC_INIT -# arguments mandatory, and then we can depend on a new Autoconf -# release and drop the old call support. -AC_DEFUN([AM_INIT_AUTOMAKE], -[AC_PREREQ([2.65])dnl -dnl Autoconf wants to disallow AM_ names. We explicitly allow -dnl the ones we care about. -m4_pattern_allow([^AM_[A-Z]+FLAGS$])dnl -AC_REQUIRE([AM_SET_CURRENT_AUTOMAKE_VERSION])dnl -AC_REQUIRE([AC_PROG_INSTALL])dnl -if test "`cd $srcdir && pwd`" != "`pwd`"; then - # Use -I$(srcdir) only when $(srcdir) != ., so that make's output - # is not polluted with repeated "-I." - AC_SUBST([am__isrc], [' -I$(srcdir)'])_AM_SUBST_NOTMAKE([am__isrc])dnl - # test to see if srcdir already configured - if test -f $srcdir/config.status; then - AC_MSG_ERROR([source directory already configured; run "make distclean" there first]) - fi -fi - -# test whether we have cygpath -if test -z "$CYGPATH_W"; then - if (cygpath --version) >/dev/null 2>/dev/null; then - CYGPATH_W='cygpath -w' - else - CYGPATH_W=echo - fi -fi -AC_SUBST([CYGPATH_W]) - -# Define the identity of the package. -dnl Distinguish between old-style and new-style calls. -m4_ifval([$2], -[AC_DIAGNOSE([obsolete], - [$0: two- and three-arguments forms are deprecated.]) -m4_ifval([$3], [_AM_SET_OPTION([no-define])])dnl - AC_SUBST([PACKAGE], [$1])dnl - AC_SUBST([VERSION], [$2])], -[_AM_SET_OPTIONS([$1])dnl -dnl Diagnose old-style AC_INIT with new-style AM_AUTOMAKE_INIT. -m4_if( - m4_ifdef([AC_PACKAGE_NAME], [ok]):m4_ifdef([AC_PACKAGE_VERSION], [ok]), - [ok:ok],, - [m4_fatal([AC_INIT should be called with package and version arguments])])dnl - AC_SUBST([PACKAGE], ['AC_PACKAGE_TARNAME'])dnl - AC_SUBST([VERSION], ['AC_PACKAGE_VERSION'])])dnl - -_AM_IF_OPTION([no-define],, -[AC_DEFINE_UNQUOTED([PACKAGE], ["$PACKAGE"], [Name of package]) - AC_DEFINE_UNQUOTED([VERSION], ["$VERSION"], [Version number of package])])dnl - -# Some tools Automake needs. -AC_REQUIRE([AM_SANITY_CHECK])dnl -AC_REQUIRE([AC_ARG_PROGRAM])dnl -AM_MISSING_PROG([ACLOCAL], [aclocal-${am__api_version}]) -AM_MISSING_PROG([AUTOCONF], [autoconf]) -AM_MISSING_PROG([AUTOMAKE], [automake-${am__api_version}]) -AM_MISSING_PROG([AUTOHEADER], [autoheader]) -AM_MISSING_PROG([MAKEINFO], [makeinfo]) -AC_REQUIRE([AM_PROG_INSTALL_SH])dnl -AC_REQUIRE([AM_PROG_INSTALL_STRIP])dnl -AC_REQUIRE([AC_PROG_MKDIR_P])dnl -# For better backward compatibility. To be removed once Automake 1.9.x -# dies out for good. For more background, see: -# -# -AC_SUBST([mkdir_p], ['$(MKDIR_P)']) -# We need awk for the "check" target. The system "awk" is bad on -# some platforms. -AC_REQUIRE([AC_PROG_AWK])dnl -AC_REQUIRE([AC_PROG_MAKE_SET])dnl -AC_REQUIRE([AM_SET_LEADING_DOT])dnl -_AM_IF_OPTION([tar-ustar], [_AM_PROG_TAR([ustar])], - [_AM_IF_OPTION([tar-pax], [_AM_PROG_TAR([pax])], - [_AM_PROG_TAR([v7])])]) -_AM_IF_OPTION([no-dependencies],, -[AC_PROVIDE_IFELSE([AC_PROG_CC], - [_AM_DEPENDENCIES([CC])], - [m4_define([AC_PROG_CC], - m4_defn([AC_PROG_CC])[_AM_DEPENDENCIES([CC])])])dnl -AC_PROVIDE_IFELSE([AC_PROG_CXX], - [_AM_DEPENDENCIES([CXX])], - [m4_define([AC_PROG_CXX], - m4_defn([AC_PROG_CXX])[_AM_DEPENDENCIES([CXX])])])dnl -AC_PROVIDE_IFELSE([AC_PROG_OBJC], - [_AM_DEPENDENCIES([OBJC])], - [m4_define([AC_PROG_OBJC], - m4_defn([AC_PROG_OBJC])[_AM_DEPENDENCIES([OBJC])])])dnl -AC_PROVIDE_IFELSE([AC_PROG_OBJCXX], - [_AM_DEPENDENCIES([OBJCXX])], - [m4_define([AC_PROG_OBJCXX], - m4_defn([AC_PROG_OBJCXX])[_AM_DEPENDENCIES([OBJCXX])])])dnl -]) -AC_REQUIRE([AM_SILENT_RULES])dnl -dnl The testsuite driver may need to know about EXEEXT, so add the -dnl 'am__EXEEXT' conditional if _AM_COMPILER_EXEEXT was seen. This -dnl macro is hooked onto _AC_COMPILER_EXEEXT early, see below. -AC_CONFIG_COMMANDS_PRE(dnl -[m4_provide_if([_AM_COMPILER_EXEEXT], - [AM_CONDITIONAL([am__EXEEXT], [test -n "$EXEEXT"])])])dnl - -# POSIX will say in a future version that running "rm -f" with no argument -# is OK; and we want to be able to make that assumption in our Makefile -# recipes. So use an aggressive probe to check that the usage we want is -# actually supported "in the wild" to an acceptable degree. -# See automake bug#10828. -# To make any issue more visible, cause the running configure to be aborted -# by default if the 'rm' program in use doesn't match our expectations; the -# user can still override this though. -if rm -f && rm -fr && rm -rf; then : OK; else - cat >&2 <<'END' -Oops! - -Your 'rm' program seems unable to run without file operands specified -on the command line, even when the '-f' option is present. This is contrary -to the behaviour of most rm programs out there, and not conforming with -the upcoming POSIX standard: - -Please tell bug-automake@gnu.org about your system, including the value -of your $PATH and any error possibly output before this message. This -can help us improve future automake versions. - -END - if test x"$ACCEPT_INFERIOR_RM_PROGRAM" = x"yes"; then - echo 'Configuration will proceed anyway, since you have set the' >&2 - echo 'ACCEPT_INFERIOR_RM_PROGRAM variable to "yes"' >&2 - echo >&2 - else - cat >&2 <<'END' -Aborting the configuration process, to ensure you take notice of the issue. - -You can download and install GNU coreutils to get an 'rm' implementation -that behaves properly: . - -If you want to complete the configuration process using your problematic -'rm' anyway, export the environment variable ACCEPT_INFERIOR_RM_PROGRAM -to "yes", and re-run configure. - -END - AC_MSG_ERROR([Your 'rm' program is bad, sorry.]) - fi -fi -]) - -dnl Hook into '_AC_COMPILER_EXEEXT' early to learn its expansion. Do not -dnl add the conditional right here, as _AC_COMPILER_EXEEXT may be further -dnl mangled by Autoconf and run in a shell conditional statement. -m4_define([_AC_COMPILER_EXEEXT], -m4_defn([_AC_COMPILER_EXEEXT])[m4_provide([_AM_COMPILER_EXEEXT])]) - -# When config.status generates a header, we must update the stamp-h file. -# This file resides in the same directory as the config header -# that is generated. The stamp files are numbered to have different names. - -# Autoconf calls _AC_AM_CONFIG_HEADER_HOOK (when defined) in the -# loop where config.status creates the headers, so we can generate -# our stamp files there. -AC_DEFUN([_AC_AM_CONFIG_HEADER_HOOK], -[# Compute $1's index in $config_headers. -_am_arg=$1 -_am_stamp_count=1 -for _am_header in $config_headers :; do - case $_am_header in - $_am_arg | $_am_arg:* ) - break ;; - * ) - _am_stamp_count=`expr $_am_stamp_count + 1` ;; - esac -done -echo "timestamp for $_am_arg" >`AS_DIRNAME(["$_am_arg"])`/stamp-h[]$_am_stamp_count]) - -# Copyright (C) 2001-2013 Free Software Foundation, Inc. -# -# This file is free software; the Free Software Foundation -# gives unlimited permission to copy and/or distribute it, -# with or without modifications, as long as this notice is preserved. - -# AM_PROG_INSTALL_SH -# ------------------ -# Define $install_sh. -AC_DEFUN([AM_PROG_INSTALL_SH], -[AC_REQUIRE([AM_AUX_DIR_EXPAND])dnl -if test x"${install_sh}" != xset; then - case $am_aux_dir in - *\ * | *\ *) - install_sh="\${SHELL} '$am_aux_dir/install-sh'" ;; - *) - install_sh="\${SHELL} $am_aux_dir/install-sh" - esac -fi -AC_SUBST([install_sh])]) - -# Copyright (C) 2003-2013 Free Software Foundation, Inc. -# -# This file is free software; the Free Software Foundation -# gives unlimited permission to copy and/or distribute it, -# with or without modifications, as long as this notice is preserved. - -# Check whether the underlying file-system supports filenames -# with a leading dot. For instance MS-DOS doesn't. -AC_DEFUN([AM_SET_LEADING_DOT], -[rm -rf .tst 2>/dev/null -mkdir .tst 2>/dev/null -if test -d .tst; then - am__leading_dot=. -else - am__leading_dot=_ -fi -rmdir .tst 2>/dev/null -AC_SUBST([am__leading_dot])]) - -# Check to see how 'make' treats includes. -*- Autoconf -*- - -# Copyright (C) 2001-2013 Free Software Foundation, Inc. -# -# This file is free software; the Free Software Foundation -# gives unlimited permission to copy and/or distribute it, -# with or without modifications, as long as this notice is preserved. - -# AM_MAKE_INCLUDE() -# ----------------- -# Check to see how make treats includes. -AC_DEFUN([AM_MAKE_INCLUDE], -[am_make=${MAKE-make} -cat > confinc << 'END' -am__doit: - @echo this is the am__doit target -.PHONY: am__doit -END -# If we don't find an include directive, just comment out the code. -AC_MSG_CHECKING([for style of include used by $am_make]) -am__include="#" -am__quote= -_am_result=none -# First try GNU make style include. -echo "include confinc" > confmf -# Ignore all kinds of additional output from 'make'. -case `$am_make -s -f confmf 2> /dev/null` in #( -*the\ am__doit\ target*) - am__include=include - am__quote= - _am_result=GNU - ;; -esac -# Now try BSD make style include. -if test "$am__include" = "#"; then - echo '.include "confinc"' > confmf - case `$am_make -s -f confmf 2> /dev/null` in #( - *the\ am__doit\ target*) - am__include=.include - am__quote="\"" - _am_result=BSD - ;; - esac -fi -AC_SUBST([am__include]) -AC_SUBST([am__quote]) -AC_MSG_RESULT([$_am_result]) -rm -f confinc confmf -]) - -# Fake the existence of programs that GNU maintainers use. -*- Autoconf -*- - -# Copyright (C) 1997-2013 Free Software Foundation, Inc. -# -# This file is free software; the Free Software Foundation -# gives unlimited permission to copy and/or distribute it, -# with or without modifications, as long as this notice is preserved. - -# AM_MISSING_PROG(NAME, PROGRAM) -# ------------------------------ -AC_DEFUN([AM_MISSING_PROG], -[AC_REQUIRE([AM_MISSING_HAS_RUN]) -$1=${$1-"${am_missing_run}$2"} -AC_SUBST($1)]) - -# AM_MISSING_HAS_RUN -# ------------------ -# Define MISSING if not defined so far and test if it is modern enough. -# If it is, set am_missing_run to use it, otherwise, to nothing. -AC_DEFUN([AM_MISSING_HAS_RUN], -[AC_REQUIRE([AM_AUX_DIR_EXPAND])dnl -AC_REQUIRE_AUX_FILE([missing])dnl -if test x"${MISSING+set}" != xset; then - case $am_aux_dir in - *\ * | *\ *) - MISSING="\${SHELL} \"$am_aux_dir/missing\"" ;; - *) - MISSING="\${SHELL} $am_aux_dir/missing" ;; - esac -fi -# Use eval to expand $SHELL -if eval "$MISSING --is-lightweight"; then - am_missing_run="$MISSING " -else - am_missing_run= - AC_MSG_WARN(['missing' script is too old or missing]) -fi -]) - -# Helper functions for option handling. -*- Autoconf -*- - -# Copyright (C) 2001-2013 Free Software Foundation, Inc. -# -# This file is free software; the Free Software Foundation -# gives unlimited permission to copy and/or distribute it, -# with or without modifications, as long as this notice is preserved. - -# _AM_MANGLE_OPTION(NAME) -# ----------------------- -AC_DEFUN([_AM_MANGLE_OPTION], -[[_AM_OPTION_]m4_bpatsubst($1, [[^a-zA-Z0-9_]], [_])]) - -# _AM_SET_OPTION(NAME) -# -------------------- -# Set option NAME. Presently that only means defining a flag for this option. -AC_DEFUN([_AM_SET_OPTION], -[m4_define(_AM_MANGLE_OPTION([$1]), [1])]) - -# _AM_SET_OPTIONS(OPTIONS) -# ------------------------ -# OPTIONS is a space-separated list of Automake options. -AC_DEFUN([_AM_SET_OPTIONS], -[m4_foreach_w([_AM_Option], [$1], [_AM_SET_OPTION(_AM_Option)])]) - -# _AM_IF_OPTION(OPTION, IF-SET, [IF-NOT-SET]) -# ------------------------------------------- -# Execute IF-SET if OPTION is set, IF-NOT-SET otherwise. -AC_DEFUN([_AM_IF_OPTION], -[m4_ifset(_AM_MANGLE_OPTION([$1]), [$2], [$3])]) - -# Copyright (C) 1999-2013 Free Software Foundation, Inc. -# -# This file is free software; the Free Software Foundation -# gives unlimited permission to copy and/or distribute it, -# with or without modifications, as long as this notice is preserved. - -# _AM_PROG_CC_C_O -# --------------- -# Like AC_PROG_CC_C_O, but changed for automake. We rewrite AC_PROG_CC -# to automatically call this. -AC_DEFUN([_AM_PROG_CC_C_O], -[AC_REQUIRE([AM_AUX_DIR_EXPAND])dnl -AC_REQUIRE_AUX_FILE([compile])dnl -AC_LANG_PUSH([C])dnl -AC_CACHE_CHECK( - [whether $CC understands -c and -o together], - [am_cv_prog_cc_c_o], - [AC_LANG_CONFTEST([AC_LANG_PROGRAM([])]) - # Make sure it works both with $CC and with simple cc. - # Following AC_PROG_CC_C_O, we do the test twice because some - # compilers refuse to overwrite an existing .o file with -o, - # though they will create one. - am_cv_prog_cc_c_o=yes - for am_i in 1 2; do - if AM_RUN_LOG([$CC -c conftest.$ac_ext -o conftest2.$ac_objext]) \ - && test -f conftest2.$ac_objext; then - : OK - else - am_cv_prog_cc_c_o=no - break - fi - done - rm -f core conftest* - unset am_i]) -if test "$am_cv_prog_cc_c_o" != yes; then - # Losing compiler, so override with the script. - # FIXME: It is wrong to rewrite CC. - # But if we don't then we get into trouble of one sort or another. - # A longer-term fix would be to have automake use am__CC in this case, - # and then we could set am__CC="\$(top_srcdir)/compile \$(CC)" - CC="$am_aux_dir/compile $CC" -fi -AC_LANG_POP([C])]) - -# For backward compatibility. -AC_DEFUN_ONCE([AM_PROG_CC_C_O], [AC_REQUIRE([AC_PROG_CC])]) - -# Copyright (C) 2001-2013 Free Software Foundation, Inc. -# -# This file is free software; the Free Software Foundation -# gives unlimited permission to copy and/or distribute it, -# with or without modifications, as long as this notice is preserved. - -# AM_RUN_LOG(COMMAND) -# ------------------- -# Run COMMAND, save the exit status in ac_status, and log it. -# (This has been adapted from Autoconf's _AC_RUN_LOG macro.) -AC_DEFUN([AM_RUN_LOG], -[{ echo "$as_me:$LINENO: $1" >&AS_MESSAGE_LOG_FD - ($1) >&AS_MESSAGE_LOG_FD 2>&AS_MESSAGE_LOG_FD - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&AS_MESSAGE_LOG_FD - (exit $ac_status); }]) - -# Check to make sure that the build environment is sane. -*- Autoconf -*- - -# Copyright (C) 1996-2013 Free Software Foundation, Inc. -# -# This file is free software; the Free Software Foundation -# gives unlimited permission to copy and/or distribute it, -# with or without modifications, as long as this notice is preserved. - -# AM_SANITY_CHECK -# --------------- -AC_DEFUN([AM_SANITY_CHECK], -[AC_MSG_CHECKING([whether build environment is sane]) -# Reject unsafe characters in $srcdir or the absolute working directory -# name. Accept space and tab only in the latter. -am_lf=' -' -case `pwd` in - *[[\\\"\#\$\&\'\`$am_lf]]*) - AC_MSG_ERROR([unsafe absolute working directory name]);; -esac -case $srcdir in - *[[\\\"\#\$\&\'\`$am_lf\ \ ]]*) - AC_MSG_ERROR([unsafe srcdir value: '$srcdir']);; -esac - -# Do 'set' in a subshell so we don't clobber the current shell's -# arguments. Must try -L first in case configure is actually a -# symlink; some systems play weird games with the mod time of symlinks -# (eg FreeBSD returns the mod time of the symlink's containing -# directory). -if ( - am_has_slept=no - for am_try in 1 2; do - echo "timestamp, slept: $am_has_slept" > conftest.file - set X `ls -Lt "$srcdir/configure" conftest.file 2> /dev/null` - if test "$[*]" = "X"; then - # -L didn't work. - set X `ls -t "$srcdir/configure" conftest.file` - fi - if test "$[*]" != "X $srcdir/configure conftest.file" \ - && test "$[*]" != "X conftest.file $srcdir/configure"; then - - # If neither matched, then we have a broken ls. This can happen - # if, for instance, CONFIG_SHELL is bash and it inherits a - # broken ls alias from the environment. This has actually - # happened. Such a system could not be considered "sane". - AC_MSG_ERROR([ls -t appears to fail. Make sure there is not a broken - alias in your environment]) - fi - if test "$[2]" = conftest.file || test $am_try -eq 2; then - break - fi - # Just in case. - sleep 1 - am_has_slept=yes - done - test "$[2]" = conftest.file - ) -then - # Ok. - : -else - AC_MSG_ERROR([newly created file is older than distributed files! -Check your system clock]) -fi -AC_MSG_RESULT([yes]) -# If we didn't sleep, we still need to ensure time stamps of config.status and -# generated files are strictly newer. -am_sleep_pid= -if grep 'slept: no' conftest.file >/dev/null 2>&1; then - ( sleep 1 ) & - am_sleep_pid=$! -fi -AC_CONFIG_COMMANDS_PRE( - [AC_MSG_CHECKING([that generated files are newer than configure]) - if test -n "$am_sleep_pid"; then - # Hide warnings about reused PIDs. - wait $am_sleep_pid 2>/dev/null - fi - AC_MSG_RESULT([done])]) -rm -f conftest.file -]) - -# Copyright (C) 2009-2013 Free Software Foundation, Inc. -# -# This file is free software; the Free Software Foundation -# gives unlimited permission to copy and/or distribute it, -# with or without modifications, as long as this notice is preserved. - -# AM_SILENT_RULES([DEFAULT]) -# -------------------------- -# Enable less verbose build rules; with the default set to DEFAULT -# ("yes" being less verbose, "no" or empty being verbose). -AC_DEFUN([AM_SILENT_RULES], -[AC_ARG_ENABLE([silent-rules], [dnl -AS_HELP_STRING( - [--enable-silent-rules], - [less verbose build output (undo: "make V=1")]) -AS_HELP_STRING( - [--disable-silent-rules], - [verbose build output (undo: "make V=0")])dnl -]) -case $enable_silent_rules in @%:@ ((( - yes) AM_DEFAULT_VERBOSITY=0;; - no) AM_DEFAULT_VERBOSITY=1;; - *) AM_DEFAULT_VERBOSITY=m4_if([$1], [yes], [0], [1]);; -esac -dnl -dnl A few 'make' implementations (e.g., NonStop OS and NextStep) -dnl do not support nested variable expansions. -dnl See automake bug#9928 and bug#10237. -am_make=${MAKE-make} -AC_CACHE_CHECK([whether $am_make supports nested variables], - [am_cv_make_support_nested_variables], - [if AS_ECHO([['TRUE=$(BAR$(V)) -BAR0=false -BAR1=true -V=1 -am__doit: - @$(TRUE) -.PHONY: am__doit']]) | $am_make -f - >/dev/null 2>&1; then - am_cv_make_support_nested_variables=yes -else - am_cv_make_support_nested_variables=no -fi]) -if test $am_cv_make_support_nested_variables = yes; then - dnl Using '$V' instead of '$(V)' breaks IRIX make. - AM_V='$(V)' - AM_DEFAULT_V='$(AM_DEFAULT_VERBOSITY)' -else - AM_V=$AM_DEFAULT_VERBOSITY - AM_DEFAULT_V=$AM_DEFAULT_VERBOSITY -fi -AC_SUBST([AM_V])dnl -AM_SUBST_NOTMAKE([AM_V])dnl -AC_SUBST([AM_DEFAULT_V])dnl -AM_SUBST_NOTMAKE([AM_DEFAULT_V])dnl -AC_SUBST([AM_DEFAULT_VERBOSITY])dnl -AM_BACKSLASH='\' -AC_SUBST([AM_BACKSLASH])dnl -_AM_SUBST_NOTMAKE([AM_BACKSLASH])dnl -]) - -# Copyright (C) 2001-2013 Free Software Foundation, Inc. -# -# This file is free software; the Free Software Foundation -# gives unlimited permission to copy and/or distribute it, -# with or without modifications, as long as this notice is preserved. - -# AM_PROG_INSTALL_STRIP -# --------------------- -# One issue with vendor 'install' (even GNU) is that you can't -# specify the program used to strip binaries. This is especially -# annoying in cross-compiling environments, where the build's strip -# is unlikely to handle the host's binaries. -# Fortunately install-sh will honor a STRIPPROG variable, so we -# always use install-sh in "make install-strip", and initialize -# STRIPPROG with the value of the STRIP variable (set by the user). -AC_DEFUN([AM_PROG_INSTALL_STRIP], -[AC_REQUIRE([AM_PROG_INSTALL_SH])dnl -# Installed binaries are usually stripped using 'strip' when the user -# run "make install-strip". However 'strip' might not be the right -# tool to use in cross-compilation environments, therefore Automake -# will honor the 'STRIP' environment variable to overrule this program. -dnl Don't test for $cross_compiling = yes, because it might be 'maybe'. -if test "$cross_compiling" != no; then - AC_CHECK_TOOL([STRIP], [strip], :) -fi -INSTALL_STRIP_PROGRAM="\$(install_sh) -c -s" -AC_SUBST([INSTALL_STRIP_PROGRAM])]) - -# Copyright (C) 2006-2013 Free Software Foundation, Inc. -# -# This file is free software; the Free Software Foundation -# gives unlimited permission to copy and/or distribute it, -# with or without modifications, as long as this notice is preserved. - -# _AM_SUBST_NOTMAKE(VARIABLE) -# --------------------------- -# Prevent Automake from outputting VARIABLE = @VARIABLE@ in Makefile.in. -# This macro is traced by Automake. -AC_DEFUN([_AM_SUBST_NOTMAKE]) - -# AM_SUBST_NOTMAKE(VARIABLE) -# -------------------------- -# Public sister of _AM_SUBST_NOTMAKE. -AC_DEFUN([AM_SUBST_NOTMAKE], [_AM_SUBST_NOTMAKE($@)]) - -# Check how to create a tarball. -*- Autoconf -*- - -# Copyright (C) 2004-2013 Free Software Foundation, Inc. -# -# This file is free software; the Free Software Foundation -# gives unlimited permission to copy and/or distribute it, -# with or without modifications, as long as this notice is preserved. - -# _AM_PROG_TAR(FORMAT) -# -------------------- -# Check how to create a tarball in format FORMAT. -# FORMAT should be one of 'v7', 'ustar', or 'pax'. -# -# Substitute a variable $(am__tar) that is a command -# writing to stdout a FORMAT-tarball containing the directory -# $tardir. -# tardir=directory && $(am__tar) > result.tar -# -# Substitute a variable $(am__untar) that extract such -# a tarball read from stdin. -# $(am__untar) < result.tar -# -AC_DEFUN([_AM_PROG_TAR], -[# Always define AMTAR for backward compatibility. Yes, it's still used -# in the wild :-( We should find a proper way to deprecate it ... -AC_SUBST([AMTAR], ['$${TAR-tar}']) - -# We'll loop over all known methods to create a tar archive until one works. -_am_tools='gnutar m4_if([$1], [ustar], [plaintar]) pax cpio none' - -m4_if([$1], [v7], - [am__tar='$${TAR-tar} chof - "$$tardir"' am__untar='$${TAR-tar} xf -'], - - [m4_case([$1], - [ustar], - [# The POSIX 1988 'ustar' format is defined with fixed-size fields. - # There is notably a 21 bits limit for the UID and the GID. In fact, - # the 'pax' utility can hang on bigger UID/GID (see automake bug#8343 - # and bug#13588). - am_max_uid=2097151 # 2^21 - 1 - am_max_gid=$am_max_uid - # The $UID and $GID variables are not portable, so we need to resort - # to the POSIX-mandated id(1) utility. Errors in the 'id' calls - # below are definitely unexpected, so allow the users to see them - # (that is, avoid stderr redirection). - am_uid=`id -u || echo unknown` - am_gid=`id -g || echo unknown` - AC_MSG_CHECKING([whether UID '$am_uid' is supported by ustar format]) - if test $am_uid -le $am_max_uid; then - AC_MSG_RESULT([yes]) - else - AC_MSG_RESULT([no]) - _am_tools=none - fi - AC_MSG_CHECKING([whether GID '$am_gid' is supported by ustar format]) - if test $am_gid -le $am_max_gid; then - AC_MSG_RESULT([yes]) - else - AC_MSG_RESULT([no]) - _am_tools=none - fi], - - [pax], - [], - - [m4_fatal([Unknown tar format])]) - - AC_MSG_CHECKING([how to create a $1 tar archive]) - - # Go ahead even if we have the value already cached. We do so because we - # need to set the values for the 'am__tar' and 'am__untar' variables. - _am_tools=${am_cv_prog_tar_$1-$_am_tools} - - for _am_tool in $_am_tools; do - case $_am_tool in - gnutar) - for _am_tar in tar gnutar gtar; do - AM_RUN_LOG([$_am_tar --version]) && break - done - am__tar="$_am_tar --format=m4_if([$1], [pax], [posix], [$1]) -chf - "'"$$tardir"' - am__tar_="$_am_tar --format=m4_if([$1], [pax], [posix], [$1]) -chf - "'"$tardir"' - am__untar="$_am_tar -xf -" - ;; - plaintar) - # Must skip GNU tar: if it does not support --format= it doesn't create - # ustar tarball either. - (tar --version) >/dev/null 2>&1 && continue - am__tar='tar chf - "$$tardir"' - am__tar_='tar chf - "$tardir"' - am__untar='tar xf -' - ;; - pax) - am__tar='pax -L -x $1 -w "$$tardir"' - am__tar_='pax -L -x $1 -w "$tardir"' - am__untar='pax -r' - ;; - cpio) - am__tar='find "$$tardir" -print | cpio -o -H $1 -L' - am__tar_='find "$tardir" -print | cpio -o -H $1 -L' - am__untar='cpio -i -H $1 -d' - ;; - none) - am__tar=false - am__tar_=false - am__untar=false - ;; - esac - - # If the value was cached, stop now. We just wanted to have am__tar - # and am__untar set. - test -n "${am_cv_prog_tar_$1}" && break - - # tar/untar a dummy directory, and stop if the command works. - rm -rf conftest.dir - mkdir conftest.dir - echo GrepMe > conftest.dir/file - AM_RUN_LOG([tardir=conftest.dir && eval $am__tar_ >conftest.tar]) - rm -rf conftest.dir - if test -s conftest.tar; then - AM_RUN_LOG([$am__untar /dev/null 2>&1 && break - fi - done - rm -rf conftest.dir - - AC_CACHE_VAL([am_cv_prog_tar_$1], [am_cv_prog_tar_$1=$_am_tool]) - AC_MSG_RESULT([$am_cv_prog_tar_$1])]) - -AC_SUBST([am__tar]) -AC_SUBST([am__untar]) -]) # _AM_PROG_TAR - -m4_include([m4/ax_boost_base.m4]) -m4_include([m4/ax_boost_iostreams.m4]) -m4_include([m4/ax_boost_system.m4]) -m4_include([m4/ax_cxx_compile_stdcxx.m4]) -m4_include([m4/ax_pthread.m4]) -m4_include([m4/ev++.m4]) -m4_include([m4/mysql++.m4]) -m4_include([m4/mysql_loc.m4]) -m4_include([m4/tcmalloc.m4]) diff --git a/compile b/compile deleted file mode 100755 index a85b723..0000000 --- a/compile +++ /dev/null @@ -1,347 +0,0 @@ -#! /bin/sh -# Wrapper for compilers which do not understand '-c -o'. - -scriptversion=2012-10-14.11; # UTC - -# Copyright (C) 1999-2014 Free Software Foundation, Inc. -# Written by Tom Tromey . -# -# This program is free software; you can redistribute it and/or modify -# it under the terms of the GNU General Public License as published by -# the Free Software Foundation; either version 2, or (at your option) -# any later version. -# -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. -# -# You should have received a copy of the GNU General Public License -# along with this program. If not, see . - -# As a special exception to the GNU General Public License, if you -# distribute this file as part of a program that contains a -# configuration script generated by Autoconf, you may include it under -# the same distribution terms that you use for the rest of that program. - -# This file is maintained in Automake, please report -# bugs to or send patches to -# . - -nl=' -' - -# We need space, tab and new line, in precisely that order. Quoting is -# there to prevent tools from complaining about whitespace usage. -IFS=" "" $nl" - -file_conv= - -# func_file_conv build_file lazy -# Convert a $build file to $host form and store it in $file -# Currently only supports Windows hosts. If the determined conversion -# type is listed in (the comma separated) LAZY, no conversion will -# take place. -func_file_conv () -{ - file=$1 - case $file in - / | /[!/]*) # absolute file, and not a UNC file - if test -z "$file_conv"; then - # lazily determine how to convert abs files - case `uname -s` in - MINGW*) - file_conv=mingw - ;; - CYGWIN*) - file_conv=cygwin - ;; - *) - file_conv=wine - ;; - esac - fi - case $file_conv/,$2, in - *,$file_conv,*) - ;; - mingw/*) - file=`cmd //C echo "$file " | sed -e 's/"\(.*\) " *$/\1/'` - ;; - cygwin/*) - file=`cygpath -m "$file" || echo "$file"` - ;; - wine/*) - file=`winepath -w "$file" || echo "$file"` - ;; - esac - ;; - esac -} - -# func_cl_dashL linkdir -# Make cl look for libraries in LINKDIR -func_cl_dashL () -{ - func_file_conv "$1" - if test -z "$lib_path"; then - lib_path=$file - else - lib_path="$lib_path;$file" - fi - linker_opts="$linker_opts -LIBPATH:$file" -} - -# func_cl_dashl library -# Do a library search-path lookup for cl -func_cl_dashl () -{ - lib=$1 - found=no - save_IFS=$IFS - IFS=';' - for dir in $lib_path $LIB - do - IFS=$save_IFS - if $shared && test -f "$dir/$lib.dll.lib"; then - found=yes - lib=$dir/$lib.dll.lib - break - fi - if test -f "$dir/$lib.lib"; then - found=yes - lib=$dir/$lib.lib - break - fi - if test -f "$dir/lib$lib.a"; then - found=yes - lib=$dir/lib$lib.a - break - fi - done - IFS=$save_IFS - - if test "$found" != yes; then - lib=$lib.lib - fi -} - -# func_cl_wrapper cl arg... -# Adjust compile command to suit cl -func_cl_wrapper () -{ - # Assume a capable shell - lib_path= - shared=: - linker_opts= - for arg - do - if test -n "$eat"; then - eat= - else - case $1 in - -o) - # configure might choose to run compile as 'compile cc -o foo foo.c'. - eat=1 - case $2 in - *.o | *.[oO][bB][jJ]) - func_file_conv "$2" - set x "$@" -Fo"$file" - shift - ;; - *) - func_file_conv "$2" - set x "$@" -Fe"$file" - shift - ;; - esac - ;; - -I) - eat=1 - func_file_conv "$2" mingw - set x "$@" -I"$file" - shift - ;; - -I*) - func_file_conv "${1#-I}" mingw - set x "$@" -I"$file" - shift - ;; - -l) - eat=1 - func_cl_dashl "$2" - set x "$@" "$lib" - shift - ;; - -l*) - func_cl_dashl "${1#-l}" - set x "$@" "$lib" - shift - ;; - -L) - eat=1 - func_cl_dashL "$2" - ;; - -L*) - func_cl_dashL "${1#-L}" - ;; - -static) - shared=false - ;; - -Wl,*) - arg=${1#-Wl,} - save_ifs="$IFS"; IFS=',' - for flag in $arg; do - IFS="$save_ifs" - linker_opts="$linker_opts $flag" - done - IFS="$save_ifs" - ;; - -Xlinker) - eat=1 - linker_opts="$linker_opts $2" - ;; - -*) - set x "$@" "$1" - shift - ;; - *.cc | *.CC | *.cxx | *.CXX | *.[cC]++) - func_file_conv "$1" - set x "$@" -Tp"$file" - shift - ;; - *.c | *.cpp | *.CPP | *.lib | *.LIB | *.Lib | *.OBJ | *.obj | *.[oO]) - func_file_conv "$1" mingw - set x "$@" "$file" - shift - ;; - *) - set x "$@" "$1" - shift - ;; - esac - fi - shift - done - if test -n "$linker_opts"; then - linker_opts="-link$linker_opts" - fi - exec "$@" $linker_opts - exit 1 -} - -eat= - -case $1 in - '') - echo "$0: No command. Try '$0 --help' for more information." 1>&2 - exit 1; - ;; - -h | --h*) - cat <<\EOF -Usage: compile [--help] [--version] PROGRAM [ARGS] - -Wrapper for compilers which do not understand '-c -o'. -Remove '-o dest.o' from ARGS, run PROGRAM with the remaining -arguments, and rename the output as expected. - -If you are trying to build a whole package this is not the -right script to run: please start by reading the file 'INSTALL'. - -Report bugs to . -EOF - exit $? - ;; - -v | --v*) - echo "compile $scriptversion" - exit $? - ;; - cl | *[/\\]cl | cl.exe | *[/\\]cl.exe ) - func_cl_wrapper "$@" # Doesn't return... - ;; -esac - -ofile= -cfile= - -for arg -do - if test -n "$eat"; then - eat= - else - case $1 in - -o) - # configure might choose to run compile as 'compile cc -o foo foo.c'. - # So we strip '-o arg' only if arg is an object. - eat=1 - case $2 in - *.o | *.obj) - ofile=$2 - ;; - *) - set x "$@" -o "$2" - shift - ;; - esac - ;; - *.c) - cfile=$1 - set x "$@" "$1" - shift - ;; - *) - set x "$@" "$1" - shift - ;; - esac - fi - shift -done - -if test -z "$ofile" || test -z "$cfile"; then - # If no '-o' option was seen then we might have been invoked from a - # pattern rule where we don't need one. That is ok -- this is a - # normal compilation that the losing compiler can handle. If no - # '.c' file was seen then we are probably linking. That is also - # ok. - exec "$@" -fi - -# Name of file we expect compiler to create. -cofile=`echo "$cfile" | sed 's|^.*[\\/]||; s|^[a-zA-Z]:||; s/\.c$/.o/'` - -# Create the lock directory. -# Note: use '[/\\:.-]' here to ensure that we don't use the same name -# that we are using for the .o file. Also, base the name on the expected -# object file name, since that is what matters with a parallel build. -lockdir=`echo "$cofile" | sed -e 's|[/\\:.-]|_|g'`.d -while true; do - if mkdir "$lockdir" >/dev/null 2>&1; then - break - fi - sleep 1 -done -# FIXME: race condition here if user kills between mkdir and trap. -trap "rmdir '$lockdir'; exit 1" 1 2 15 - -# Run the compile. -"$@" -ret=$? - -if test -f "$cofile"; then - test "$cofile" = "$ofile" || mv "$cofile" "$ofile" -elif test -f "${cofile}bj"; then - test "${cofile}bj" = "$ofile" || mv "${cofile}bj" "$ofile" -fi - -rmdir "$lockdir" -exit $ret - -# Local Variables: -# mode: shell-script -# sh-indentation: 2 -# eval: (add-hook 'write-file-hooks 'time-stamp) -# time-stamp-start: "scriptversion=" -# time-stamp-format: "%:y-%02m-%02d.%02H" -# time-stamp-time-zone: "UTC" -# time-stamp-end: "; # UTC" -# End: diff --git a/configure.ac b/configure.ac deleted file mode 100644 index 62a22ab..0000000 --- a/configure.ac +++ /dev/null @@ -1,26 +0,0 @@ -# Ocelot Configure script -# Generate ./configure using autoreconf (or autoconf for the brave) - -AC_INIT(ocelot, 1.1) -AC_CONFIG_SRCDIR([src/ocelot.h]) -AC_CONFIG_MACRO_DIRS([m4]) - -AC_FUNC_ERROR_AT_LINE -AC_FUNC_FORK -AC_CHECK_FUNCS([ftruncate memset socket strerror]) - -AM_INIT_AUTOMAKE([1.11 no-define foreign]) -AC_PROG_CXX -AC_CONFIG_FILES([Makefile src/Makefile]) -AC_LANG([C++]) -AX_CXX_COMPILE_STDCXX(11, noext, mandatory) -AX_BOOST_BASE([1.37], [], [AC_MSG_ERROR(Need boost >= 1.37)]) -AX_BOOST_IOSTREAMS -AX_BOOST_SYSTEM -AX_PTHREAD([], AC_MSG_FAILURE([pthread library is required])) -EV_DEVEL -MYSQL_C_API_LOCATION -MYSQLPP_DEVEL -TCMALLOC - -AC_OUTPUT diff --git a/depcomp b/depcomp deleted file mode 100755 index 4ebd5b3..0000000 --- a/depcomp +++ /dev/null @@ -1,791 +0,0 @@ -#! /bin/sh -# depcomp - compile a program generating dependencies as side-effects - -scriptversion=2013-05-30.07; # UTC - -# Copyright (C) 1999-2013 Free Software Foundation, Inc. - -# This program is free software; you can redistribute it and/or modify -# it under the terms of the GNU General Public License as published by -# the Free Software Foundation; either version 2, or (at your option) -# any later version. - -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. - -# You should have received a copy of the GNU General Public License -# along with this program. If not, see . - -# As a special exception to the GNU General Public License, if you -# distribute this file as part of a program that contains a -# configuration script generated by Autoconf, you may include it under -# the same distribution terms that you use for the rest of that program. - -# Originally written by Alexandre Oliva . - -case $1 in - '') - echo "$0: No command. Try '$0 --help' for more information." 1>&2 - exit 1; - ;; - -h | --h*) - cat <<\EOF -Usage: depcomp [--help] [--version] PROGRAM [ARGS] - -Run PROGRAMS ARGS to compile a file, generating dependencies -as side-effects. - -Environment variables: - depmode Dependency tracking mode. - source Source file read by 'PROGRAMS ARGS'. - object Object file output by 'PROGRAMS ARGS'. - DEPDIR directory where to store dependencies. - depfile Dependency file to output. - tmpdepfile Temporary file to use when outputting dependencies. - libtool Whether libtool is used (yes/no). - -Report bugs to . -EOF - exit $? - ;; - -v | --v*) - echo "depcomp $scriptversion" - exit $? - ;; -esac - -# Get the directory component of the given path, and save it in the -# global variables '$dir'. Note that this directory component will -# be either empty or ending with a '/' character. This is deliberate. -set_dir_from () -{ - case $1 in - */*) dir=`echo "$1" | sed -e 's|/[^/]*$|/|'`;; - *) dir=;; - esac -} - -# Get the suffix-stripped basename of the given path, and save it the -# global variable '$base'. -set_base_from () -{ - base=`echo "$1" | sed -e 's|^.*/||' -e 's/\.[^.]*$//'` -} - -# If no dependency file was actually created by the compiler invocation, -# we still have to create a dummy depfile, to avoid errors with the -# Makefile "include basename.Plo" scheme. -make_dummy_depfile () -{ - echo "#dummy" > "$depfile" -} - -# Factor out some common post-processing of the generated depfile. -# Requires the auxiliary global variable '$tmpdepfile' to be set. -aix_post_process_depfile () -{ - # If the compiler actually managed to produce a dependency file, - # post-process it. - if test -f "$tmpdepfile"; then - # Each line is of the form 'foo.o: dependency.h'. - # Do two passes, one to just change these to - # $object: dependency.h - # and one to simply output - # dependency.h: - # which is needed to avoid the deleted-header problem. - { sed -e "s,^.*\.[$lower]*:,$object:," < "$tmpdepfile" - sed -e "s,^.*\.[$lower]*:[$tab ]*,," -e 's,$,:,' < "$tmpdepfile" - } > "$depfile" - rm -f "$tmpdepfile" - else - make_dummy_depfile - fi -} - -# A tabulation character. -tab=' ' -# A newline character. -nl=' -' -# Character ranges might be problematic outside the C locale. -# These definitions help. -upper=ABCDEFGHIJKLMNOPQRSTUVWXYZ -lower=abcdefghijklmnopqrstuvwxyz -digits=0123456789 -alpha=${upper}${lower} - -if test -z "$depmode" || test -z "$source" || test -z "$object"; then - echo "depcomp: Variables source, object and depmode must be set" 1>&2 - exit 1 -fi - -# Dependencies for sub/bar.o or sub/bar.obj go into sub/.deps/bar.Po. -depfile=${depfile-`echo "$object" | - sed 's|[^\\/]*$|'${DEPDIR-.deps}'/&|;s|\.\([^.]*\)$|.P\1|;s|Pobj$|Po|'`} -tmpdepfile=${tmpdepfile-`echo "$depfile" | sed 's/\.\([^.]*\)$/.T\1/'`} - -rm -f "$tmpdepfile" - -# Avoid interferences from the environment. -gccflag= dashmflag= - -# Some modes work just like other modes, but use different flags. We -# parameterize here, but still list the modes in the big case below, -# to make depend.m4 easier to write. Note that we *cannot* use a case -# here, because this file can only contain one case statement. -if test "$depmode" = hp; then - # HP compiler uses -M and no extra arg. - gccflag=-M - depmode=gcc -fi - -if test "$depmode" = dashXmstdout; then - # This is just like dashmstdout with a different argument. - dashmflag=-xM - depmode=dashmstdout -fi - -cygpath_u="cygpath -u -f -" -if test "$depmode" = msvcmsys; then - # This is just like msvisualcpp but w/o cygpath translation. - # Just convert the backslash-escaped backslashes to single forward - # slashes to satisfy depend.m4 - cygpath_u='sed s,\\\\,/,g' - depmode=msvisualcpp -fi - -if test "$depmode" = msvc7msys; then - # This is just like msvc7 but w/o cygpath translation. - # Just convert the backslash-escaped backslashes to single forward - # slashes to satisfy depend.m4 - cygpath_u='sed s,\\\\,/,g' - depmode=msvc7 -fi - -if test "$depmode" = xlc; then - # IBM C/C++ Compilers xlc/xlC can output gcc-like dependency information. - gccflag=-qmakedep=gcc,-MF - depmode=gcc -fi - -case "$depmode" in -gcc3) -## gcc 3 implements dependency tracking that does exactly what -## we want. Yay! Note: for some reason libtool 1.4 doesn't like -## it if -MD -MP comes after the -MF stuff. Hmm. -## Unfortunately, FreeBSD c89 acceptance of flags depends upon -## the command line argument order; so add the flags where they -## appear in depend2.am. Note that the slowdown incurred here -## affects only configure: in makefiles, %FASTDEP% shortcuts this. - for arg - do - case $arg in - -c) set fnord "$@" -MT "$object" -MD -MP -MF "$tmpdepfile" "$arg" ;; - *) set fnord "$@" "$arg" ;; - esac - shift # fnord - shift # $arg - done - "$@" - stat=$? - if test $stat -ne 0; then - rm -f "$tmpdepfile" - exit $stat - fi - mv "$tmpdepfile" "$depfile" - ;; - -gcc) -## Note that this doesn't just cater to obsosete pre-3.x GCC compilers. -## but also to in-use compilers like IMB xlc/xlC and the HP C compiler. -## (see the conditional assignment to $gccflag above). -## There are various ways to get dependency output from gcc. Here's -## why we pick this rather obscure method: -## - Don't want to use -MD because we'd like the dependencies to end -## up in a subdir. Having to rename by hand is ugly. -## (We might end up doing this anyway to support other compilers.) -## - The DEPENDENCIES_OUTPUT environment variable makes gcc act like -## -MM, not -M (despite what the docs say). Also, it might not be -## supported by the other compilers which use the 'gcc' depmode. -## - Using -M directly means running the compiler twice (even worse -## than renaming). - if test -z "$gccflag"; then - gccflag=-MD, - fi - "$@" -Wp,"$gccflag$tmpdepfile" - stat=$? - if test $stat -ne 0; then - rm -f "$tmpdepfile" - exit $stat - fi - rm -f "$depfile" - echo "$object : \\" > "$depfile" - # The second -e expression handles DOS-style file names with drive - # letters. - sed -e 's/^[^:]*: / /' \ - -e 's/^['$alpha']:\/[^:]*: / /' < "$tmpdepfile" >> "$depfile" -## This next piece of magic avoids the "deleted header file" problem. -## The problem is that when a header file which appears in a .P file -## is deleted, the dependency causes make to die (because there is -## typically no way to rebuild the header). We avoid this by adding -## dummy dependencies for each header file. Too bad gcc doesn't do -## this for us directly. -## Some versions of gcc put a space before the ':'. On the theory -## that the space means something, we add a space to the output as -## well. hp depmode also adds that space, but also prefixes the VPATH -## to the object. Take care to not repeat it in the output. -## Some versions of the HPUX 10.20 sed can't process this invocation -## correctly. Breaking it into two sed invocations is a workaround. - tr ' ' "$nl" < "$tmpdepfile" \ - | sed -e 's/^\\$//' -e '/^$/d' -e "s|.*$object$||" -e '/:$/d' \ - | sed -e 's/$/ :/' >> "$depfile" - rm -f "$tmpdepfile" - ;; - -hp) - # This case exists only to let depend.m4 do its work. It works by - # looking at the text of this script. This case will never be run, - # since it is checked for above. - exit 1 - ;; - -sgi) - if test "$libtool" = yes; then - "$@" "-Wp,-MDupdate,$tmpdepfile" - else - "$@" -MDupdate "$tmpdepfile" - fi - stat=$? - if test $stat -ne 0; then - rm -f "$tmpdepfile" - exit $stat - fi - rm -f "$depfile" - - if test -f "$tmpdepfile"; then # yes, the sourcefile depend on other files - echo "$object : \\" > "$depfile" - # Clip off the initial element (the dependent). Don't try to be - # clever and replace this with sed code, as IRIX sed won't handle - # lines with more than a fixed number of characters (4096 in - # IRIX 6.2 sed, 8192 in IRIX 6.5). We also remove comment lines; - # the IRIX cc adds comments like '#:fec' to the end of the - # dependency line. - tr ' ' "$nl" < "$tmpdepfile" \ - | sed -e 's/^.*\.o://' -e 's/#.*$//' -e '/^$/ d' \ - | tr "$nl" ' ' >> "$depfile" - echo >> "$depfile" - # The second pass generates a dummy entry for each header file. - tr ' ' "$nl" < "$tmpdepfile" \ - | sed -e 's/^.*\.o://' -e 's/#.*$//' -e '/^$/ d' -e 's/$/:/' \ - >> "$depfile" - else - make_dummy_depfile - fi - rm -f "$tmpdepfile" - ;; - -xlc) - # This case exists only to let depend.m4 do its work. It works by - # looking at the text of this script. This case will never be run, - # since it is checked for above. - exit 1 - ;; - -aix) - # The C for AIX Compiler uses -M and outputs the dependencies - # in a .u file. In older versions, this file always lives in the - # current directory. Also, the AIX compiler puts '$object:' at the - # start of each line; $object doesn't have directory information. - # Version 6 uses the directory in both cases. - set_dir_from "$object" - set_base_from "$object" - if test "$libtool" = yes; then - tmpdepfile1=$dir$base.u - tmpdepfile2=$base.u - tmpdepfile3=$dir.libs/$base.u - "$@" -Wc,-M - else - tmpdepfile1=$dir$base.u - tmpdepfile2=$dir$base.u - tmpdepfile3=$dir$base.u - "$@" -M - fi - stat=$? - if test $stat -ne 0; then - rm -f "$tmpdepfile1" "$tmpdepfile2" "$tmpdepfile3" - exit $stat - fi - - for tmpdepfile in "$tmpdepfile1" "$tmpdepfile2" "$tmpdepfile3" - do - test -f "$tmpdepfile" && break - done - aix_post_process_depfile - ;; - -tcc) - # tcc (Tiny C Compiler) understand '-MD -MF file' since version 0.9.26 - # FIXME: That version still under development at the moment of writing. - # Make that this statement remains true also for stable, released - # versions. - # It will wrap lines (doesn't matter whether long or short) with a - # trailing '\', as in: - # - # foo.o : \ - # foo.c \ - # foo.h \ - # - # It will put a trailing '\' even on the last line, and will use leading - # spaces rather than leading tabs (at least since its commit 0394caf7 - # "Emit spaces for -MD"). - "$@" -MD -MF "$tmpdepfile" - stat=$? - if test $stat -ne 0; then - rm -f "$tmpdepfile" - exit $stat - fi - rm -f "$depfile" - # Each non-empty line is of the form 'foo.o : \' or ' dep.h \'. - # We have to change lines of the first kind to '$object: \'. - sed -e "s|.*:|$object :|" < "$tmpdepfile" > "$depfile" - # And for each line of the second kind, we have to emit a 'dep.h:' - # dummy dependency, to avoid the deleted-header problem. - sed -n -e 's|^ *\(.*\) *\\$|\1:|p' < "$tmpdepfile" >> "$depfile" - rm -f "$tmpdepfile" - ;; - -## The order of this option in the case statement is important, since the -## shell code in configure will try each of these formats in the order -## listed in this file. A plain '-MD' option would be understood by many -## compilers, so we must ensure this comes after the gcc and icc options. -pgcc) - # Portland's C compiler understands '-MD'. - # Will always output deps to 'file.d' where file is the root name of the - # source file under compilation, even if file resides in a subdirectory. - # The object file name does not affect the name of the '.d' file. - # pgcc 10.2 will output - # foo.o: sub/foo.c sub/foo.h - # and will wrap long lines using '\' : - # foo.o: sub/foo.c ... \ - # sub/foo.h ... \ - # ... - set_dir_from "$object" - # Use the source, not the object, to determine the base name, since - # that's sadly what pgcc will do too. - set_base_from "$source" - tmpdepfile=$base.d - - # For projects that build the same source file twice into different object - # files, the pgcc approach of using the *source* file root name can cause - # problems in parallel builds. Use a locking strategy to avoid stomping on - # the same $tmpdepfile. - lockdir=$base.d-lock - trap " - echo '$0: caught signal, cleaning up...' >&2 - rmdir '$lockdir' - exit 1 - " 1 2 13 15 - numtries=100 - i=$numtries - while test $i -gt 0; do - # mkdir is a portable test-and-set. - if mkdir "$lockdir" 2>/dev/null; then - # This process acquired the lock. - "$@" -MD - stat=$? - # Release the lock. - rmdir "$lockdir" - break - else - # If the lock is being held by a different process, wait - # until the winning process is done or we timeout. - while test -d "$lockdir" && test $i -gt 0; do - sleep 1 - i=`expr $i - 1` - done - fi - i=`expr $i - 1` - done - trap - 1 2 13 15 - if test $i -le 0; then - echo "$0: failed to acquire lock after $numtries attempts" >&2 - echo "$0: check lockdir '$lockdir'" >&2 - exit 1 - fi - - if test $stat -ne 0; then - rm -f "$tmpdepfile" - exit $stat - fi - rm -f "$depfile" - # Each line is of the form `foo.o: dependent.h', - # or `foo.o: dep1.h dep2.h \', or ` dep3.h dep4.h \'. - # Do two passes, one to just change these to - # `$object: dependent.h' and one to simply `dependent.h:'. - sed "s,^[^:]*:,$object :," < "$tmpdepfile" > "$depfile" - # Some versions of the HPUX 10.20 sed can't process this invocation - # correctly. Breaking it into two sed invocations is a workaround. - sed 's,^[^:]*: \(.*\)$,\1,;s/^\\$//;/^$/d;/:$/d' < "$tmpdepfile" \ - | sed -e 's/$/ :/' >> "$depfile" - rm -f "$tmpdepfile" - ;; - -hp2) - # The "hp" stanza above does not work with aCC (C++) and HP's ia64 - # compilers, which have integrated preprocessors. The correct option - # to use with these is +Maked; it writes dependencies to a file named - # 'foo.d', which lands next to the object file, wherever that - # happens to be. - # Much of this is similar to the tru64 case; see comments there. - set_dir_from "$object" - set_base_from "$object" - if test "$libtool" = yes; then - tmpdepfile1=$dir$base.d - tmpdepfile2=$dir.libs/$base.d - "$@" -Wc,+Maked - else - tmpdepfile1=$dir$base.d - tmpdepfile2=$dir$base.d - "$@" +Maked - fi - stat=$? - if test $stat -ne 0; then - rm -f "$tmpdepfile1" "$tmpdepfile2" - exit $stat - fi - - for tmpdepfile in "$tmpdepfile1" "$tmpdepfile2" - do - test -f "$tmpdepfile" && break - done - if test -f "$tmpdepfile"; then - sed -e "s,^.*\.[$lower]*:,$object:," "$tmpdepfile" > "$depfile" - # Add 'dependent.h:' lines. - sed -ne '2,${ - s/^ *// - s/ \\*$// - s/$/:/ - p - }' "$tmpdepfile" >> "$depfile" - else - make_dummy_depfile - fi - rm -f "$tmpdepfile" "$tmpdepfile2" - ;; - -tru64) - # The Tru64 compiler uses -MD to generate dependencies as a side - # effect. 'cc -MD -o foo.o ...' puts the dependencies into 'foo.o.d'. - # At least on Alpha/Redhat 6.1, Compaq CCC V6.2-504 seems to put - # dependencies in 'foo.d' instead, so we check for that too. - # Subdirectories are respected. - set_dir_from "$object" - set_base_from "$object" - - if test "$libtool" = yes; then - # Libtool generates 2 separate objects for the 2 libraries. These - # two compilations output dependencies in $dir.libs/$base.o.d and - # in $dir$base.o.d. We have to check for both files, because - # one of the two compilations can be disabled. We should prefer - # $dir$base.o.d over $dir.libs/$base.o.d because the latter is - # automatically cleaned when .libs/ is deleted, while ignoring - # the former would cause a distcleancheck panic. - tmpdepfile1=$dir$base.o.d # libtool 1.5 - tmpdepfile2=$dir.libs/$base.o.d # Likewise. - tmpdepfile3=$dir.libs/$base.d # Compaq CCC V6.2-504 - "$@" -Wc,-MD - else - tmpdepfile1=$dir$base.d - tmpdepfile2=$dir$base.d - tmpdepfile3=$dir$base.d - "$@" -MD - fi - - stat=$? - if test $stat -ne 0; then - rm -f "$tmpdepfile1" "$tmpdepfile2" "$tmpdepfile3" - exit $stat - fi - - for tmpdepfile in "$tmpdepfile1" "$tmpdepfile2" "$tmpdepfile3" - do - test -f "$tmpdepfile" && break - done - # Same post-processing that is required for AIX mode. - aix_post_process_depfile - ;; - -msvc7) - if test "$libtool" = yes; then - showIncludes=-Wc,-showIncludes - else - showIncludes=-showIncludes - fi - "$@" $showIncludes > "$tmpdepfile" - stat=$? - grep -v '^Note: including file: ' "$tmpdepfile" - if test $stat -ne 0; then - rm -f "$tmpdepfile" - exit $stat - fi - rm -f "$depfile" - echo "$object : \\" > "$depfile" - # The first sed program below extracts the file names and escapes - # backslashes for cygpath. The second sed program outputs the file - # name when reading, but also accumulates all include files in the - # hold buffer in order to output them again at the end. This only - # works with sed implementations that can handle large buffers. - sed < "$tmpdepfile" -n ' -/^Note: including file: *\(.*\)/ { - s//\1/ - s/\\/\\\\/g - p -}' | $cygpath_u | sort -u | sed -n ' -s/ /\\ /g -s/\(.*\)/'"$tab"'\1 \\/p -s/.\(.*\) \\/\1:/ -H -$ { - s/.*/'"$tab"'/ - G - p -}' >> "$depfile" - echo >> "$depfile" # make sure the fragment doesn't end with a backslash - rm -f "$tmpdepfile" - ;; - -msvc7msys) - # This case exists only to let depend.m4 do its work. It works by - # looking at the text of this script. This case will never be run, - # since it is checked for above. - exit 1 - ;; - -#nosideeffect) - # This comment above is used by automake to tell side-effect - # dependency tracking mechanisms from slower ones. - -dashmstdout) - # Important note: in order to support this mode, a compiler *must* - # always write the preprocessed file to stdout, regardless of -o. - "$@" || exit $? - - # Remove the call to Libtool. - if test "$libtool" = yes; then - while test "X$1" != 'X--mode=compile'; do - shift - done - shift - fi - - # Remove '-o $object'. - IFS=" " - for arg - do - case $arg in - -o) - shift - ;; - $object) - shift - ;; - *) - set fnord "$@" "$arg" - shift # fnord - shift # $arg - ;; - esac - done - - test -z "$dashmflag" && dashmflag=-M - # Require at least two characters before searching for ':' - # in the target name. This is to cope with DOS-style filenames: - # a dependency such as 'c:/foo/bar' could be seen as target 'c' otherwise. - "$@" $dashmflag | - sed "s|^[$tab ]*[^:$tab ][^:][^:]*:[$tab ]*|$object: |" > "$tmpdepfile" - rm -f "$depfile" - cat < "$tmpdepfile" > "$depfile" - # Some versions of the HPUX 10.20 sed can't process this sed invocation - # correctly. Breaking it into two sed invocations is a workaround. - tr ' ' "$nl" < "$tmpdepfile" \ - | sed -e 's/^\\$//' -e '/^$/d' -e '/:$/d' \ - | sed -e 's/$/ :/' >> "$depfile" - rm -f "$tmpdepfile" - ;; - -dashXmstdout) - # This case only exists to satisfy depend.m4. It is never actually - # run, as this mode is specially recognized in the preamble. - exit 1 - ;; - -makedepend) - "$@" || exit $? - # Remove any Libtool call - if test "$libtool" = yes; then - while test "X$1" != 'X--mode=compile'; do - shift - done - shift - fi - # X makedepend - shift - cleared=no eat=no - for arg - do - case $cleared in - no) - set ""; shift - cleared=yes ;; - esac - if test $eat = yes; then - eat=no - continue - fi - case "$arg" in - -D*|-I*) - set fnord "$@" "$arg"; shift ;; - # Strip any option that makedepend may not understand. Remove - # the object too, otherwise makedepend will parse it as a source file. - -arch) - eat=yes ;; - -*|$object) - ;; - *) - set fnord "$@" "$arg"; shift ;; - esac - done - obj_suffix=`echo "$object" | sed 's/^.*\././'` - touch "$tmpdepfile" - ${MAKEDEPEND-makedepend} -o"$obj_suffix" -f"$tmpdepfile" "$@" - rm -f "$depfile" - # makedepend may prepend the VPATH from the source file name to the object. - # No need to regex-escape $object, excess matching of '.' is harmless. - sed "s|^.*\($object *:\)|\1|" "$tmpdepfile" > "$depfile" - # Some versions of the HPUX 10.20 sed can't process the last invocation - # correctly. Breaking it into two sed invocations is a workaround. - sed '1,2d' "$tmpdepfile" \ - | tr ' ' "$nl" \ - | sed -e 's/^\\$//' -e '/^$/d' -e '/:$/d' \ - | sed -e 's/$/ :/' >> "$depfile" - rm -f "$tmpdepfile" "$tmpdepfile".bak - ;; - -cpp) - # Important note: in order to support this mode, a compiler *must* - # always write the preprocessed file to stdout. - "$@" || exit $? - - # Remove the call to Libtool. - if test "$libtool" = yes; then - while test "X$1" != 'X--mode=compile'; do - shift - done - shift - fi - - # Remove '-o $object'. - IFS=" " - for arg - do - case $arg in - -o) - shift - ;; - $object) - shift - ;; - *) - set fnord "$@" "$arg" - shift # fnord - shift # $arg - ;; - esac - done - - "$@" -E \ - | sed -n -e '/^# [0-9][0-9]* "\([^"]*\)".*/ s:: \1 \\:p' \ - -e '/^#line [0-9][0-9]* "\([^"]*\)".*/ s:: \1 \\:p' \ - | sed '$ s: \\$::' > "$tmpdepfile" - rm -f "$depfile" - echo "$object : \\" > "$depfile" - cat < "$tmpdepfile" >> "$depfile" - sed < "$tmpdepfile" '/^$/d;s/^ //;s/ \\$//;s/$/ :/' >> "$depfile" - rm -f "$tmpdepfile" - ;; - -msvisualcpp) - # Important note: in order to support this mode, a compiler *must* - # always write the preprocessed file to stdout. - "$@" || exit $? - - # Remove the call to Libtool. - if test "$libtool" = yes; then - while test "X$1" != 'X--mode=compile'; do - shift - done - shift - fi - - IFS=" " - for arg - do - case "$arg" in - -o) - shift - ;; - $object) - shift - ;; - "-Gm"|"/Gm"|"-Gi"|"/Gi"|"-ZI"|"/ZI") - set fnord "$@" - shift - shift - ;; - *) - set fnord "$@" "$arg" - shift - shift - ;; - esac - done - "$@" -E 2>/dev/null | - sed -n '/^#line [0-9][0-9]* "\([^"]*\)"/ s::\1:p' | $cygpath_u | sort -u > "$tmpdepfile" - rm -f "$depfile" - echo "$object : \\" > "$depfile" - sed < "$tmpdepfile" -n -e 's% %\\ %g' -e '/^\(.*\)$/ s::'"$tab"'\1 \\:p' >> "$depfile" - echo "$tab" >> "$depfile" - sed < "$tmpdepfile" -n -e 's% %\\ %g' -e '/^\(.*\)$/ s::\1\::p' >> "$depfile" - rm -f "$tmpdepfile" - ;; - -msvcmsys) - # This case exists only to let depend.m4 do its work. It works by - # looking at the text of this script. This case will never be run, - # since it is checked for above. - exit 1 - ;; - -none) - exec "$@" - ;; - -*) - echo "Unknown depmode $depmode" 1>&2 - exit 1 - ;; -esac - -exit 0 - -# Local Variables: -# mode: shell-script -# sh-indentation: 2 -# eval: (add-hook 'write-file-hooks 'time-stamp) -# time-stamp-start: "scriptversion=" -# time-stamp-format: "%:y-%02m-%02d.%02H" -# time-stamp-time-zone: "UTC" -# time-stamp-end: "; # UTC" -# End: diff --git a/gazelle.sql b/gazelle.sql new file mode 100644 index 0000000..55f2321 --- /dev/null +++ b/gazelle.sql @@ -0,0 +1,176 @@ +SET FOREIGN_KEY_CHECKS = 0; + +CREATE DATABASE gazelle CHARACTER SET utf8 COLLATE utf8_swedish_ci; + +USE gazelle; + +CREATE TABLE `torrents` ( + `ID` int(10) NOT NULL AUTO_INCREMENT, + `GroupID` int(10) NOT NULL, + `UserID` int(10) DEFAULT NULL, + `Media` varchar(20) DEFAULT NULL, + `Format` varchar(10) DEFAULT NULL, + `Encoding` varchar(15) DEFAULT NULL, + `Remastered` enum('0','1') NOT NULL DEFAULT '0', + `RemasterYear` int(4) DEFAULT NULL, + `RemasterTitle` varchar(80) NOT NULL DEFAULT '', + `RemasterCatalogueNumber` varchar(80) NOT NULL DEFAULT '', + `RemasterRecordLabel` varchar(80) NOT NULL DEFAULT '', + `Scene` enum('0','1') NOT NULL DEFAULT '0', + `HasLog` enum('0','1') NOT NULL DEFAULT '0', + `HasCue` enum('0','1') NOT NULL DEFAULT '0', + `HasLogDB` enum('0','1') NOT NULL DEFAULT '0', + `LogScore` int(6) NOT NULL DEFAULT '0', + `LogChecksum` enum('0','1') NOT NULL DEFAULT '1', + `info_hash` blob NOT NULL, + `FileCount` int(6) NOT NULL, + `FileList` mediumtext NOT NULL, + `FilePath` varchar(255) NOT NULL DEFAULT '', + `Size` bigint(12) NOT NULL, + `Leechers` int(6) NOT NULL DEFAULT '0', + `Seeders` int(6) NOT NULL DEFAULT '0', + `last_action` datetime NOT NULL DEFAULT '1000-01-01 00:00:00', + `FreeTorrent` enum('0','1','2') NOT NULL DEFAULT '0', + `FreeLeechType` enum('0','1','2','3','4','5','6','7') NOT NULL DEFAULT '0', + `Time` datetime NOT NULL DEFAULT '1000-01-01 00:00:00', + `Description` text, + `Snatched` int(10) unsigned NOT NULL DEFAULT '0', + `balance` bigint(20) NOT NULL DEFAULT '0', + `LastReseedRequest` datetime NOT NULL DEFAULT '1000-01-01 00:00:00', + `TranscodedFrom` int(10) NOT NULL DEFAULT '0', + PRIMARY KEY (`ID`), + UNIQUE KEY `InfoHash` (`info_hash`(40)), + KEY `GroupID` (`GroupID`), + KEY `UserID` (`UserID`), + KEY `Media` (`Media`), + KEY `Format` (`Format`), + KEY `Encoding` (`Encoding`), + KEY `Year` (`RemasterYear`), + KEY `FileCount` (`FileCount`), + KEY `Size` (`Size`), + KEY `Seeders` (`Seeders`), + KEY `Leechers` (`Leechers`), + KEY `Snatched` (`Snatched`), + KEY `last_action` (`last_action`), + KEY `Time` (`Time`), + KEY `FreeTorrent` (`FreeTorrent`) +) ENGINE=InnoDB CHARSET utf8; + +CREATE TABLE `users_freeleeches` ( + `UserID` int(10) NOT NULL, + `TorrentID` int(10) NOT NULL, + `Time` datetime NOT NULL, + `Expired` tinyint(1) NOT NULL DEFAULT '0', + `Downloaded` bigint(20) NOT NULL DEFAULT '0', + `Uses` int(10) NOT NULL DEFAULT '1', + PRIMARY KEY (`UserID`,`TorrentID`), + KEY `Time` (`Time`), + KEY `Expired_Time` (`Expired`,`Time`) +) ENGINE=InnoDB CHARSET utf8; + +CREATE TABLE `users_geodistribution` ( + `Code` varchar(2) NOT NULL, + `Users` int(10) NOT NULL +) ENGINE=InnoDB CHARSET utf8; + +CREATE TABLE `users_history_emails` ( + `UserID` int(10) NOT NULL, + `Email` varchar(255) DEFAULT NULL, + `Time` datetime DEFAULT NULL, + `IP` varchar(15) DEFAULT NULL, + KEY `UserID` (`UserID`) +) ENGINE=InnoDB CHARSET utf8; + +CREATE TABLE `users_main` ( + `ID` int(10) unsigned NOT NULL AUTO_INCREMENT, + `Username` varchar(20) NOT NULL, + `Email` varchar(255) NOT NULL, + `PassHash` varchar(60) NOT NULL, + `Secret` char(32) NOT NULL, + `IRCKey` char(32) DEFAULT NULL, + `LastLogin` datetime NOT NULL DEFAULT '1000-01-01 00:00:00', + `LastAccess` datetime NOT NULL DEFAULT '1000-01-01 00:00:00', + `IP` varchar(15) NOT NULL DEFAULT '0.0.0.0', + `Class` tinyint(2) NOT NULL DEFAULT '5', + `Uploaded` bigint(20) unsigned NOT NULL DEFAULT '0', + `Downloaded` bigint(20) unsigned NOT NULL DEFAULT '0', + `BonusPoints` float(20, 5) NOT NULL DEFAULT '0', + `Title` text NOT NULL, + `Enabled` enum('0','1','2') NOT NULL DEFAULT '0', + `Paranoia` text, + `Visible` enum('1','0') NOT NULL DEFAULT '1', + `Invites` int(10) unsigned NOT NULL DEFAULT '0', + `PermissionID` int(10) unsigned NOT NULL, + `CustomPermissions` text, + `can_leech` tinyint(4) NOT NULL DEFAULT '1', + `torrent_pass` char(32) NOT NULL, + `RequiredRatio` double(10,8) NOT NULL DEFAULT '0.00000000', + `RequiredRatioWork` double(10,8) NOT NULL DEFAULT '0.00000000', + `ipcc` varchar(2) NOT NULL DEFAULT '', + `FLTokens` int(10) NOT NULL DEFAULT '0', + `FLT_Given` int(10) NOT NULL DEFAULT '0', + `Invites_Given` int(10) NOT NULL DEFAULT '0', + `2FA_Key` VARCHAR(16), + `Recovery` text, + PRIMARY KEY (`ID`), + UNIQUE KEY `Username` (`Username`), + KEY `Email` (`Email`), + KEY `PassHash` (`PassHash`), + KEY `LastAccess` (`LastAccess`), + KEY `IP` (`IP`), + KEY `Class` (`Class`), + KEY `Uploaded` (`Uploaded`), + KEY `Downloaded` (`Downloaded`), + KEY `Enabled` (`Enabled`), + KEY `Invites` (`Invites`), + KEY `torrent_pass` (`torrent_pass`), + KEY `RequiredRatio` (`RequiredRatio`), + KEY `cc_index` (`ipcc`), + KEY `PermissionID` (`PermissionID`) +) ENGINE=InnoDB CHARSET utf8; + +CREATE TABLE `xbt_client_whitelist` ( + `id` int(10) unsigned NOT NULL AUTO_INCREMENT, + `peer_id` varchar(20) DEFAULT NULL, + `vstring` varchar(200) DEFAULT '', + PRIMARY KEY (`id`), + UNIQUE KEY `peer_id` (`peer_id`) +) ENGINE=InnoDB CHARSET utf8; + +CREATE TABLE `xbt_files_users` ( + `uid` int(11) NOT NULL, + `active` tinyint(1) NOT NULL DEFAULT '1', + `announced` int(11) NOT NULL DEFAULT '0', + `completed` tinyint(1) NOT NULL DEFAULT '0', + `downloaded` bigint(20) NOT NULL DEFAULT '0', + `remaining` bigint(20) NOT NULL DEFAULT '0', + `uploaded` bigint(20) NOT NULL DEFAULT '0', + `upspeed` int(10) unsigned NOT NULL DEFAULT '0', + `downspeed` int(10) unsigned NOT NULL DEFAULT '0', + `corrupt` bigint(20) NOT NULL DEFAULT '0', + `timespent` int(10) unsigned NOT NULL DEFAULT '0', + `useragent` varchar(51) NOT NULL DEFAULT '', + `connectable` tinyint(4) NOT NULL DEFAULT '1', + `peer_id` binary(20) NOT NULL DEFAULT '\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0', + `fid` int(11) NOT NULL, + `mtime` int(11) NOT NULL DEFAULT '0', + `ip` varchar(15) NOT NULL DEFAULT '', + PRIMARY KEY (`peer_id`,`fid`,`uid`), + KEY `remaining_idx` (`remaining`), + KEY `fid_idx` (`fid`), + KEY `mtime_idx` (`mtime`), + KEY `uid_active` (`uid`,`active`) +) ENGINE=InnoDB CHARSET utf8; + +CREATE TABLE `xbt_snatched` ( + `uid` int(11) NOT NULL DEFAULT '0', + `tstamp` int(11) NOT NULL, + `fid` int(11) NOT NULL, + `IP` varchar(15) NOT NULL, + `seedtime` int(11) NOT NULL DEFAULT '0', + KEY `fid` (`fid`), + KEY `tstamp` (`tstamp`), + KEY `uid_tstamp` (`uid`,`tstamp`) +) ENGINE=InnoDB CHARSET utf8; + +SET FOREIGN_KEY_CHECKS = 1; \ No newline at end of file diff --git a/install-sh b/install-sh deleted file mode 100755 index 377bb86..0000000 --- a/install-sh +++ /dev/null @@ -1,527 +0,0 @@ -#!/bin/sh -# install - install a program, script, or datafile - -scriptversion=2011-11-20.07; # UTC - -# This originates from X11R5 (mit/util/scripts/install.sh), which was -# later released in X11R6 (xc/config/util/install.sh) with the -# following copyright and license. -# -# Copyright (C) 1994 X Consortium -# -# Permission is hereby granted, free of charge, to any person obtaining a copy -# of this software and associated documentation files (the "Software"), to -# deal in the Software without restriction, including without limitation the -# rights to use, copy, modify, merge, publish, distribute, sublicense, and/or -# sell copies of the Software, and to permit persons to whom the Software is -# furnished to do so, subject to the following conditions: -# -# The above copyright notice and this permission notice shall be included in -# all copies or substantial portions of the Software. -# -# THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR -# IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, -# FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE -# X CONSORTIUM BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN -# AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNEC- -# TION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE. -# -# Except as contained in this notice, the name of the X Consortium shall not -# be used in advertising or otherwise to promote the sale, use or other deal- -# ings in this Software without prior written authorization from the X Consor- -# tium. -# -# -# FSF changes to this file are in the public domain. -# -# Calling this script install-sh is preferred over install.sh, to prevent -# 'make' implicit rules from creating a file called install from it -# when there is no Makefile. -# -# This script is compatible with the BSD install script, but was written -# from scratch. - -nl=' -' -IFS=" "" $nl" - -# set DOITPROG to echo to test this script - -# Don't use :- since 4.3BSD and earlier shells don't like it. -doit=${DOITPROG-} -if test -z "$doit"; then - doit_exec=exec -else - doit_exec=$doit -fi - -# Put in absolute file names if you don't have them in your path; -# or use environment vars. - -chgrpprog=${CHGRPPROG-chgrp} -chmodprog=${CHMODPROG-chmod} -chownprog=${CHOWNPROG-chown} -cmpprog=${CMPPROG-cmp} -cpprog=${CPPROG-cp} -mkdirprog=${MKDIRPROG-mkdir} -mvprog=${MVPROG-mv} -rmprog=${RMPROG-rm} -stripprog=${STRIPPROG-strip} - -posix_glob='?' -initialize_posix_glob=' - test "$posix_glob" != "?" || { - if (set -f) 2>/dev/null; then - posix_glob= - else - posix_glob=: - fi - } -' - -posix_mkdir= - -# Desired mode of installed file. -mode=0755 - -chgrpcmd= -chmodcmd=$chmodprog -chowncmd= -mvcmd=$mvprog -rmcmd="$rmprog -f" -stripcmd= - -src= -dst= -dir_arg= -dst_arg= - -copy_on_change=false -no_target_directory= - -usage="\ -Usage: $0 [OPTION]... [-T] SRCFILE DSTFILE - or: $0 [OPTION]... SRCFILES... DIRECTORY - or: $0 [OPTION]... -t DIRECTORY SRCFILES... - or: $0 [OPTION]... -d DIRECTORIES... - -In the 1st form, copy SRCFILE to DSTFILE. -In the 2nd and 3rd, copy all SRCFILES to DIRECTORY. -In the 4th, create DIRECTORIES. - -Options: - --help display this help and exit. - --version display version info and exit. - - -c (ignored) - -C install only if different (preserve the last data modification time) - -d create directories instead of installing files. - -g GROUP $chgrpprog installed files to GROUP. - -m MODE $chmodprog installed files to MODE. - -o USER $chownprog installed files to USER. - -s $stripprog installed files. - -t DIRECTORY install into DIRECTORY. - -T report an error if DSTFILE is a directory. - -Environment variables override the default commands: - CHGRPPROG CHMODPROG CHOWNPROG CMPPROG CPPROG MKDIRPROG MVPROG - RMPROG STRIPPROG -" - -while test $# -ne 0; do - case $1 in - -c) ;; - - -C) copy_on_change=true;; - - -d) dir_arg=true;; - - -g) chgrpcmd="$chgrpprog $2" - shift;; - - --help) echo "$usage"; exit $?;; - - -m) mode=$2 - case $mode in - *' '* | *' '* | *' -'* | *'*'* | *'?'* | *'['*) - echo "$0: invalid mode: $mode" >&2 - exit 1;; - esac - shift;; - - -o) chowncmd="$chownprog $2" - shift;; - - -s) stripcmd=$stripprog;; - - -t) dst_arg=$2 - # Protect names problematic for 'test' and other utilities. - case $dst_arg in - -* | [=\(\)!]) dst_arg=./$dst_arg;; - esac - shift;; - - -T) no_target_directory=true;; - - --version) echo "$0 $scriptversion"; exit $?;; - - --) shift - break;; - - -*) echo "$0: invalid option: $1" >&2 - exit 1;; - - *) break;; - esac - shift -done - -if test $# -ne 0 && test -z "$dir_arg$dst_arg"; then - # When -d is used, all remaining arguments are directories to create. - # When -t is used, the destination is already specified. - # Otherwise, the last argument is the destination. Remove it from $@. - for arg - do - if test -n "$dst_arg"; then - # $@ is not empty: it contains at least $arg. - set fnord "$@" "$dst_arg" - shift # fnord - fi - shift # arg - dst_arg=$arg - # Protect names problematic for 'test' and other utilities. - case $dst_arg in - -* | [=\(\)!]) dst_arg=./$dst_arg;; - esac - done -fi - -if test $# -eq 0; then - if test -z "$dir_arg"; then - echo "$0: no input file specified." >&2 - exit 1 - fi - # It's OK to call 'install-sh -d' without argument. - # This can happen when creating conditional directories. - exit 0 -fi - -if test -z "$dir_arg"; then - do_exit='(exit $ret); exit $ret' - trap "ret=129; $do_exit" 1 - trap "ret=130; $do_exit" 2 - trap "ret=141; $do_exit" 13 - trap "ret=143; $do_exit" 15 - - # Set umask so as not to create temps with too-generous modes. - # However, 'strip' requires both read and write access to temps. - case $mode in - # Optimize common cases. - *644) cp_umask=133;; - *755) cp_umask=22;; - - *[0-7]) - if test -z "$stripcmd"; then - u_plus_rw= - else - u_plus_rw='% 200' - fi - cp_umask=`expr '(' 777 - $mode % 1000 ')' $u_plus_rw`;; - *) - if test -z "$stripcmd"; then - u_plus_rw= - else - u_plus_rw=,u+rw - fi - cp_umask=$mode$u_plus_rw;; - esac -fi - -for src -do - # Protect names problematic for 'test' and other utilities. - case $src in - -* | [=\(\)!]) src=./$src;; - esac - - if test -n "$dir_arg"; then - dst=$src - dstdir=$dst - test -d "$dstdir" - dstdir_status=$? - else - - # Waiting for this to be detected by the "$cpprog $src $dsttmp" command - # might cause directories to be created, which would be especially bad - # if $src (and thus $dsttmp) contains '*'. - if test ! -f "$src" && test ! -d "$src"; then - echo "$0: $src does not exist." >&2 - exit 1 - fi - - if test -z "$dst_arg"; then - echo "$0: no destination specified." >&2 - exit 1 - fi - dst=$dst_arg - - # If destination is a directory, append the input filename; won't work - # if double slashes aren't ignored. - if test -d "$dst"; then - if test -n "$no_target_directory"; then - echo "$0: $dst_arg: Is a directory" >&2 - exit 1 - fi - dstdir=$dst - dst=$dstdir/`basename "$src"` - dstdir_status=0 - else - # Prefer dirname, but fall back on a substitute if dirname fails. - dstdir=` - (dirname "$dst") 2>/dev/null || - expr X"$dst" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ - X"$dst" : 'X\(//\)[^/]' \| \ - X"$dst" : 'X\(//\)$' \| \ - X"$dst" : 'X\(/\)' \| . 2>/dev/null || - echo X"$dst" | - sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ - s//\1/ - q - } - /^X\(\/\/\)[^/].*/{ - s//\1/ - q - } - /^X\(\/\/\)$/{ - s//\1/ - q - } - /^X\(\/\).*/{ - s//\1/ - q - } - s/.*/./; q' - ` - - test -d "$dstdir" - dstdir_status=$? - fi - fi - - obsolete_mkdir_used=false - - if test $dstdir_status != 0; then - case $posix_mkdir in - '') - # Create intermediate dirs using mode 755 as modified by the umask. - # This is like FreeBSD 'install' as of 1997-10-28. - umask=`umask` - case $stripcmd.$umask in - # Optimize common cases. - *[2367][2367]) mkdir_umask=$umask;; - .*0[02][02] | .[02][02] | .[02]) mkdir_umask=22;; - - *[0-7]) - mkdir_umask=`expr $umask + 22 \ - - $umask % 100 % 40 + $umask % 20 \ - - $umask % 10 % 4 + $umask % 2 - `;; - *) mkdir_umask=$umask,go-w;; - esac - - # With -d, create the new directory with the user-specified mode. - # Otherwise, rely on $mkdir_umask. - if test -n "$dir_arg"; then - mkdir_mode=-m$mode - else - mkdir_mode= - fi - - posix_mkdir=false - case $umask in - *[123567][0-7][0-7]) - # POSIX mkdir -p sets u+wx bits regardless of umask, which - # is incompatible with FreeBSD 'install' when (umask & 300) != 0. - ;; - *) - tmpdir=${TMPDIR-/tmp}/ins$RANDOM-$$ - trap 'ret=$?; rmdir "$tmpdir/d" "$tmpdir" 2>/dev/null; exit $ret' 0 - - if (umask $mkdir_umask && - exec $mkdirprog $mkdir_mode -p -- "$tmpdir/d") >/dev/null 2>&1 - then - if test -z "$dir_arg" || { - # Check for POSIX incompatibilities with -m. - # HP-UX 11.23 and IRIX 6.5 mkdir -m -p sets group- or - # other-writable bit of parent directory when it shouldn't. - # FreeBSD 6.1 mkdir -m -p sets mode of existing directory. - ls_ld_tmpdir=`ls -ld "$tmpdir"` - case $ls_ld_tmpdir in - d????-?r-*) different_mode=700;; - d????-?--*) different_mode=755;; - *) false;; - esac && - $mkdirprog -m$different_mode -p -- "$tmpdir" && { - ls_ld_tmpdir_1=`ls -ld "$tmpdir"` - test "$ls_ld_tmpdir" = "$ls_ld_tmpdir_1" - } - } - then posix_mkdir=: - fi - rmdir "$tmpdir/d" "$tmpdir" - else - # Remove any dirs left behind by ancient mkdir implementations. - rmdir ./$mkdir_mode ./-p ./-- 2>/dev/null - fi - trap '' 0;; - esac;; - esac - - if - $posix_mkdir && ( - umask $mkdir_umask && - $doit_exec $mkdirprog $mkdir_mode -p -- "$dstdir" - ) - then : - else - - # The umask is ridiculous, or mkdir does not conform to POSIX, - # or it failed possibly due to a race condition. Create the - # directory the slow way, step by step, checking for races as we go. - - case $dstdir in - /*) prefix='/';; - [-=\(\)!]*) prefix='./';; - *) prefix='';; - esac - - eval "$initialize_posix_glob" - - oIFS=$IFS - IFS=/ - $posix_glob set -f - set fnord $dstdir - shift - $posix_glob set +f - IFS=$oIFS - - prefixes= - - for d - do - test X"$d" = X && continue - - prefix=$prefix$d - if test -d "$prefix"; then - prefixes= - else - if $posix_mkdir; then - (umask=$mkdir_umask && - $doit_exec $mkdirprog $mkdir_mode -p -- "$dstdir") && break - # Don't fail if two instances are running concurrently. - test -d "$prefix" || exit 1 - else - case $prefix in - *\'*) qprefix=`echo "$prefix" | sed "s/'/'\\\\\\\\''/g"`;; - *) qprefix=$prefix;; - esac - prefixes="$prefixes '$qprefix'" - fi - fi - prefix=$prefix/ - done - - if test -n "$prefixes"; then - # Don't fail if two instances are running concurrently. - (umask $mkdir_umask && - eval "\$doit_exec \$mkdirprog $prefixes") || - test -d "$dstdir" || exit 1 - obsolete_mkdir_used=true - fi - fi - fi - - if test -n "$dir_arg"; then - { test -z "$chowncmd" || $doit $chowncmd "$dst"; } && - { test -z "$chgrpcmd" || $doit $chgrpcmd "$dst"; } && - { test "$obsolete_mkdir_used$chowncmd$chgrpcmd" = false || - test -z "$chmodcmd" || $doit $chmodcmd $mode "$dst"; } || exit 1 - else - - # Make a couple of temp file names in the proper directory. - dsttmp=$dstdir/_inst.$$_ - rmtmp=$dstdir/_rm.$$_ - - # Trap to clean up those temp files at exit. - trap 'ret=$?; rm -f "$dsttmp" "$rmtmp" && exit $ret' 0 - - # Copy the file name to the temp name. - (umask $cp_umask && $doit_exec $cpprog "$src" "$dsttmp") && - - # and set any options; do chmod last to preserve setuid bits. - # - # If any of these fail, we abort the whole thing. If we want to - # ignore errors from any of these, just make sure not to ignore - # errors from the above "$doit $cpprog $src $dsttmp" command. - # - { test -z "$chowncmd" || $doit $chowncmd "$dsttmp"; } && - { test -z "$chgrpcmd" || $doit $chgrpcmd "$dsttmp"; } && - { test -z "$stripcmd" || $doit $stripcmd "$dsttmp"; } && - { test -z "$chmodcmd" || $doit $chmodcmd $mode "$dsttmp"; } && - - # If -C, don't bother to copy if it wouldn't change the file. - if $copy_on_change && - old=`LC_ALL=C ls -dlL "$dst" 2>/dev/null` && - new=`LC_ALL=C ls -dlL "$dsttmp" 2>/dev/null` && - - eval "$initialize_posix_glob" && - $posix_glob set -f && - set X $old && old=:$2:$4:$5:$6 && - set X $new && new=:$2:$4:$5:$6 && - $posix_glob set +f && - - test "$old" = "$new" && - $cmpprog "$dst" "$dsttmp" >/dev/null 2>&1 - then - rm -f "$dsttmp" - else - # Rename the file to the real destination. - $doit $mvcmd -f "$dsttmp" "$dst" 2>/dev/null || - - # The rename failed, perhaps because mv can't rename something else - # to itself, or perhaps because mv is so ancient that it does not - # support -f. - { - # Now remove or move aside any old file at destination location. - # We try this two ways since rm can't unlink itself on some - # systems and the destination file might be busy for other - # reasons. In this case, the final cleanup might fail but the new - # file should still install successfully. - { - test ! -f "$dst" || - $doit $rmcmd -f "$dst" 2>/dev/null || - { $doit $mvcmd -f "$dst" "$rmtmp" 2>/dev/null && - { $doit $rmcmd -f "$rmtmp" 2>/dev/null; :; } - } || - { echo "$0: cannot unlink or rename $dst" >&2 - (exit 1); exit 1 - } - } && - - # Now rename the file to the real destination. - $doit $mvcmd "$dsttmp" "$dst" - } - fi || exit 1 - - trap '' 0 - fi -done - -# Local variables: -# eval: (add-hook 'write-file-hooks 'time-stamp) -# time-stamp-start: "scriptversion=" -# time-stamp-format: "%:y-%02m-%02d.%02H" -# time-stamp-time-zone: "UTC" -# time-stamp-end: "; # UTC" -# End: diff --git a/src/spdlog/async.h b/libs/spdlog/async.h similarity index 100% rename from src/spdlog/async.h rename to libs/spdlog/async.h diff --git a/src/spdlog/async_logger.h b/libs/spdlog/async_logger.h similarity index 98% rename from src/spdlog/async_logger.h rename to libs/spdlog/async_logger.h index a7ecb78..66e7f02 100644 --- a/src/spdlog/async_logger.h +++ b/libs/spdlog/async_logger.h @@ -70,4 +70,4 @@ private: }; } // namespace spdlog -#include "details/async_logger_impl.h" +#include "spdlog/details/async_logger_impl.h" diff --git a/src/spdlog/common.h b/libs/spdlog/common.h similarity index 100% rename from src/spdlog/common.h rename to libs/spdlog/common.h diff --git a/src/spdlog/details/async_logger_impl.h b/libs/spdlog/details/async_logger_impl.h similarity index 100% rename from src/spdlog/details/async_logger_impl.h rename to libs/spdlog/details/async_logger_impl.h diff --git a/src/spdlog/details/circular_q.h b/libs/spdlog/details/circular_q.h similarity index 100% rename from src/spdlog/details/circular_q.h rename to libs/spdlog/details/circular_q.h diff --git a/src/spdlog/details/console_globals.h b/libs/spdlog/details/console_globals.h similarity index 100% rename from src/spdlog/details/console_globals.h rename to libs/spdlog/details/console_globals.h diff --git a/src/spdlog/details/file_helper.h b/libs/spdlog/details/file_helper.h similarity index 100% rename from src/spdlog/details/file_helper.h rename to libs/spdlog/details/file_helper.h diff --git a/src/spdlog/details/fmt_helper.h b/libs/spdlog/details/fmt_helper.h similarity index 100% rename from src/spdlog/details/fmt_helper.h rename to libs/spdlog/details/fmt_helper.h diff --git a/src/spdlog/details/log_msg.h b/libs/spdlog/details/log_msg.h similarity index 100% rename from src/spdlog/details/log_msg.h rename to libs/spdlog/details/log_msg.h diff --git a/src/spdlog/details/logger_impl.h b/libs/spdlog/details/logger_impl.h similarity index 100% rename from src/spdlog/details/logger_impl.h rename to libs/spdlog/details/logger_impl.h diff --git a/src/spdlog/details/mpmc_blocking_q.h b/libs/spdlog/details/mpmc_blocking_q.h similarity index 100% rename from src/spdlog/details/mpmc_blocking_q.h rename to libs/spdlog/details/mpmc_blocking_q.h diff --git a/src/spdlog/details/null_mutex.h b/libs/spdlog/details/null_mutex.h similarity index 100% rename from src/spdlog/details/null_mutex.h rename to libs/spdlog/details/null_mutex.h diff --git a/src/spdlog/details/os.h b/libs/spdlog/details/os.h similarity index 99% rename from src/spdlog/details/os.h rename to libs/spdlog/details/os.h index aa802ab..26b8a76 100644 --- a/src/spdlog/details/os.h +++ b/libs/spdlog/details/os.h @@ -4,7 +4,7 @@ // #pragma once -#include "../common.h" +#include "spdlog/common.h" #include #include diff --git a/src/spdlog/details/pattern_formatter.h b/libs/spdlog/details/pattern_formatter.h similarity index 100% rename from src/spdlog/details/pattern_formatter.h rename to libs/spdlog/details/pattern_formatter.h diff --git a/src/spdlog/details/periodic_worker.h b/libs/spdlog/details/periodic_worker.h similarity index 100% rename from src/spdlog/details/periodic_worker.h rename to libs/spdlog/details/periodic_worker.h diff --git a/src/spdlog/details/registry.h b/libs/spdlog/details/registry.h similarity index 100% rename from src/spdlog/details/registry.h rename to libs/spdlog/details/registry.h diff --git a/src/spdlog/details/thread_pool.h b/libs/spdlog/details/thread_pool.h similarity index 100% rename from src/spdlog/details/thread_pool.h rename to libs/spdlog/details/thread_pool.h diff --git a/src/spdlog/fmt/bin_to_hex.h b/libs/spdlog/fmt/bin_to_hex.h similarity index 100% rename from src/spdlog/fmt/bin_to_hex.h rename to libs/spdlog/fmt/bin_to_hex.h diff --git a/src/spdlog/fmt/bundled/LICENSE.rst b/libs/spdlog/fmt/bundled/LICENSE.rst similarity index 100% rename from src/spdlog/fmt/bundled/LICENSE.rst rename to libs/spdlog/fmt/bundled/LICENSE.rst diff --git a/src/spdlog/fmt/bundled/colors.h b/libs/spdlog/fmt/bundled/colors.h similarity index 100% rename from src/spdlog/fmt/bundled/colors.h rename to libs/spdlog/fmt/bundled/colors.h diff --git a/src/spdlog/fmt/bundled/core.h b/libs/spdlog/fmt/bundled/core.h similarity index 100% rename from src/spdlog/fmt/bundled/core.h rename to libs/spdlog/fmt/bundled/core.h diff --git a/src/spdlog/fmt/bundled/format-inl.h b/libs/spdlog/fmt/bundled/format-inl.h similarity index 100% rename from src/spdlog/fmt/bundled/format-inl.h rename to libs/spdlog/fmt/bundled/format-inl.h diff --git a/src/spdlog/fmt/bundled/format.h b/libs/spdlog/fmt/bundled/format.h similarity index 100% rename from src/spdlog/fmt/bundled/format.h rename to libs/spdlog/fmt/bundled/format.h diff --git a/src/spdlog/fmt/bundled/ostream.h b/libs/spdlog/fmt/bundled/ostream.h similarity index 100% rename from src/spdlog/fmt/bundled/ostream.h rename to libs/spdlog/fmt/bundled/ostream.h diff --git a/src/spdlog/fmt/bundled/posix.h b/libs/spdlog/fmt/bundled/posix.h similarity index 100% rename from src/spdlog/fmt/bundled/posix.h rename to libs/spdlog/fmt/bundled/posix.h diff --git a/src/spdlog/fmt/bundled/printf.h b/libs/spdlog/fmt/bundled/printf.h similarity index 100% rename from src/spdlog/fmt/bundled/printf.h rename to libs/spdlog/fmt/bundled/printf.h diff --git a/src/spdlog/fmt/bundled/ranges.h b/libs/spdlog/fmt/bundled/ranges.h similarity index 100% rename from src/spdlog/fmt/bundled/ranges.h rename to libs/spdlog/fmt/bundled/ranges.h diff --git a/src/spdlog/fmt/bundled/time.h b/libs/spdlog/fmt/bundled/time.h similarity index 100% rename from src/spdlog/fmt/bundled/time.h rename to libs/spdlog/fmt/bundled/time.h diff --git a/src/spdlog/fmt/fmt.h b/libs/spdlog/fmt/fmt.h similarity index 86% rename from src/spdlog/fmt/fmt.h rename to libs/spdlog/fmt/fmt.h index 616af0c..806b4a6 100644 --- a/src/spdlog/fmt/fmt.h +++ b/libs/spdlog/fmt/fmt.h @@ -17,8 +17,8 @@ #ifndef FMT_USE_WINDOWS_H #define FMT_USE_WINDOWS_H 0 #endif -#include "bundled/core.h" -#include "bundled/format.h" +#include "spdlog/fmt/bundled/core.h" +#include "spdlog/fmt/bundled/format.h" #else // external fmtlib #include #include diff --git a/src/spdlog/fmt/ostr.h b/libs/spdlog/fmt/ostr.h similarity index 89% rename from src/spdlog/fmt/ostr.h rename to libs/spdlog/fmt/ostr.h index 9902898..0ef88c0 100644 --- a/src/spdlog/fmt/ostr.h +++ b/libs/spdlog/fmt/ostr.h @@ -11,7 +11,7 @@ #ifndef FMT_HEADER_ONLY #define FMT_HEADER_ONLY #endif -#include "bundled/ostream.h" +#include "spdlog/fmt/bundled/ostream.h" #include "fmt.h" #else #include diff --git a/src/spdlog/formatter.h b/libs/spdlog/formatter.h similarity index 93% rename from src/spdlog/formatter.h rename to libs/spdlog/formatter.h index a7ef6b8..0d80a5d 100644 --- a/src/spdlog/formatter.h +++ b/libs/spdlog/formatter.h @@ -5,7 +5,7 @@ #pragma once -#include "fmt/fmt.h" +#include "spdlog/fmt/fmt.h" #include "spdlog/details/log_msg.h" namespace spdlog { diff --git a/src/spdlog/logger.h b/libs/spdlog/logger.h similarity index 99% rename from src/spdlog/logger.h rename to libs/spdlog/logger.h index 1bcf4bc..496aaa2 100644 --- a/src/spdlog/logger.h +++ b/libs/spdlog/logger.h @@ -164,4 +164,4 @@ protected: }; } // namespace spdlog -#include "details/logger_impl.h" +#include "spdlog/details/logger_impl.h" diff --git a/src/spdlog/sinks/android_sink.h b/libs/spdlog/sinks/android_sink.h similarity index 100% rename from src/spdlog/sinks/android_sink.h rename to libs/spdlog/sinks/android_sink.h diff --git a/src/spdlog/sinks/ansicolor_sink.h b/libs/spdlog/sinks/ansicolor_sink.h similarity index 100% rename from src/spdlog/sinks/ansicolor_sink.h rename to libs/spdlog/sinks/ansicolor_sink.h diff --git a/src/spdlog/sinks/base_sink.h b/libs/spdlog/sinks/base_sink.h similarity index 100% rename from src/spdlog/sinks/base_sink.h rename to libs/spdlog/sinks/base_sink.h diff --git a/src/spdlog/sinks/basic_file_sink.h b/libs/spdlog/sinks/basic_file_sink.h similarity index 100% rename from src/spdlog/sinks/basic_file_sink.h rename to libs/spdlog/sinks/basic_file_sink.h diff --git a/src/spdlog/sinks/daily_file_sink.h b/libs/spdlog/sinks/daily_file_sink.h similarity index 100% rename from src/spdlog/sinks/daily_file_sink.h rename to libs/spdlog/sinks/daily_file_sink.h diff --git a/src/spdlog/sinks/dist_sink.h b/libs/spdlog/sinks/dist_sink.h similarity index 100% rename from src/spdlog/sinks/dist_sink.h rename to libs/spdlog/sinks/dist_sink.h diff --git a/src/spdlog/sinks/msvc_sink.h b/libs/spdlog/sinks/msvc_sink.h similarity index 100% rename from src/spdlog/sinks/msvc_sink.h rename to libs/spdlog/sinks/msvc_sink.h diff --git a/src/spdlog/sinks/null_sink.h b/libs/spdlog/sinks/null_sink.h similarity index 100% rename from src/spdlog/sinks/null_sink.h rename to libs/spdlog/sinks/null_sink.h diff --git a/src/spdlog/sinks/ostream_sink.h b/libs/spdlog/sinks/ostream_sink.h similarity index 100% rename from src/spdlog/sinks/ostream_sink.h rename to libs/spdlog/sinks/ostream_sink.h diff --git a/src/spdlog/sinks/rotating_file_sink.h b/libs/spdlog/sinks/rotating_file_sink.h similarity index 100% rename from src/spdlog/sinks/rotating_file_sink.h rename to libs/spdlog/sinks/rotating_file_sink.h diff --git a/src/spdlog/sinks/sink.h b/libs/spdlog/sinks/sink.h similarity index 100% rename from src/spdlog/sinks/sink.h rename to libs/spdlog/sinks/sink.h diff --git a/src/spdlog/sinks/stdout_color_sinks.h b/libs/spdlog/sinks/stdout_color_sinks.h similarity index 100% rename from src/spdlog/sinks/stdout_color_sinks.h rename to libs/spdlog/sinks/stdout_color_sinks.h diff --git a/src/spdlog/sinks/stdout_sinks.h b/libs/spdlog/sinks/stdout_sinks.h similarity index 100% rename from src/spdlog/sinks/stdout_sinks.h rename to libs/spdlog/sinks/stdout_sinks.h diff --git a/src/spdlog/sinks/syslog_sink.h b/libs/spdlog/sinks/syslog_sink.h similarity index 100% rename from src/spdlog/sinks/syslog_sink.h rename to libs/spdlog/sinks/syslog_sink.h diff --git a/src/spdlog/sinks/wincolor_sink.h b/libs/spdlog/sinks/wincolor_sink.h similarity index 100% rename from src/spdlog/sinks/wincolor_sink.h rename to libs/spdlog/sinks/wincolor_sink.h diff --git a/src/spdlog/spdlog.h b/libs/spdlog/spdlog.h similarity index 100% rename from src/spdlog/spdlog.h rename to libs/spdlog/spdlog.h diff --git a/src/spdlog/tweakme.h b/libs/spdlog/tweakme.h similarity index 100% rename from src/spdlog/tweakme.h rename to libs/spdlog/tweakme.h diff --git a/src/spdlog/version.h b/libs/spdlog/version.h similarity index 100% rename from src/spdlog/version.h rename to libs/spdlog/version.h diff --git a/m4/ax_boost_base.m4 b/m4/ax_boost_base.m4 deleted file mode 100644 index 478050f..0000000 --- a/m4/ax_boost_base.m4 +++ /dev/null @@ -1,301 +0,0 @@ -# =========================================================================== -# https://www.gnu.org/software/autoconf-archive/ax_boost_base.html -# =========================================================================== -# -# SYNOPSIS -# -# AX_BOOST_BASE([MINIMUM-VERSION], [ACTION-IF-FOUND], [ACTION-IF-NOT-FOUND]) -# -# DESCRIPTION -# -# Test for the Boost C++ libraries of a particular version (or newer) -# -# If no path to the installed boost library is given the macro searchs -# under /usr, /usr/local, /opt and /opt/local and evaluates the -# $BOOST_ROOT environment variable. Further documentation is available at -# . -# -# This macro calls: -# -# AC_SUBST(BOOST_CPPFLAGS) / AC_SUBST(BOOST_LDFLAGS) -# -# And sets: -# -# HAVE_BOOST -# -# LICENSE -# -# Copyright (c) 2008 Thomas Porschberg -# Copyright (c) 2009 Peter Adolphs -# -# Copying and distribution of this file, with or without modification, are -# permitted in any medium without royalty provided the copyright notice -# and this notice are preserved. This file is offered as-is, without any -# warranty. - -#serial 42 - -# example boost program (need to pass version) -m4_define([_AX_BOOST_BASE_PROGRAM], - [AC_LANG_PROGRAM([[ -#include -]],[[ -(void) ((void)sizeof(char[1 - 2*!!((BOOST_VERSION) < ($1))])); -]])]) - -AC_DEFUN([AX_BOOST_BASE], -[ -AC_ARG_WITH([boost], - [AS_HELP_STRING([--with-boost@<:@=ARG@:>@], - [use Boost library from a standard location (ARG=yes), - from the specified location (ARG=), - or disable it (ARG=no) - @<:@ARG=yes@:>@ ])], - [ - AS_CASE([$withval], - [no],[want_boost="no";_AX_BOOST_BASE_boost_path=""], - [yes],[want_boost="yes";_AX_BOOST_BASE_boost_path=""], - [want_boost="yes";_AX_BOOST_BASE_boost_path="$withval"]) - ], - [want_boost="yes"]) - - -AC_ARG_WITH([boost-libdir], - [AS_HELP_STRING([--with-boost-libdir=LIB_DIR], - [Force given directory for boost libraries. - Note that this will override library path detection, - so use this parameter only if default library detection fails - and you know exactly where your boost libraries are located.])], - [ - AS_IF([test -d "$withval"], - [_AX_BOOST_BASE_boost_lib_path="$withval"], - [AC_MSG_ERROR([--with-boost-libdir expected directory name])]) - ], - [_AX_BOOST_BASE_boost_lib_path=""]) - -BOOST_LDFLAGS="" -BOOST_CPPFLAGS="" -AS_IF([test "x$want_boost" = "xyes"], - [_AX_BOOST_BASE_RUNDETECT([$1],[$2],[$3])]) -AC_SUBST(BOOST_CPPFLAGS) -AC_SUBST(BOOST_LDFLAGS) -]) - - -# convert a version string in $2 to numeric and affect to polymorphic var $1 -AC_DEFUN([_AX_BOOST_BASE_TONUMERICVERSION],[ - AS_IF([test "x$2" = "x"],[_AX_BOOST_BASE_TONUMERICVERSION_req="1.20.0"],[_AX_BOOST_BASE_TONUMERICVERSION_req="$2"]) - _AX_BOOST_BASE_TONUMERICVERSION_req_shorten=`expr $_AX_BOOST_BASE_TONUMERICVERSION_req : '\([[0-9]]*\.[[0-9]]*\)'` - _AX_BOOST_BASE_TONUMERICVERSION_req_major=`expr $_AX_BOOST_BASE_TONUMERICVERSION_req : '\([[0-9]]*\)'` - AS_IF([test "x$_AX_BOOST_BASE_TONUMERICVERSION_req_major" = "x"], - [AC_MSG_ERROR([You should at least specify libboost major version])]) - _AX_BOOST_BASE_TONUMERICVERSION_req_minor=`expr $_AX_BOOST_BASE_TONUMERICVERSION_req : '[[0-9]]*\.\([[0-9]]*\)'` - AS_IF([test "x$_AX_BOOST_BASE_TONUMERICVERSION_req_minor" = "x"], - [_AX_BOOST_BASE_TONUMERICVERSION_req_minor="0"]) - _AX_BOOST_BASE_TONUMERICVERSION_req_sub_minor=`expr $_AX_BOOST_BASE_TONUMERICVERSION_req : '[[0-9]]*\.[[0-9]]*\.\([[0-9]]*\)'` - AS_IF([test "X$_AX_BOOST_BASE_TONUMERICVERSION_req_sub_minor" = "X"], - [_AX_BOOST_BASE_TONUMERICVERSION_req_sub_minor="0"]) - _AX_BOOST_BASE_TONUMERICVERSION_RET=`expr $_AX_BOOST_BASE_TONUMERICVERSION_req_major \* 100000 \+ $_AX_BOOST_BASE_TONUMERICVERSION_req_minor \* 100 \+ $_AX_BOOST_BASE_TONUMERICVERSION_req_sub_minor` - AS_VAR_SET($1,$_AX_BOOST_BASE_TONUMERICVERSION_RET) -]) - -dnl Run the detection of boost should be run only if $want_boost -AC_DEFUN([_AX_BOOST_BASE_RUNDETECT],[ - _AX_BOOST_BASE_TONUMERICVERSION(WANT_BOOST_VERSION,[$1]) - succeeded=no - - - AC_REQUIRE([AC_CANONICAL_HOST]) - dnl On 64-bit systems check for system libraries in both lib64 and lib. - dnl The former is specified by FHS, but e.g. Debian does not adhere to - dnl this (as it rises problems for generic multi-arch support). - dnl The last entry in the list is chosen by default when no libraries - dnl are found, e.g. when only header-only libraries are installed! - AS_CASE([${host_cpu}], - [x86_64],[libsubdirs="lib64 libx32 lib lib64"], - [ppc64|s390x|sparc64|aarch64|ppc64le],[libsubdirs="lib64 lib lib64"], - [libsubdirs="lib"], - ) - - dnl allow for real multi-arch paths e.g. /usr/lib/x86_64-linux-gnu. Give - dnl them priority over the other paths since, if libs are found there, they - dnl are almost assuredly the ones desired. - AS_CASE([${host_cpu}], - [i?86],[multiarch_libsubdir="lib/i386-${host_os}"], - [multiarch_libsubdir="lib/${host_cpu}-${host_os}"] - ) - - dnl first we check the system location for boost libraries - dnl this location ist chosen if boost libraries are installed with the --layout=system option - dnl or if you install boost with RPM - AS_IF([test "x$_AX_BOOST_BASE_boost_path" != "x"],[ - AC_MSG_CHECKING([for boostlib >= $1 ($WANT_BOOST_VERSION) includes in "$_AX_BOOST_BASE_boost_path/include"]) - AS_IF([test -d "$_AX_BOOST_BASE_boost_path/include" && test -r "$_AX_BOOST_BASE_boost_path/include"],[ - AC_MSG_RESULT([yes]) - BOOST_CPPFLAGS="-I$_AX_BOOST_BASE_boost_path/include" - for _AX_BOOST_BASE_boost_path_tmp in $multiarch_libsubdir $libsubdirs; do - AC_MSG_CHECKING([for boostlib >= $1 ($WANT_BOOST_VERSION) lib path in "$_AX_BOOST_BASE_boost_path/$_AX_BOOST_BASE_boost_path_tmp"]) - AS_IF([test -d "$_AX_BOOST_BASE_boost_path/$_AX_BOOST_BASE_boost_path_tmp" && test -r "$_AX_BOOST_BASE_boost_path/$_AX_BOOST_BASE_boost_path_tmp" ],[ - AC_MSG_RESULT([yes]) - BOOST_LDFLAGS="-L$_AX_BOOST_BASE_boost_path/$_AX_BOOST_BASE_boost_path_tmp"; - break; - ], - [AC_MSG_RESULT([no])]) - done],[ - AC_MSG_RESULT([no])]) - ],[ - if test X"$cross_compiling" = Xyes; then - search_libsubdirs=$multiarch_libsubdir - else - search_libsubdirs="$multiarch_libsubdir $libsubdirs" - fi - for _AX_BOOST_BASE_boost_path_tmp in /usr /usr/local /opt /opt/local ; do - if test -d "$_AX_BOOST_BASE_boost_path_tmp/include/boost" && test -r "$_AX_BOOST_BASE_boost_path_tmp/include/boost" ; then - for libsubdir in $search_libsubdirs ; do - if ls "$_AX_BOOST_BASE_boost_path_tmp/$libsubdir/libboost_"* >/dev/null 2>&1 ; then break; fi - done - BOOST_LDFLAGS="-L$_AX_BOOST_BASE_boost_path_tmp/$libsubdir" - BOOST_CPPFLAGS="-I$_AX_BOOST_BASE_boost_path_tmp/include" - break; - fi - done - ]) - - dnl overwrite ld flags if we have required special directory with - dnl --with-boost-libdir parameter - AS_IF([test "x$_AX_BOOST_BASE_boost_lib_path" != "x"], - [BOOST_LDFLAGS="-L$_AX_BOOST_BASE_boost_lib_path"]) - - AC_MSG_CHECKING([for boostlib >= $1 ($WANT_BOOST_VERSION)]) - CPPFLAGS_SAVED="$CPPFLAGS" - CPPFLAGS="$CPPFLAGS $BOOST_CPPFLAGS" - export CPPFLAGS - - LDFLAGS_SAVED="$LDFLAGS" - LDFLAGS="$LDFLAGS $BOOST_LDFLAGS" - export LDFLAGS - - AC_REQUIRE([AC_PROG_CXX]) - AC_LANG_PUSH(C++) - AC_COMPILE_IFELSE([_AX_BOOST_BASE_PROGRAM($WANT_BOOST_VERSION)],[ - AC_MSG_RESULT(yes) - succeeded=yes - found_system=yes - ],[ - ]) - AC_LANG_POP([C++]) - - - - dnl if we found no boost with system layout we search for boost libraries - dnl built and installed without the --layout=system option or for a staged(not installed) version - if test "x$succeeded" != "xyes" ; then - CPPFLAGS="$CPPFLAGS_SAVED" - LDFLAGS="$LDFLAGS_SAVED" - BOOST_CPPFLAGS= - if test -z "$_AX_BOOST_BASE_boost_lib_path" ; then - BOOST_LDFLAGS= - fi - _version=0 - if test -n "$_AX_BOOST_BASE_boost_path" ; then - if test -d "$_AX_BOOST_BASE_boost_path" && test -r "$_AX_BOOST_BASE_boost_path"; then - for i in `ls -d $_AX_BOOST_BASE_boost_path/include/boost-* 2>/dev/null`; do - _version_tmp=`echo $i | sed "s#$_AX_BOOST_BASE_boost_path##" | sed 's/\/include\/boost-//' | sed 's/_/./'` - V_CHECK=`expr $_version_tmp \> $_version` - if test "x$V_CHECK" = "x1" ; then - _version=$_version_tmp - fi - VERSION_UNDERSCORE=`echo $_version | sed 's/\./_/'` - BOOST_CPPFLAGS="-I$_AX_BOOST_BASE_boost_path/include/boost-$VERSION_UNDERSCORE" - done - dnl if nothing found search for layout used in Windows distributions - if test -z "$BOOST_CPPFLAGS"; then - if test -d "$_AX_BOOST_BASE_boost_path/boost" && test -r "$_AX_BOOST_BASE_boost_path/boost"; then - BOOST_CPPFLAGS="-I$_AX_BOOST_BASE_boost_path" - fi - fi - dnl if we found something and BOOST_LDFLAGS was unset before - dnl (because "$_AX_BOOST_BASE_boost_lib_path" = ""), set it here. - if test -n "$BOOST_CPPFLAGS" && test -z "$BOOST_LDFLAGS"; then - for libsubdir in $libsubdirs ; do - if ls "$_AX_BOOST_BASE_boost_path/$libsubdir/libboost_"* >/dev/null 2>&1 ; then break; fi - done - BOOST_LDFLAGS="-L$_AX_BOOST_BASE_boost_path/$libsubdir" - fi - fi - else - if test "x$cross_compiling" != "xyes" ; then - for _AX_BOOST_BASE_boost_path in /usr /usr/local /opt /opt/local ; do - if test -d "$_AX_BOOST_BASE_boost_path" && test -r "$_AX_BOOST_BASE_boost_path" ; then - for i in `ls -d $_AX_BOOST_BASE_boost_path/include/boost-* 2>/dev/null`; do - _version_tmp=`echo $i | sed "s#$_AX_BOOST_BASE_boost_path##" | sed 's/\/include\/boost-//' | sed 's/_/./'` - V_CHECK=`expr $_version_tmp \> $_version` - if test "x$V_CHECK" = "x1" ; then - _version=$_version_tmp - best_path=$_AX_BOOST_BASE_boost_path - fi - done - fi - done - - VERSION_UNDERSCORE=`echo $_version | sed 's/\./_/'` - BOOST_CPPFLAGS="-I$best_path/include/boost-$VERSION_UNDERSCORE" - if test -z "$_AX_BOOST_BASE_boost_lib_path" ; then - for libsubdir in $libsubdirs ; do - if ls "$best_path/$libsubdir/libboost_"* >/dev/null 2>&1 ; then break; fi - done - BOOST_LDFLAGS="-L$best_path/$libsubdir" - fi - fi - - if test -n "$BOOST_ROOT" ; then - for libsubdir in $libsubdirs ; do - if ls "$BOOST_ROOT/stage/$libsubdir/libboost_"* >/dev/null 2>&1 ; then break; fi - done - if test -d "$BOOST_ROOT" && test -r "$BOOST_ROOT" && test -d "$BOOST_ROOT/stage/$libsubdir" && test -r "$BOOST_ROOT/stage/$libsubdir"; then - version_dir=`expr //$BOOST_ROOT : '.*/\(.*\)'` - stage_version=`echo $version_dir | sed 's/boost_//' | sed 's/_/./g'` - stage_version_shorten=`expr $stage_version : '\([[0-9]]*\.[[0-9]]*\)'` - V_CHECK=`expr $stage_version_shorten \>\= $_version` - if test "x$V_CHECK" = "x1" && test -z "$_AX_BOOST_BASE_boost_lib_path" ; then - AC_MSG_NOTICE(We will use a staged boost library from $BOOST_ROOT) - BOOST_CPPFLAGS="-I$BOOST_ROOT" - BOOST_LDFLAGS="-L$BOOST_ROOT/stage/$libsubdir" - fi - fi - fi - fi - - CPPFLAGS="$CPPFLAGS $BOOST_CPPFLAGS" - export CPPFLAGS - LDFLAGS="$LDFLAGS $BOOST_LDFLAGS" - export LDFLAGS - - AC_LANG_PUSH(C++) - AC_COMPILE_IFELSE([_AX_BOOST_BASE_PROGRAM($WANT_BOOST_VERSION)],[ - AC_MSG_RESULT(yes) - succeeded=yes - found_system=yes - ],[ - ]) - AC_LANG_POP([C++]) - fi - - if test "x$succeeded" != "xyes" ; then - if test "x$_version" = "x0" ; then - AC_MSG_NOTICE([[We could not detect the boost libraries (version $1 or higher). If you have a staged boost library (still not installed) please specify \$BOOST_ROOT in your environment and do not give a PATH to --with-boost option. If you are sure you have boost installed, then check your version number looking in . See http://randspringer.de/boost for more documentation.]]) - else - AC_MSG_NOTICE([Your boost libraries seems to old (version $_version).]) - fi - # execute ACTION-IF-NOT-FOUND (if present): - ifelse([$3], , :, [$3]) - else - AC_DEFINE(HAVE_BOOST,,[define if the Boost library is available]) - # execute ACTION-IF-FOUND (if present): - ifelse([$2], , :, [$2]) - fi - - CPPFLAGS="$CPPFLAGS_SAVED" - LDFLAGS="$LDFLAGS_SAVED" - -]) \ No newline at end of file diff --git a/m4/ax_boost_iostreams.m4 b/m4/ax_boost_iostreams.m4 deleted file mode 100644 index 9d73626..0000000 --- a/m4/ax_boost_iostreams.m4 +++ /dev/null @@ -1,116 +0,0 @@ -# =========================================================================== -# http://www.gnu.org/software/autoconf-archive/ax_boost_iostreams.html -# =========================================================================== -# -# SYNOPSIS -# -# AX_BOOST_IOSTREAMS -# -# DESCRIPTION -# -# Test for IOStreams library from the Boost C++ libraries. The macro -# requires a preceding call to AX_BOOST_BASE. Further documentation is -# available at . -# -# This macro calls: -# -# AC_SUBST(BOOST_IOSTREAMS_LIB) -# -# And sets: -# -# HAVE_BOOST_IOSTREAMS -# -# LICENSE -# -# Copyright (c) 2008 Thomas Porschberg -# -# Copying and distribution of this file, with or without modification, are -# permitted in any medium without royalty provided the copyright notice -# and this notice are preserved. This file is offered as-is, without any -# warranty. - -#serial 20 - -AC_DEFUN([AX_BOOST_IOSTREAMS], -[ - AC_ARG_WITH([boost-iostreams], - AS_HELP_STRING([--with-boost-iostreams@<:@=special-lib@:>@], - [use the IOStreams library from boost - it is possible to specify a certain library for the linker - e.g. --with-boost-iostreams=boost_iostreams-gcc-mt-d-1_33_1 ]), - [ - if test "$withval" = "no"; then - want_boost="no" - elif test "$withval" = "yes"; then - want_boost="yes" - ax_boost_user_iostreams_lib="" - else - want_boost="yes" - ax_boost_user_iostreams_lib="$withval" - fi - ], - [want_boost="yes"] - ) - - if test "x$want_boost" = "xyes"; then - AC_REQUIRE([AC_PROG_CC]) - CPPFLAGS_SAVED="$CPPFLAGS" - CPPFLAGS="$CPPFLAGS $BOOST_CPPFLAGS" - export CPPFLAGS - - LDFLAGS_SAVED="$LDFLAGS" - LDFLAGS="$LDFLAGS $BOOST_LDFLAGS" - export LDFLAGS - - AC_CACHE_CHECK(whether the Boost::IOStreams library is available, - ax_cv_boost_iostreams, - [AC_LANG_PUSH([C++]) - AC_COMPILE_IFELSE([AC_LANG_PROGRAM([[@%:@include - @%:@include - ]], - [[std::string input = "Hello World!"; - namespace io = boost::iostreams; - io::filtering_istream in(boost::make_iterator_range(input)); - return 0; - ]])], - ax_cv_boost_iostreams=yes, ax_cv_boost_iostreams=no) - AC_LANG_POP([C++]) - ]) - if test "x$ax_cv_boost_iostreams" = "xyes"; then - AC_DEFINE(HAVE_BOOST_IOSTREAMS,,[define if the Boost::IOStreams library is available]) - BOOSTLIBDIR=`echo $BOOST_LDFLAGS | sed -e 's/@<:@^\/@:>@*//'` - if test "x$ax_boost_user_iostreams_lib" = "x"; then - for libextension in `ls $BOOSTLIBDIR/libboost_iostreams*.so* $BOOSTLIBDIR/libboost_iostream*.dylib* $BOOSTLIBDIR/libboost_iostreams*.a* 2>/dev/null | sed 's,.*/,,' | sed -e 's;^lib\(boost_iostreams.*\)\.so.*$;\1;' -e 's;^lib\(boost_iostream.*\)\.dylib.*$;\1;' -e 's;^lib\(boost_iostreams.*\)\.a.*$;\1;'` ; do - ax_lib=${libextension} - AC_CHECK_LIB($ax_lib, exit, - [BOOST_IOSTREAMS_LIB="-l$ax_lib"; AC_SUBST(BOOST_IOSTREAMS_LIB) link_iostreams="yes"; break], - [link_iostreams="no"]) - done - if test "x$link_iostreams" != "xyes"; then - for libextension in `ls $BOOSTLIBDIR/boost_iostreams*.dll* $BOOSTLIBDIR/boost_iostreams*.a* 2>/dev/null | sed 's,.*/,,' | sed -e 's;^\(boost_iostreams.*\)\.dll.*$;\1;' -e 's;^\(boost_iostreams.*\)\.a.*$;\1;'` ; do - ax_lib=${libextension} - AC_CHECK_LIB($ax_lib, exit, - [BOOST_IOSTREAMS_LIB="-l$ax_lib"; AC_SUBST(BOOST_IOSTREAMS_LIB) link_iostreams="yes"; break], - [link_iostreams="no"]) - done - fi - - else - for ax_lib in $ax_boost_user_iostreams_lib boost_iostreams-$ax_boost_user_iostreams_lib; do - AC_CHECK_LIB($ax_lib, main, - [BOOST_IOSTREAMS_LIB="-l$ax_lib"; AC_SUBST(BOOST_IOSTREAMS_LIB) link_iostreams="yes"; break], - [link_iostreams="no"]) - done - - fi - if test "x$ax_lib" = "x"; then - AC_MSG_ERROR(Could not find a version of the library!) - fi - if test "x$link_iostreams" != "xyes"; then - AC_MSG_ERROR(Could not link against $ax_lib !) - fi - fi - - CPPFLAGS="$CPPFLAGS_SAVED" - LDFLAGS="$LDFLAGS_SAVED" - fi -]) diff --git a/m4/ax_boost_system.m4 b/m4/ax_boost_system.m4 deleted file mode 100644 index a2585a5..0000000 --- a/m4/ax_boost_system.m4 +++ /dev/null @@ -1,121 +0,0 @@ -# =========================================================================== -# https://www.gnu.org/software/autoconf-archive/ax_boost_system.html -# =========================================================================== -# -# SYNOPSIS -# -# AX_BOOST_SYSTEM -# -# DESCRIPTION -# -# Test for System library from the Boost C++ libraries. The macro requires -# a preceding call to AX_BOOST_BASE. Further documentation is available at -# . -# -# This macro calls: -# -# AC_SUBST(BOOST_SYSTEM_LIB) -# -# And sets: -# -# HAVE_BOOST_SYSTEM -# -# LICENSE -# -# Copyright (c) 2008 Thomas Porschberg -# Copyright (c) 2008 Michael Tindal -# Copyright (c) 2008 Daniel Casimiro -# -# Copying and distribution of this file, with or without modification, are -# permitted in any medium without royalty provided the copyright notice -# and this notice are preserved. This file is offered as-is, without any -# warranty. - -#serial 19 - -AC_DEFUN([AX_BOOST_SYSTEM], -[ - AC_ARG_WITH([boost-system], - AS_HELP_STRING([--with-boost-system@<:@=special-lib@:>@], - [use the System library from boost - it is possible to specify a certain library for the linker - e.g. --with-boost-system=boost_system-gcc-mt ]), - [ - if test "$withval" = "no"; then - want_boost="no" - elif test "$withval" = "yes"; then - want_boost="yes" - ax_boost_user_system_lib="" - else - want_boost="yes" - ax_boost_user_system_lib="$withval" - fi - ], - [want_boost="yes"] - ) - - if test "x$want_boost" = "xyes"; then - AC_REQUIRE([AC_PROG_CC]) - AC_REQUIRE([AC_CANONICAL_BUILD]) - CPPFLAGS_SAVED="$CPPFLAGS" - CPPFLAGS="$CPPFLAGS $BOOST_CPPFLAGS" - export CPPFLAGS - - LDFLAGS_SAVED="$LDFLAGS" - LDFLAGS="$LDFLAGS $BOOST_LDFLAGS" - export LDFLAGS - - AC_CACHE_CHECK(whether the Boost::System library is available, - ax_cv_boost_system, - [AC_LANG_PUSH([C++]) - CXXFLAGS_SAVE=$CXXFLAGS - CXXFLAGS= - - AC_COMPILE_IFELSE([AC_LANG_PROGRAM([[@%:@include ]], - [[boost::system::error_category *a = 0;]])], - ax_cv_boost_system=yes, ax_cv_boost_system=no) - CXXFLAGS=$CXXFLAGS_SAVE - AC_LANG_POP([C++]) - ]) - if test "x$ax_cv_boost_system" = "xyes"; then - AC_SUBST(BOOST_CPPFLAGS) - - AC_DEFINE(HAVE_BOOST_SYSTEM,,[define if the Boost::System library is available]) - BOOSTLIBDIR=`echo $BOOST_LDFLAGS | sed -e 's/@<:@^\/@:>@*//'` - - LDFLAGS_SAVE=$LDFLAGS - if test "x$ax_boost_user_system_lib" = "x"; then - for libextension in `ls -r $BOOSTLIBDIR/libboost_system* 2>/dev/null | sed 's,.*/lib,,' | sed 's,\..*,,'` ; do - ax_lib=${libextension} - AC_CHECK_LIB($ax_lib, exit, - [BOOST_SYSTEM_LIB="-l$ax_lib"; AC_SUBST(BOOST_SYSTEM_LIB) link_system="yes"; break], - [link_system="no"]) - done - if test "x$link_system" != "xyes"; then - for libextension in `ls -r $BOOSTLIBDIR/boost_system* 2>/dev/null | sed 's,.*/,,' | sed -e 's,\..*,,'` ; do - ax_lib=${libextension} - AC_CHECK_LIB($ax_lib, exit, - [BOOST_SYSTEM_LIB="-l$ax_lib"; AC_SUBST(BOOST_SYSTEM_LIB) link_system="yes"; break], - [link_system="no"]) - done - fi - - else - for ax_lib in $ax_boost_user_system_lib boost_system-$ax_boost_user_system_lib; do - AC_CHECK_LIB($ax_lib, exit, - [BOOST_SYSTEM_LIB="-l$ax_lib"; AC_SUBST(BOOST_SYSTEM_LIB) link_system="yes"; break], - [link_system="no"]) - done - - fi - if test "x$ax_lib" = "x"; then - AC_MSG_ERROR(Could not find a version of the library!) - fi - if test "x$link_system" = "xno"; then - AC_MSG_ERROR(Could not link against $ax_lib !) - fi - fi - - CPPFLAGS="$CPPFLAGS_SAVED" - LDFLAGS="$LDFLAGS_SAVED" - fi -]) \ No newline at end of file diff --git a/m4/ax_check_compile_flag.m4 b/m4/ax_check_compile_flag.m4 deleted file mode 100644 index c3a8d69..0000000 --- a/m4/ax_check_compile_flag.m4 +++ /dev/null @@ -1,72 +0,0 @@ -# =========================================================================== -# http://www.gnu.org/software/autoconf-archive/ax_check_compile_flag.html -# =========================================================================== -# -# SYNOPSIS -# -# AX_CHECK_COMPILE_FLAG(FLAG, [ACTION-SUCCESS], [ACTION-FAILURE], [EXTRA-FLAGS]) -# -# DESCRIPTION -# -# Check whether the given FLAG works with the current language's compiler -# or gives an error. (Warnings, however, are ignored) -# -# ACTION-SUCCESS/ACTION-FAILURE are shell commands to execute on -# success/failure. -# -# If EXTRA-FLAGS is defined, it is added to the current language's default -# flags (e.g. CFLAGS) when the check is done. The check is thus made with -# the flags: "CFLAGS EXTRA-FLAGS FLAG". This can for example be used to -# force the compiler to issue an error when a bad flag is given. -# -# NOTE: Implementation based on AX_CFLAGS_GCC_OPTION. Please keep this -# macro in sync with AX_CHECK_{PREPROC,LINK}_FLAG. -# -# LICENSE -# -# Copyright (c) 2008 Guido U. Draheim -# Copyright (c) 2011 Maarten Bosmans -# -# This program is free software: you can redistribute it and/or modify it -# under the terms of the GNU General Public License as published by the -# Free Software Foundation, either version 3 of the License, or (at your -# option) any later version. -# -# This program is distributed in the hope that it will be useful, but -# WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General -# Public License for more details. -# -# You should have received a copy of the GNU General Public License along -# with this program. If not, see . -# -# As a special exception, the respective Autoconf Macro's copyright owner -# gives unlimited permission to copy, distribute and modify the configure -# scripts that are the output of Autoconf when processing the Macro. You -# need not follow the terms of the GNU General Public License when using -# or distributing such scripts, even though portions of the text of the -# Macro appear in them. The GNU General Public License (GPL) does govern -# all other use of the material that constitutes the Autoconf Macro. -# -# This special exception to the GPL applies to versions of the Autoconf -# Macro released by the Autoconf Archive. When you make and distribute a -# modified version of the Autoconf Macro, you may extend this special -# exception to the GPL to apply to your modified version as well. - -#serial 2 - -AC_DEFUN([AX_CHECK_COMPILE_FLAG], -[AC_PREREQ(2.59)dnl for _AC_LANG_PREFIX -AS_VAR_PUSHDEF([CACHEVAR],[ax_cv_check_[]_AC_LANG_ABBREV[]flags_$4_$1])dnl -AC_CACHE_CHECK([whether _AC_LANG compiler accepts $1], CACHEVAR, [ - ax_check_save_flags=$[]_AC_LANG_PREFIX[]FLAGS - _AC_LANG_PREFIX[]FLAGS="$[]_AC_LANG_PREFIX[]FLAGS $4 $1" - AC_COMPILE_IFELSE([AC_LANG_PROGRAM()], - [AS_VAR_SET(CACHEVAR,[yes])], - [AS_VAR_SET(CACHEVAR,[no])]) - _AC_LANG_PREFIX[]FLAGS=$ax_check_save_flags]) -AS_IF([test x"AS_VAR_GET(CACHEVAR)" = xyes], - [m4_default([$2], :)], - [m4_default([$3], :)]) -AS_VAR_POPDEF([CACHEVAR])dnl -])dnl AX_CHECK_COMPILE_FLAGS diff --git a/m4/ax_cxx_compile_stdcxx.m4 b/m4/ax_cxx_compile_stdcxx.m4 deleted file mode 100644 index 036e8b4..0000000 --- a/m4/ax_cxx_compile_stdcxx.m4 +++ /dev/null @@ -1,982 +0,0 @@ -# =========================================================================== -# https://www.gnu.org/software/autoconf-archive/ax_cxx_compile_stdcxx.html -# =========================================================================== -# -# SYNOPSIS -# -# AX_CXX_COMPILE_STDCXX(VERSION, [ext|noext], [mandatory|optional]) -# -# DESCRIPTION -# -# Check for baseline language coverage in the compiler for the specified -# version of the C++ standard. If necessary, add switches to CXX and -# CXXCPP to enable support. VERSION may be '11' (for the C++11 standard) -# or '14' (for the C++14 standard). -# -# The second argument, if specified, indicates whether you insist on an -# extended mode (e.g. -std=gnu++11) or a strict conformance mode (e.g. -# -std=c++11). If neither is specified, you get whatever works, with -# preference for an extended mode. -# -# The third argument, if specified 'mandatory' or if left unspecified, -# indicates that baseline support for the specified C++ standard is -# required and that the macro should error out if no mode with that -# support is found. If specified 'optional', then configuration proceeds -# regardless, after defining HAVE_CXX${VERSION} if and only if a -# supporting mode is found. -# -# LICENSE -# -# Copyright (c) 2008 Benjamin Kosnik -# Copyright (c) 2012 Zack Weinberg -# Copyright (c) 2013 Roy Stogner -# Copyright (c) 2014, 2015 Google Inc.; contributed by Alexey Sokolov -# Copyright (c) 2015 Paul Norman -# Copyright (c) 2015 Moritz Klammler -# Copyright (c) 2016 Krzesimir Nowak -# -# Copying and distribution of this file, with or without modification, are -# permitted in any medium without royalty provided the copyright notice -# and this notice are preserved. This file is offered as-is, without any -# warranty. - -#serial 7 - -dnl This macro is based on the code from the AX_CXX_COMPILE_STDCXX_11 macro -dnl (serial version number 13). - -AX_REQUIRE_DEFINED([AC_MSG_WARN]) -AC_DEFUN([AX_CXX_COMPILE_STDCXX], [dnl - m4_if([$1], [11], [ax_cxx_compile_alternatives="11 0x"], - [$1], [14], [ax_cxx_compile_alternatives="14 1y"], - [$1], [17], [ax_cxx_compile_alternatives="17 1z"], - [m4_fatal([invalid first argument `$1' to AX_CXX_COMPILE_STDCXX])])dnl - m4_if([$2], [], [], - [$2], [ext], [], - [$2], [noext], [], - [m4_fatal([invalid second argument `$2' to AX_CXX_COMPILE_STDCXX])])dnl - m4_if([$3], [], [ax_cxx_compile_cxx$1_required=true], - [$3], [mandatory], [ax_cxx_compile_cxx$1_required=true], - [$3], [optional], [ax_cxx_compile_cxx$1_required=false], - [m4_fatal([invalid third argument `$3' to AX_CXX_COMPILE_STDCXX])]) - AC_LANG_PUSH([C++])dnl - ac_success=no - AC_CACHE_CHECK(whether $CXX supports C++$1 features by default, - ax_cv_cxx_compile_cxx$1, - [AC_COMPILE_IFELSE([AC_LANG_SOURCE([_AX_CXX_COMPILE_STDCXX_testbody_$1])], - [ax_cv_cxx_compile_cxx$1=yes], - [ax_cv_cxx_compile_cxx$1=no])]) - if test x$ax_cv_cxx_compile_cxx$1 = xyes; then - ac_success=yes - fi - - m4_if([$2], [noext], [], [dnl - if test x$ac_success = xno; then - for alternative in ${ax_cxx_compile_alternatives}; do - switch="-std=gnu++${alternative}" - cachevar=AS_TR_SH([ax_cv_cxx_compile_cxx$1_$switch]) - AC_CACHE_CHECK(whether $CXX supports C++$1 features with $switch, - $cachevar, - [ac_save_CXX="$CXX" - CXX="$CXX $switch" - AC_COMPILE_IFELSE([AC_LANG_SOURCE([_AX_CXX_COMPILE_STDCXX_testbody_$1])], - [eval $cachevar=yes], - [eval $cachevar=no]) - CXX="$ac_save_CXX"]) - if eval test x\$$cachevar = xyes; then - CXX="$CXX $switch" - if test -n "$CXXCPP" ; then - CXXCPP="$CXXCPP $switch" - fi - ac_success=yes - break - fi - done - fi]) - - m4_if([$2], [ext], [], [dnl - if test x$ac_success = xno; then - dnl HP's aCC needs +std=c++11 according to: - dnl http://h21007.www2.hp.com/portal/download/files/unprot/aCxx/PDF_Release_Notes/769149-001.pdf - dnl Cray's crayCC needs "-h std=c++11" - for alternative in ${ax_cxx_compile_alternatives}; do - for switch in -std=c++${alternative} +std=c++${alternative} "-h std=c++${alternative}"; do - cachevar=AS_TR_SH([ax_cv_cxx_compile_cxx$1_$switch]) - AC_CACHE_CHECK(whether $CXX supports C++$1 features with $switch, - $cachevar, - [ac_save_CXX="$CXX" - CXX="$CXX $switch" - AC_COMPILE_IFELSE([AC_LANG_SOURCE([_AX_CXX_COMPILE_STDCXX_testbody_$1])], - [eval $cachevar=yes], - [eval $cachevar=no]) - CXX="$ac_save_CXX"]) - if eval test x\$$cachevar = xyes; then - CXX="$CXX $switch" - if test -n "$CXXCPP" ; then - CXXCPP="$CXXCPP $switch" - fi - ac_success=yes - break - fi - done - if test x$ac_success = xyes; then - break - fi - done - fi]) - AC_LANG_POP([C++]) - if test x$ax_cxx_compile_cxx$1_required = xtrue; then - if test x$ac_success = xno; then - AC_MSG_ERROR([*** A compiler with support for C++$1 language features is required.]) - fi - fi - if test x$ac_success = xno; then - HAVE_CXX$1=0 - AC_MSG_NOTICE([No compiler with C++$1 support was found]) - else - HAVE_CXX$1=1 - AC_DEFINE(HAVE_CXX$1,1, - [define if the compiler supports basic C++$1 syntax]) - fi - AC_SUBST(HAVE_CXX$1) - m4_if([$1], [17], [AC_MSG_WARN([C++17 is not yet standardized, so the checks may change in incompatible ways anytime])]) -]) - - -dnl Test body for checking C++11 support - -m4_define([_AX_CXX_COMPILE_STDCXX_testbody_11], - _AX_CXX_COMPILE_STDCXX_testbody_new_in_11 -) - - -dnl Test body for checking C++14 support - -m4_define([_AX_CXX_COMPILE_STDCXX_testbody_14], - _AX_CXX_COMPILE_STDCXX_testbody_new_in_11 - _AX_CXX_COMPILE_STDCXX_testbody_new_in_14 -) - -m4_define([_AX_CXX_COMPILE_STDCXX_testbody_17], - _AX_CXX_COMPILE_STDCXX_testbody_new_in_11 - _AX_CXX_COMPILE_STDCXX_testbody_new_in_14 - _AX_CXX_COMPILE_STDCXX_testbody_new_in_17 -) - -dnl Tests for new features in C++11 - -m4_define([_AX_CXX_COMPILE_STDCXX_testbody_new_in_11], [[ - -// If the compiler admits that it is not ready for C++11, why torture it? -// Hopefully, this will speed up the test. - -#ifndef __cplusplus - -#error "This is not a C++ compiler" - -#elif __cplusplus < 201103L - -#error "This is not a C++11 compiler" - -#else - -namespace cxx11 -{ - - namespace test_static_assert - { - - template - struct check - { - static_assert(sizeof(int) <= sizeof(T), "not big enough"); - }; - - } - - namespace test_final_override - { - - struct Base - { - virtual void f() {} - }; - - struct Derived : public Base - { - virtual void f() override {} - }; - - } - - namespace test_double_right_angle_brackets - { - - template < typename T > - struct check {}; - - typedef check single_type; - typedef check> double_type; - typedef check>> triple_type; - typedef check>>> quadruple_type; - - } - - namespace test_decltype - { - - int - f() - { - int a = 1; - decltype(a) b = 2; - return a + b; - } - - } - - namespace test_type_deduction - { - - template < typename T1, typename T2 > - struct is_same - { - static const bool value = false; - }; - - template < typename T > - struct is_same - { - static const bool value = true; - }; - - template < typename T1, typename T2 > - auto - add(T1 a1, T2 a2) -> decltype(a1 + a2) - { - return a1 + a2; - } - - int - test(const int c, volatile int v) - { - static_assert(is_same::value == true, ""); - static_assert(is_same::value == false, ""); - static_assert(is_same::value == false, ""); - auto ac = c; - auto av = v; - auto sumi = ac + av + 'x'; - auto sumf = ac + av + 1.0; - static_assert(is_same::value == true, ""); - static_assert(is_same::value == true, ""); - static_assert(is_same::value == true, ""); - static_assert(is_same::value == false, ""); - static_assert(is_same::value == true, ""); - return (sumf > 0.0) ? sumi : add(c, v); - } - - } - - namespace test_noexcept - { - - int f() { return 0; } - int g() noexcept { return 0; } - - static_assert(noexcept(f()) == false, ""); - static_assert(noexcept(g()) == true, ""); - - } - - namespace test_constexpr - { - - template < typename CharT > - unsigned long constexpr - strlen_c_r(const CharT *const s, const unsigned long acc) noexcept - { - return *s ? strlen_c_r(s + 1, acc + 1) : acc; - } - - template < typename CharT > - unsigned long constexpr - strlen_c(const CharT *const s) noexcept - { - return strlen_c_r(s, 0UL); - } - - static_assert(strlen_c("") == 0UL, ""); - static_assert(strlen_c("1") == 1UL, ""); - static_assert(strlen_c("example") == 7UL, ""); - static_assert(strlen_c("another\0example") == 7UL, ""); - - } - - namespace test_rvalue_references - { - - template < int N > - struct answer - { - static constexpr int value = N; - }; - - answer<1> f(int&) { return answer<1>(); } - answer<2> f(const int&) { return answer<2>(); } - answer<3> f(int&&) { return answer<3>(); } - - void - test() - { - int i = 0; - const int c = 0; - static_assert(decltype(f(i))::value == 1, ""); - static_assert(decltype(f(c))::value == 2, ""); - static_assert(decltype(f(0))::value == 3, ""); - } - - } - - namespace test_uniform_initialization - { - - struct test - { - static const int zero {}; - static const int one {1}; - }; - - static_assert(test::zero == 0, ""); - static_assert(test::one == 1, ""); - - } - - namespace test_lambdas - { - - void - test1() - { - auto lambda1 = [](){}; - auto lambda2 = lambda1; - lambda1(); - lambda2(); - } - - int - test2() - { - auto a = [](int i, int j){ return i + j; }(1, 2); - auto b = []() -> int { return '0'; }(); - auto c = [=](){ return a + b; }(); - auto d = [&](){ return c; }(); - auto e = [a, &b](int x) mutable { - const auto identity = [](int y){ return y; }; - for (auto i = 0; i < a; ++i) - a += b--; - return x + identity(a + b); - }(0); - return a + b + c + d + e; - } - - int - test3() - { - const auto nullary = [](){ return 0; }; - const auto unary = [](int x){ return x; }; - using nullary_t = decltype(nullary); - using unary_t = decltype(unary); - const auto higher1st = [](nullary_t f){ return f(); }; - const auto higher2nd = [unary](nullary_t f1){ - return [unary, f1](unary_t f2){ return f2(unary(f1())); }; - }; - return higher1st(nullary) + higher2nd(nullary)(unary); - } - - } - - namespace test_variadic_templates - { - - template - struct sum; - - template - struct sum - { - static constexpr auto value = N0 + sum::value; - }; - - template <> - struct sum<> - { - static constexpr auto value = 0; - }; - - static_assert(sum<>::value == 0, ""); - static_assert(sum<1>::value == 1, ""); - static_assert(sum<23>::value == 23, ""); - static_assert(sum<1, 2>::value == 3, ""); - static_assert(sum<5, 5, 11>::value == 21, ""); - static_assert(sum<2, 3, 5, 7, 11, 13>::value == 41, ""); - - } - - // http://stackoverflow.com/questions/13728184/template-aliases-and-sfinae - // Clang 3.1 fails with headers of libstd++ 4.8.3 when using std::function - // because of this. - namespace test_template_alias_sfinae - { - - struct foo {}; - - template - using member = typename T::member_type; - - template - void func(...) {} - - template - void func(member*) {} - - void test(); - - void test() { func(0); } - - } - -} // namespace cxx11 - -#endif // __cplusplus >= 201103L - -]]) - - -dnl Tests for new features in C++14 - -m4_define([_AX_CXX_COMPILE_STDCXX_testbody_new_in_14], [[ - -// If the compiler admits that it is not ready for C++14, why torture it? -// Hopefully, this will speed up the test. - -#ifndef __cplusplus - -#error "This is not a C++ compiler" - -#elif __cplusplus < 201402L - -#error "This is not a C++14 compiler" - -#else - -namespace cxx14 -{ - - namespace test_polymorphic_lambdas - { - - int - test() - { - const auto lambda = [](auto&&... args){ - const auto istiny = [](auto x){ - return (sizeof(x) == 1UL) ? 1 : 0; - }; - const int aretiny[] = { istiny(args)... }; - return aretiny[0]; - }; - return lambda(1, 1L, 1.0f, '1'); - } - - } - - namespace test_binary_literals - { - - constexpr auto ivii = 0b0000000000101010; - static_assert(ivii == 42, "wrong value"); - - } - - namespace test_generalized_constexpr - { - - template < typename CharT > - constexpr unsigned long - strlen_c(const CharT *const s) noexcept - { - auto length = 0UL; - for (auto p = s; *p; ++p) - ++length; - return length; - } - - static_assert(strlen_c("") == 0UL, ""); - static_assert(strlen_c("x") == 1UL, ""); - static_assert(strlen_c("test") == 4UL, ""); - static_assert(strlen_c("another\0test") == 7UL, ""); - - } - - namespace test_lambda_init_capture - { - - int - test() - { - auto x = 0; - const auto lambda1 = [a = x](int b){ return a + b; }; - const auto lambda2 = [a = lambda1(x)](){ return a; }; - return lambda2(); - } - - } - - namespace test_digit_separators - { - - constexpr auto ten_million = 100'000'000; - static_assert(ten_million == 100000000, ""); - - } - - namespace test_return_type_deduction - { - - auto f(int& x) { return x; } - decltype(auto) g(int& x) { return x; } - - template < typename T1, typename T2 > - struct is_same - { - static constexpr auto value = false; - }; - - template < typename T > - struct is_same - { - static constexpr auto value = true; - }; - - int - test() - { - auto x = 0; - static_assert(is_same::value, ""); - static_assert(is_same::value, ""); - return x; - } - - } - -} // namespace cxx14 - -#endif // __cplusplus >= 201402L - -]]) - - -dnl Tests for new features in C++17 - -m4_define([_AX_CXX_COMPILE_STDCXX_testbody_new_in_17], [[ - -// If the compiler admits that it is not ready for C++17, why torture it? -// Hopefully, this will speed up the test. - -#ifndef __cplusplus - -#error "This is not a C++ compiler" - -#elif __cplusplus <= 201402L - -#error "This is not a C++17 compiler" - -#else - -#if defined(__clang__) - #define REALLY_CLANG -#else - #if defined(__GNUC__) - #define REALLY_GCC - #endif -#endif - -#include -#include -#include - -namespace cxx17 -{ - -#if !defined(REALLY_CLANG) - namespace test_constexpr_lambdas - { - - // TODO: test it with clang++ from git - - constexpr int foo = [](){return 42;}(); - - } -#endif // !defined(REALLY_CLANG) - - namespace test::nested_namespace::definitions - { - - } - - namespace test_fold_expression - { - - template - int multiply(Args... args) - { - return (args * ... * 1); - } - - template - bool all(Args... args) - { - return (args && ...); - } - - } - - namespace test_extended_static_assert - { - - static_assert (true); - - } - - namespace test_auto_brace_init_list - { - - auto foo = {5}; - auto bar {5}; - - static_assert(std::is_same, decltype(foo)>::value); - static_assert(std::is_same::value); - } - - namespace test_typename_in_template_template_parameter - { - - template typename X> struct D; - - } - - namespace test_fallthrough_nodiscard_maybe_unused_attributes - { - - int f1() - { - return 42; - } - - [[nodiscard]] int f2() - { - [[maybe_unused]] auto unused = f1(); - - switch (f1()) - { - case 17: - f1(); - [[fallthrough]]; - case 42: - f1(); - } - return f1(); - } - - } - - namespace test_extended_aggregate_initialization - { - - struct base1 - { - int b1, b2 = 42; - }; - - struct base2 - { - base2() { - b3 = 42; - } - int b3; - }; - - struct derived : base1, base2 - { - int d; - }; - - derived d1 {{1, 2}, {}, 4}; // full initialization - derived d2 {{}, {}, 4}; // value-initialized bases - - } - - namespace test_general_range_based_for_loop - { - - struct iter - { - int i; - - int& operator* () - { - return i; - } - - const int& operator* () const - { - return i; - } - - iter& operator++() - { - ++i; - return *this; - } - }; - - struct sentinel - { - int i; - }; - - bool operator== (const iter& i, const sentinel& s) - { - return i.i == s.i; - } - - bool operator!= (const iter& i, const sentinel& s) - { - return !(i == s); - } - - struct range - { - iter begin() const - { - return {0}; - } - - sentinel end() const - { - return {5}; - } - }; - - void f() - { - range r {}; - - for (auto i : r) - { - [[maybe_unused]] auto v = i; - } - } - - } - - namespace test_lambda_capture_asterisk_this_by_value - { - - struct t - { - int i; - int foo() - { - return [*this]() - { - return i; - }(); - } - }; - - } - - namespace test_enum_class_construction - { - - enum class byte : unsigned char - {}; - - byte foo {42}; - - } - - namespace test_constexpr_if - { - - template - int f () - { - if constexpr(cond) - { - return 13; - } - else - { - return 42; - } - } - - } - - namespace test_selection_statement_with_initializer - { - - int f() - { - return 13; - } - - int f2() - { - if (auto i = f(); i > 0) - { - return 3; - } - - switch (auto i = f(); i + 4) - { - case 17: - return 2; - - default: - return 1; - } - } - - } - -#if !defined(REALLY_CLANG) - namespace test_template_argument_deduction_for_class_templates - { - - // TODO: test it with clang++ from git - - template - struct pair - { - pair (T1 p1, T2 p2) - : m1 {p1}, - m2 {p2} - {} - - T1 m1; - T2 m2; - }; - - void f() - { - [[maybe_unused]] auto p = pair{13, 42u}; - } - - } -#endif // !defined(REALLY_CLANG) - - namespace test_non_type_auto_template_parameters - { - - template - struct B - {}; - - B<5> b1; - B<'a'> b2; - - } - -#if !defined(REALLY_CLANG) - namespace test_structured_bindings - { - - // TODO: test it with clang++ from git - - int arr[2] = { 1, 2 }; - std::pair pr = { 1, 2 }; - - auto f1() -> int(&)[2] - { - return arr; - } - - auto f2() -> std::pair& - { - return pr; - } - - struct S - { - int x1 : 2; - volatile double y1; - }; - - S f3() - { - return {}; - } - - auto [ x1, y1 ] = f1(); - auto& [ xr1, yr1 ] = f1(); - auto [ x2, y2 ] = f2(); - auto& [ xr2, yr2 ] = f2(); - const auto [ x3, y3 ] = f3(); - - } -#endif // !defined(REALLY_CLANG) - -#if !defined(REALLY_CLANG) - namespace test_exception_spec_type_system - { - - // TODO: test it with clang++ from git - - struct Good {}; - struct Bad {}; - - void g1() noexcept; - void g2(); - - template - Bad - f(T*, T*); - - template - Good - f(T1*, T2*); - - static_assert (std::is_same_v); - - } -#endif // !defined(REALLY_CLANG) - - namespace test_inline_variables - { - - template void f(T) - {} - - template inline T g(T) - { - return T{}; - } - - template<> inline void f<>(int) - {} - - template<> int g<>(int) - { - return 5; - } - - } - -} // namespace cxx17 - -#endif // __cplusplus <= 201402L - -]]) \ No newline at end of file diff --git a/m4/ax_pthread.m4 b/m4/ax_pthread.m4 deleted file mode 100644 index d383ad5..0000000 --- a/m4/ax_pthread.m4 +++ /dev/null @@ -1,332 +0,0 @@ -# =========================================================================== -# http://www.gnu.org/software/autoconf-archive/ax_pthread.html -# =========================================================================== -# -# SYNOPSIS -# -# AX_PTHREAD([ACTION-IF-FOUND[, ACTION-IF-NOT-FOUND]]) -# -# DESCRIPTION -# -# This macro figures out how to build C programs using POSIX threads. It -# sets the PTHREAD_LIBS output variable to the threads library and linker -# flags, and the PTHREAD_CFLAGS output variable to any special C compiler -# flags that are needed. (The user can also force certain compiler -# flags/libs to be tested by setting these environment variables.) -# -# Also sets PTHREAD_CC to any special C compiler that is needed for -# multi-threaded programs (defaults to the value of CC otherwise). (This -# is necessary on AIX to use the special cc_r compiler alias.) -# -# NOTE: You are assumed to not only compile your program with these flags, -# but also link it with them as well. e.g. you should link with -# $PTHREAD_CC $CFLAGS $PTHREAD_CFLAGS $LDFLAGS ... $PTHREAD_LIBS $LIBS -# -# If you are only building threads programs, you may wish to use these -# variables in your default LIBS, CFLAGS, and CC: -# -# LIBS="$PTHREAD_LIBS $LIBS" -# CFLAGS="$CFLAGS $PTHREAD_CFLAGS" -# CC="$PTHREAD_CC" -# -# In addition, if the PTHREAD_CREATE_JOINABLE thread-attribute constant -# has a nonstandard name, defines PTHREAD_CREATE_JOINABLE to that name -# (e.g. PTHREAD_CREATE_UNDETACHED on AIX). -# -# Also HAVE_PTHREAD_PRIO_INHERIT is defined if pthread is found and the -# PTHREAD_PRIO_INHERIT symbol is defined when compiling with -# PTHREAD_CFLAGS. -# -# ACTION-IF-FOUND is a list of shell commands to run if a threads library -# is found, and ACTION-IF-NOT-FOUND is a list of commands to run it if it -# is not found. If ACTION-IF-FOUND is not specified, the default action -# will define HAVE_PTHREAD. -# -# Please let the authors know if this macro fails on any platform, or if -# you have any other suggestions or comments. This macro was based on work -# by SGJ on autoconf scripts for FFTW (http://www.fftw.org/) (with help -# from M. Frigo), as well as ac_pthread and hb_pthread macros posted by -# Alejandro Forero Cuervo to the autoconf macro repository. We are also -# grateful for the helpful feedback of numerous users. -# -# Updated for Autoconf 2.68 by Daniel Richard G. -# -# LICENSE -# -# Copyright (c) 2008 Steven G. Johnson -# Copyright (c) 2011 Daniel Richard G. -# -# This program is free software: you can redistribute it and/or modify it -# under the terms of the GNU General Public License as published by the -# Free Software Foundation, either version 3 of the License, or (at your -# option) any later version. -# -# This program is distributed in the hope that it will be useful, but -# WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General -# Public License for more details. -# -# You should have received a copy of the GNU General Public License along -# with this program. If not, see . -# -# As a special exception, the respective Autoconf Macro's copyright owner -# gives unlimited permission to copy, distribute and modify the configure -# scripts that are the output of Autoconf when processing the Macro. You -# need not follow the terms of the GNU General Public License when using -# or distributing such scripts, even though portions of the text of the -# Macro appear in them. The GNU General Public License (GPL) does govern -# all other use of the material that constitutes the Autoconf Macro. -# -# This special exception to the GPL applies to versions of the Autoconf -# Macro released by the Autoconf Archive. When you make and distribute a -# modified version of the Autoconf Macro, you may extend this special -# exception to the GPL to apply to your modified version as well. - -#serial 21 - -AU_ALIAS([ACX_PTHREAD], [AX_PTHREAD]) -AC_DEFUN([AX_PTHREAD], [ -AC_REQUIRE([AC_CANONICAL_HOST]) -AC_LANG_PUSH([C]) -ax_pthread_ok=no - -# We used to check for pthread.h first, but this fails if pthread.h -# requires special compiler flags (e.g. on True64 or Sequent). -# It gets checked for in the link test anyway. - -# First of all, check if the user has set any of the PTHREAD_LIBS, -# etcetera environment variables, and if threads linking works using -# them: -if test x"$PTHREAD_LIBS$PTHREAD_CFLAGS" != x; then - save_CFLAGS="$CFLAGS" - CFLAGS="$CFLAGS $PTHREAD_CFLAGS" - save_LIBS="$LIBS" - LIBS="$PTHREAD_LIBS $LIBS" - AC_MSG_CHECKING([for pthread_join in LIBS=$PTHREAD_LIBS with CFLAGS=$PTHREAD_CFLAGS]) - AC_TRY_LINK_FUNC([pthread_join], [ax_pthread_ok=yes]) - AC_MSG_RESULT([$ax_pthread_ok]) - if test x"$ax_pthread_ok" = xno; then - PTHREAD_LIBS="" - PTHREAD_CFLAGS="" - fi - LIBS="$save_LIBS" - CFLAGS="$save_CFLAGS" -fi - -# We must check for the threads library under a number of different -# names; the ordering is very important because some systems -# (e.g. DEC) have both -lpthread and -lpthreads, where one of the -# libraries is broken (non-POSIX). - -# Create a list of thread flags to try. Items starting with a "-" are -# C compiler flags, and other items are library names, except for "none" -# which indicates that we try without any flags at all, and "pthread-config" -# which is a program returning the flags for the Pth emulation library. - -ax_pthread_flags="pthreads none -Kthread -kthread lthread -pthread -pthreads -mthreads pthread --thread-safe -mt pthread-config" - -# The ordering *is* (sometimes) important. Some notes on the -# individual items follow: - -# pthreads: AIX (must check this before -lpthread) -# none: in case threads are in libc; should be tried before -Kthread and -# other compiler flags to prevent continual compiler warnings -# -Kthread: Sequent (threads in libc, but -Kthread needed for pthread.h) -# -kthread: FreeBSD kernel threads (preferred to -pthread since SMP-able) -# lthread: LinuxThreads port on FreeBSD (also preferred to -pthread) -# -pthread: Linux/gcc (kernel threads), BSD/gcc (userland threads) -# -pthreads: Solaris/gcc -# -mthreads: Mingw32/gcc, Lynx/gcc -# -mt: Sun Workshop C (may only link SunOS threads [-lthread], but it -# doesn't hurt to check since this sometimes defines pthreads too; -# also defines -D_REENTRANT) -# ... -mt is also the pthreads flag for HP/aCC -# pthread: Linux, etcetera -# --thread-safe: KAI C++ -# pthread-config: use pthread-config program (for GNU Pth library) - -case ${host_os} in - solaris*) - - # On Solaris (at least, for some versions), libc contains stubbed - # (non-functional) versions of the pthreads routines, so link-based - # tests will erroneously succeed. (We need to link with -pthreads/-mt/ - # -lpthread.) (The stubs are missing pthread_cleanup_push, or rather - # a function called by this macro, so we could check for that, but - # who knows whether they'll stub that too in a future libc.) So, - # we'll just look for -pthreads and -lpthread first: - - ax_pthread_flags="-pthreads pthread -mt -pthread $ax_pthread_flags" - ;; - - darwin*) - ax_pthread_flags="-pthread $ax_pthread_flags" - ;; -esac - -# Clang doesn't consider unrecognized options an error unless we specify -# -Werror. We throw in some extra Clang-specific options to ensure that -# this doesn't happen for GCC, which also accepts -Werror. - -AC_MSG_CHECKING([if compiler needs -Werror to reject unknown flags]) -save_CFLAGS="$CFLAGS" -ax_pthread_extra_flags="-Werror" -CFLAGS="$CFLAGS $ax_pthread_extra_flags -Wunknown-warning-option -Wsizeof-array-argument" -AC_COMPILE_IFELSE([AC_LANG_PROGRAM([int foo(void);],[foo()])], - [AC_MSG_RESULT([yes])], - [ax_pthread_extra_flags= - AC_MSG_RESULT([no])]) -CFLAGS="$save_CFLAGS" - -if test x"$ax_pthread_ok" = xno; then -for flag in $ax_pthread_flags; do - - case $flag in - none) - AC_MSG_CHECKING([whether pthreads work without any flags]) - ;; - - -*) - AC_MSG_CHECKING([whether pthreads work with $flag]) - PTHREAD_CFLAGS="$flag" - ;; - - pthread-config) - AC_CHECK_PROG([ax_pthread_config], [pthread-config], [yes], [no]) - if test x"$ax_pthread_config" = xno; then continue; fi - PTHREAD_CFLAGS="`pthread-config --cflags`" - PTHREAD_LIBS="`pthread-config --ldflags` `pthread-config --libs`" - ;; - - *) - AC_MSG_CHECKING([for the pthreads library -l$flag]) - PTHREAD_LIBS="-l$flag" - ;; - esac - - save_LIBS="$LIBS" - save_CFLAGS="$CFLAGS" - LIBS="$PTHREAD_LIBS $LIBS" - CFLAGS="$CFLAGS $PTHREAD_CFLAGS $ax_pthread_extra_flags" - - # Check for various functions. We must include pthread.h, - # since some functions may be macros. (On the Sequent, we - # need a special flag -Kthread to make this header compile.) - # We check for pthread_join because it is in -lpthread on IRIX - # while pthread_create is in libc. We check for pthread_attr_init - # due to DEC craziness with -lpthreads. We check for - # pthread_cleanup_push because it is one of the few pthread - # functions on Solaris that doesn't have a non-functional libc stub. - # We try pthread_create on general principles. - AC_LINK_IFELSE([AC_LANG_PROGRAM([#include - static void routine(void *a) { a = 0; } - static void *start_routine(void *a) { return a; }], - [pthread_t th; pthread_attr_t attr; - pthread_create(&th, 0, start_routine, 0); - pthread_join(th, 0); - pthread_attr_init(&attr); - pthread_cleanup_push(routine, 0); - pthread_cleanup_pop(0) /* ; */])], - [ax_pthread_ok=yes], - []) - - LIBS="$save_LIBS" - CFLAGS="$save_CFLAGS" - - AC_MSG_RESULT([$ax_pthread_ok]) - if test "x$ax_pthread_ok" = xyes; then - break; - fi - - PTHREAD_LIBS="" - PTHREAD_CFLAGS="" -done -fi - -# Various other checks: -if test "x$ax_pthread_ok" = xyes; then - save_LIBS="$LIBS" - LIBS="$PTHREAD_LIBS $LIBS" - save_CFLAGS="$CFLAGS" - CFLAGS="$CFLAGS $PTHREAD_CFLAGS" - - # Detect AIX lossage: JOINABLE attribute is called UNDETACHED. - AC_MSG_CHECKING([for joinable pthread attribute]) - attr_name=unknown - for attr in PTHREAD_CREATE_JOINABLE PTHREAD_CREATE_UNDETACHED; do - AC_LINK_IFELSE([AC_LANG_PROGRAM([#include ], - [int attr = $attr; return attr /* ; */])], - [attr_name=$attr; break], - []) - done - AC_MSG_RESULT([$attr_name]) - if test "$attr_name" != PTHREAD_CREATE_JOINABLE; then - AC_DEFINE_UNQUOTED([PTHREAD_CREATE_JOINABLE], [$attr_name], - [Define to necessary symbol if this constant - uses a non-standard name on your system.]) - fi - - AC_MSG_CHECKING([if more special flags are required for pthreads]) - flag=no - case ${host_os} in - aix* | freebsd* | darwin*) flag="-D_THREAD_SAFE";; - osf* | hpux*) flag="-D_REENTRANT";; - solaris*) - if test "$GCC" = "yes"; then - flag="-D_REENTRANT" - else - # TODO: What about Clang on Solaris? - flag="-mt -D_REENTRANT" - fi - ;; - esac - AC_MSG_RESULT([$flag]) - if test "x$flag" != xno; then - PTHREAD_CFLAGS="$flag $PTHREAD_CFLAGS" - fi - - AC_CACHE_CHECK([for PTHREAD_PRIO_INHERIT], - [ax_cv_PTHREAD_PRIO_INHERIT], [ - AC_LINK_IFELSE([AC_LANG_PROGRAM([[#include ]], - [[int i = PTHREAD_PRIO_INHERIT;]])], - [ax_cv_PTHREAD_PRIO_INHERIT=yes], - [ax_cv_PTHREAD_PRIO_INHERIT=no]) - ]) - AS_IF([test "x$ax_cv_PTHREAD_PRIO_INHERIT" = "xyes"], - [AC_DEFINE([HAVE_PTHREAD_PRIO_INHERIT], [1], [Have PTHREAD_PRIO_INHERIT.])]) - - LIBS="$save_LIBS" - CFLAGS="$save_CFLAGS" - - # More AIX lossage: compile with *_r variant - if test "x$GCC" != xyes; then - case $host_os in - aix*) - AS_CASE(["x/$CC"], - [x*/c89|x*/c89_128|x*/c99|x*/c99_128|x*/cc|x*/cc128|x*/xlc|x*/xlc_v6|x*/xlc128|x*/xlc128_v6], - [#handle absolute path differently from PATH based program lookup - AS_CASE(["x$CC"], - [x/*], - [AS_IF([AS_EXECUTABLE_P([${CC}_r])],[PTHREAD_CC="${CC}_r"])], - [AC_CHECK_PROGS([PTHREAD_CC],[${CC}_r],[$CC])])]) - ;; - esac - fi -fi - -test -n "$PTHREAD_CC" || PTHREAD_CC="$CC" - -AC_SUBST([PTHREAD_LIBS]) -AC_SUBST([PTHREAD_CFLAGS]) -AC_SUBST([PTHREAD_CC]) - -# Finally, execute ACTION-IF-FOUND/ACTION-IF-NOT-FOUND: -if test x"$ax_pthread_ok" = xyes; then - ifelse([$1],,[AC_DEFINE([HAVE_PTHREAD],[1],[Define if you have POSIX threads libraries and header files.])],[$1]) - : -else - ax_pthread_ok=no - $2 -fi -AC_LANG_POP -])dnl AX_PTHREAD diff --git a/m4/ev++.m4 b/m4/ev++.m4 deleted file mode 100644 index 153498d..0000000 --- a/m4/ev++.m4 +++ /dev/null @@ -1,134 +0,0 @@ -dnl @synopsis EV_DEVEL -dnl -dnl This macro tries to find the libev library and header files. -dnl -dnl We define the following configure script flags: -dnl -dnl --with-ev: Give prefix for both library and headers, and try -dnl to guess subdirectory names for each. (e.g. tack /lib and -dnl /include onto given dir name, and other common schemes.) -dnl --with-ev-lib: Similar to --with-ev, but for library only. -dnl --with-ev-include: Similar to --with-ev, but for headers -dnl only. - -AC_DEFUN([EV_DEVEL], -[ - dnl - dnl Set up configure script macros - dnl - AC_ARG_WITH(ev, - [AS_HELP_STRING([--with-ev=],[path containing libev header and library subdirs])], - [EV_lib_check="$with_ev/lib64 $with_ev/lib $with_ev/lib64/libev $with_ev/lib/libev" - EV_inc_check="$with_ev/include $with_ev/include/libev"], - [EV_lib_check="/usr/local/libev/lib64 /usr/local/libev/lib /usr/local/lib64/libev /usr/local/lib/libev /opt/libev/lib64 /opt/libev/lib /usr/lib64/libev /usr/lib/libev /usr/local/lib64 /usr/local/lib /usr/lib64 /usr/lib /usr/lib/x86_64-linux-gnu /usr/lib64/x86_64-linux-gnu" - EV_inc_check="/usr/local/libev/include /usr/local/include/libev /opt/libev/include /usr/local/include/libev /usr/local/include /usr/include/libev /usr/include"]) - AC_ARG_WITH(ev-lib, - [AS_HELP_STRING([--with-ev-lib=],[directory path of libev library])], - [EV_lib_check="$with_ev_lib $with_ev_lib/lib64 $with_ev_lib/lib $with_ev_lib/lib64/libev $with_ev_lib/lib/libev"]) - AC_ARG_WITH(ev-include, - [AS_HELP_STRING([--with-ev-include=],[directory path of libev headers])], - [EV_inc_check="$with_ev_include $with_ev_include/include $with_ev_include/include/libev"]) - - dnl - dnl Look for libev library - dnl - AC_CACHE_CHECK([for libev library location], [ac_cv_ev_lib], - [ - for dir in $EV_lib_check - do - if test -d "$dir" && \ - ( test -f "$dir/libev.so" || - test -f "$dir/libev.a" ) - then - ac_cv_ev_lib=$dir - break - fi - done - - if test -z "$ac_cv_ev_lib" - then - AC_MSG_RESULT([no]) - AC_MSG_ERROR([Didn't find the libev library dir in '$EV_lib_check']) - fi - - case "$ac_cv_ev_lib" in - /* ) - ;; - * ) - AC_MSG_RESULT([]) - AC_MSG_ERROR([The libev library directory ($ac_cv_ev_lib) must be an absolute path.]) - ;; - esac - ]) - AC_SUBST([EV_LIB_DIR],[$ac_cv_ev_lib]) - - dnl - dnl Look for libev header file directory - dnl - AC_CACHE_CHECK([for libev include path], [ac_cv_ev_inc], - [ - for dir in $EV_inc_check - do - if test -d "$dir" && test -f "$dir/ev++.h" - then - ac_cv_ev_inc=$dir - break - fi - done - - if test -z "$ac_cv_ev_inc" - then - AC_MSG_RESULT([no]) - AC_MSG_ERROR([Didn't find the libev header dir in '$EV_inc_check']) - fi - - case "$ac_cv_ev_inc" in - /* ) - ;; - * ) - AC_MSG_RESULT([]) - AC_MSG_ERROR([The libev header directory ($ac_cv_ev_inc) must be an absolute path.]) - ;; - esac - ]) - AC_SUBST([EV_INC_DIR],[$ac_cv_ev_inc]) - - dnl - dnl Now check that the above checks resulted in -I and -L flags that - dnl let us build actual programs against libev. - dnl - case "$ac_cv_ev_lib" in - /usr/lib) - ;; - *) - LDFLAGS="$LDFLAGS -L${ac_cv_ev_lib}" - ;; - esac - CPPFLAGS="$CPPFLAGS -I${ac_cv_ev_inc}" - AC_MSG_CHECKING([that we can build libev programs]) - AC_EGREP_CPP( - [bad_gcc_libev_ver], - [ -#include -#if __GNUC__ && (__GNUC__ < 4 || __GNUC__ == 4 && __GNUC_MINOR__ < 9) && EV_VERSION_MAJOR == 4 && EV_VERSION_MINOR == 18 - bad_gcc_libev_ver -#endif - ], - [AC_MSG_RESULT([no]) - AC_MSG_ERROR([GCC versions prior to 4.9 cannot compile libev 4.18])], - [], - ) - - LIBS="-lev $LIBS" - AC_LANG_PUSH([C++]) - AC_LINK_IFELSE( - [AC_LANG_PROGRAM( - [#include ], - [ev::io i]) - ], - [AC_MSG_RESULT([yes])], - [AC_MSG_RESULT([no]) - AC_MSG_FAILURE([Cannot build libev programs])] - ) - AC_LANG_POP([C++]) -]) dnl End EV_DEVEL diff --git a/m4/mysql++.m4 b/m4/mysql++.m4 deleted file mode 100644 index c475fc9..0000000 --- a/m4/mysql++.m4 +++ /dev/null @@ -1,150 +0,0 @@ -#-###################################################################### -# mysql++.m4 - Example autoconf macro showing how to find MySQL++ -# library and header files. -# -# Copyright (c) 2004-2009 by Educational Technology Resources, Inc. -# -# This file is free software; you can redistribute it and/or modify it -# under the terms of the GNU Lesser General Public License as published -# by the Free Software Foundation; either version 2.1 of the License, or -# (at your option) any later version. -# -# This program is distributed in the hope that it will be useful, but -# WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU -# Lesser General Public License for more details. -# -# You should have received a copy of the GNU Lesser General Public -# License along with MySQL++; if not, write to the Free Software -# Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 -# USA -#-###################################################################### - -dnl @synopsis MYSQLPP_DEVEL -dnl -dnl This macro tries to find the MySQL++ library and header files. -dnl -dnl We define the following configure script flags: -dnl -dnl --with-mysqlpp: Give prefix for both library and headers, and try -dnl to guess subdirectory names for each. (e.g. tack /lib and -dnl /include onto given dir name, and other common schemes.) -dnl --with-mysqlpp-lib: Similar to --with-mysqlpp, but for library only. -dnl --with-mysqlpp-include: Similar to --with-mysqlpp, but for headers -dnl only. -dnl -dnl This macro depends on having the default compiler and linker flags -dnl set up for building programs against the MySQL C API. The mysql.m4 -dnl macro in this directory fits this bill; run it first. -dnl -dnl @version 1.3, 2009/11/22 -dnl @author Warren Young - -AC_DEFUN([MYSQLPP_DEVEL], -[ - dnl - dnl Set up configure script macros - dnl - AC_ARG_WITH(mysqlpp, - [AS_HELP_STRING([--with-mysqlpp=],[path containing MySQL++ header and library subdirs])], - [MYSQLPP_lib_check="$with_mysqlpp/lib64 $with_mysqlpp/lib $with_mysqlpp/lib64/mysql++ $with_mysqlpp/lib/mysql++" - MYSQLPP_inc_check="$with_mysqlpp/include $with_mysqlpp/include/mysql++"], - [MYSQLPP_lib_check="/usr/local/mysql++/lib64 /usr/local/mysql++/lib /usr/local/lib64/mysql++ /usr/local/lib/mysql++ /opt/mysql++/lib64 /opt/mysql++/lib /usr/lib64/mysql++ /usr/lib/mysql++ /usr/local/lib64 /usr/local/lib /usr/lib64 /usr/lib" - MYSQLPP_inc_check="/usr/local/mysql++/include /usr/local/include/mysql++ /opt/mysql++/include /usr/local/include/mysql++ /usr/local/include /usr/include/mysql++ /usr/include"]) - AC_ARG_WITH(mysqlpp-lib, - [AS_HELP_STRING([--with-mysqlpp-lib=],[directory path of MySQL++ library])], - [MYSQLPP_lib_check="$with_mysqlpp_lib $with_mysqlpp_lib/lib64 $with_mysqlpp_lib/lib $with_mysqlpp_lib/lib64/mysql $with_mysqlpp_lib/lib/mysql"]) - AC_ARG_WITH(mysqlpp-include, - [AS_HELP_STRING([--with-mysqlpp-include=],[directory path of MySQL++ headers])], - [MYSQLPP_inc_check="$with_mysqlpp_include $with_mysqlpp_include/include $with_mysqlpp_include/include/mysql"]) - - dnl - dnl Look for MySQL++ library - dnl - AC_CACHE_CHECK([for MySQL++ library location], [ac_cv_mysqlpp_lib], - [ - for dir in $MYSQLPP_lib_check - do - if test -d "$dir" && \ - ( test -f "$dir/libmysqlpp.so" || - test -f "$dir/libmysqlpp.a" ) - then - ac_cv_mysqlpp_lib=$dir - break - fi - done - - if test -z "$ac_cv_mysqlpp_lib" - then - AC_MSG_RESULT([no]) - AC_MSG_ERROR([Didn't find the MySQL++ library dir in '$MYSQLPP_lib_check']) - fi - - case "$ac_cv_mysqlpp_lib" in - /* ) - ;; - * ) - AC_MSG_RESULT([no]) - AC_MSG_ERROR([The MySQL++ library directory ($ac_cv_mysqlpp_lib) must be an absolute path.]) - ;; - esac - ]) - AC_SUBST([MYSQLPP_LIB_DIR],[$ac_cv_mysqlpp_lib]) - - dnl - dnl Look for MySQL++ header file directory - dnl - AC_CACHE_CHECK([for MySQL++ include path], [ac_cv_mysqlpp_inc], - [ - for dir in $MYSQLPP_inc_check - do - if test -d "$dir" && test -f "$dir/mysql++.h" - then - ac_cv_mysqlpp_inc=$dir - break - fi - done - - if test -z "$ac_cv_mysqlpp_inc" - then - AC_MSG_RESULT([no]) - AC_MSG_ERROR([Didn't find the MySQL++ header dir in '$MYSQLPP_inc_check']) - fi - - case "$ac_cv_mysqlpp_inc" in - /* ) - ;; - * ) - AC_MSG_RESULT([no]) - AC_MSG_ERROR([The MySQL++ header directory ($ac_cv_mysqlpp_inc) must be an absolute path.]) - ;; - esac - ]) - AC_SUBST([MYSQLPP_INC_DIR],[$ac_cv_mysqlpp_inc]) - - dnl - dnl Now check that the above checks resulted in -I and -L flags that - dnl let us build actual programs against MySQL++. - dnl - case "$ac_cv_mysqlpp_lib" in - /usr/lib) - ;; - *) - LDFLAGS="$LDFLAGS -L${ac_cv_mysqlpp_lib}" - ;; - esac - CPPFLAGS="$CPPFLAGS -I${ac_cv_mysqlpp_inc}" - LIBS="-lmysqlpp $LIBS" - AC_LANG_PUSH([C++]) - AC_MSG_CHECKING([that we can build MySQL++ programs]) - AC_LINK_IFELSE( - [AC_LANG_PROGRAM( - [#include ], - [mysqlpp::Connection c(false)] - )], - [AC_MSG_RESULT([yes])], - [AC_MSG_RESULT([no]) - AC_MSG_ERROR([Cannot build MySQL++ programs])] - ) - AC_LANG_POP([C++]) -]) dnl End MYSQLPP_DEVEL diff --git a/m4/mysql_loc.m4 b/m4/mysql_loc.m4 deleted file mode 100644 index ae994e7..0000000 --- a/m4/mysql_loc.m4 +++ /dev/null @@ -1,137 +0,0 @@ -dnl @synopsis MYSQL_C_API_LOCATION -dnl -dnl This macro tries to find MySQL C API header and library locations. -dnl -dnl We define the following configure script flags: -dnl -dnl --with-mysql: Give prefix for both library and headers, and try -dnl to guess subdirectory names for each by tacking common -dnl suffixes on like /lib and /include. -dnl --with-mysql-lib: Same as --with-mysql, but for library only. -dnl --with-mysql-include: Same as --with-mysql, but for headers only. -dnl -dnl @version 1.4, 2009/05/28 -dnl @author Warren Young -AC_DEFUN([MYSQL_C_API_LOCATION], -[ - # - # Set up configure script macros - # - AC_ARG_WITH(mysql, - [ --with-mysql= root directory path of MySQL installation], - [MYSQL_lib_check="$with_mysql/lib/mysql $with_mysql/lib" - MYSQL_inc_check="$with_mysql/include $with_mysql/include/mysql"], - [MYSQL_lib_check="/usr/lib64 /usr/lib /usr/lib64/mysql /usr/lib/mysql /usr/local/lib64 /usr/local/lib /usr/local/lib/mysql /usr/local/mysql/lib /usr/local/mysql/lib/mysql /usr/mysql/lib/mysql /opt/mysql/lib /opt/mysql/lib/mysql /sw/lib /sw/lib/mysql /usr/lib/x86_64-linux-gnu" - MYSQL_inc_check="/usr/include/mysql /usr/local/include/mysql /usr/local/mysql/include /usr/local/mysql/include/mysql /usr/mysql/include/mysql /opt/mysql/include/mysql /sw/include/mysql"]) - AC_ARG_WITH(mysql-lib, - [ --with-mysql-lib= directory path of MySQL library installation], - [MYSQL_lib_check="$with_mysql_lib $with_mysql_lib/lib64 $with_mysql_lib/lib $with_mysql_lib/lib64/mysql $with_mysql_lib/lib/mysql"]) - AC_ARG_WITH(mysql-include, - [ --with-mysql-include= directory path of MySQL header installation], - [MYSQL_inc_check="$with_mysql_include $with_mysql_include/include $with_mysql_include/include/mysql"]) - - # - # Decide which C API library to use, based on thread support - # - if test "x$acx_pthread_ok" = xyes - then - MYSQL_C_LIB_NAME=mysqlclient_r - else - MYSQL_C_LIB_NAME=mysqlclient - fi - - # - # Look for MySQL C API library - # - AC_MSG_CHECKING([for MySQL library directory]) - MYSQL_C_LIB_DIR= - for m in $MYSQL_lib_check - do - if test -d "$m" && \ - (test -f "$m/lib$MYSQL_C_LIB_NAME.so" || \ - test -f "$m/lib$MYSQL_C_LIB_NAME.a") - then - MYSQL_C_LIB_DIR=$m - break - fi - done - - if test -z "$MYSQL_C_LIB_DIR" - then - AC_MSG_ERROR([Didn't find $MYSQL_C_LIB_NAME library in '$MYSQL_lib_check']) - fi - - case "$MYSQL_C_LIB_DIR" in - /* ) ;; - * ) AC_MSG_ERROR([The MySQL library directory ($MYSQL_C_LIB_DIR) must be an absolute path.]) ;; - esac - - AC_MSG_RESULT([$MYSQL_C_LIB_DIR]) - - case "$MYSQL_C_LIB_DIR" in - /usr/lib) - MYSQL_C_LIB_DIR= - ;; - *) - LDFLAGS="$LDFLAGS -L${MYSQL_C_LIB_DIR}" - ;; - esac - - - # - # Look for MySQL C API headers - # - AC_MSG_CHECKING([for MySQL include directory]) - MYSQL_C_INC_DIR= - for m in $MYSQL_inc_check - do - if test -d "$m" && test -f "$m/mysql.h" - then - MYSQL_C_INC_DIR=$m - break - fi - done - - if test -z "$MYSQL_C_INC_DIR" - then - AC_MSG_ERROR([Didn't find the MySQL include dir in '$MYSQL_inc_check']) - fi - - case "$MYSQL_C_INC_DIR" in - /* ) ;; - * ) AC_MSG_ERROR([The MySQL include directory ($MYSQL_C_INC_DIR) must be an absolute path.]) ;; - esac - - AC_MSG_RESULT([$MYSQL_C_INC_DIR]) - - CPPFLAGS="$CPPFLAGS -I${MYSQL_C_INC_DIR}" - - AC_MSG_CHECKING([if we can link to MySQL C API library directly]) - save_LIBS=$LIBS - LIBS="$LIBS -l$MYSQL_C_LIB_NAME $MYSQLPP_EXTRA_LIBS" - AC_TRY_LINK( - [ #include ], - [ mysql_store_result(0); ], - AC_MSG_RESULT([yes]), - [ AC_MSG_RESULT([no]) - LIBS="$save_LIBS" - AC_CHECK_HEADERS(zlib.h, AC_CHECK_LIB(z, gzread, [], - [ AC_MSG_ERROR([zlib not found]) ])) - AC_MSG_CHECKING([whether adding -lz will let MySQL C API link succeed]) - MYSQLPP_EXTRA_LIBS="$MYSQLPP_EXTRA_LIBS -lz" - LIBS="$save_LIBS -l$MYSQL_C_LIB_NAME $MYSQLPP_EXTRA_LIBS" - AC_TRY_LINK( - [ #include ], - [ mysql_store_result(0); ], - AC_MSG_RESULT([yes]), - [ AC_MSG_RESULT([no]) - AC_MSG_ERROR([Unable to link to MySQL client library!]) - ] - ) - ]) - LIBS=$save_LIBS - - AC_SUBST(MYSQL_C_INC_DIR) - AC_SUBST(MYSQL_C_LIB_DIR) - AC_SUBST(MYSQL_C_LIB_NAME) -]) dnl MYSQL_C_API_LOCATION diff --git a/m4/tcmalloc.m4 b/m4/tcmalloc.m4 deleted file mode 100644 index 73d4b4c..0000000 --- a/m4/tcmalloc.m4 +++ /dev/null @@ -1,11 +0,0 @@ -AC_DEFUN([TCMALLOC], - [AC_ARG_WITH( - [tcmalloc], - [AS_HELP_STRING([--with-tcmalloc], [use tcmalloc if it's available [default=yes]])], - [], - [with_tcmalloc=yes]) - - AS_IF([test "x$with_tcmalloc" != "xno"], - [AC_CHECK_LIB([tcmalloc], [tc_free])] - )] -) diff --git a/missing b/missing deleted file mode 100755 index f62bbae..0000000 --- a/missing +++ /dev/null @@ -1,215 +0,0 @@ -#! /bin/sh -# Common wrapper for a few potentially missing GNU programs. - -scriptversion=2013-10-28.13; # UTC - -# Copyright (C) 1996-2014 Free Software Foundation, Inc. -# Originally written by Fran,cois Pinard , 1996. - -# This program is free software; you can redistribute it and/or modify -# it under the terms of the GNU General Public License as published by -# the Free Software Foundation; either version 2, or (at your option) -# any later version. - -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. - -# You should have received a copy of the GNU General Public License -# along with this program. If not, see . - -# As a special exception to the GNU General Public License, if you -# distribute this file as part of a program that contains a -# configuration script generated by Autoconf, you may include it under -# the same distribution terms that you use for the rest of that program. - -if test $# -eq 0; then - echo 1>&2 "Try '$0 --help' for more information" - exit 1 -fi - -case $1 in - - --is-lightweight) - # Used by our autoconf macros to check whether the available missing - # script is modern enough. - exit 0 - ;; - - --run) - # Back-compat with the calling convention used by older automake. - shift - ;; - - -h|--h|--he|--hel|--help) - echo "\ -$0 [OPTION]... PROGRAM [ARGUMENT]... - -Run 'PROGRAM [ARGUMENT]...', returning a proper advice when this fails due -to PROGRAM being missing or too old. - -Options: - -h, --help display this help and exit - -v, --version output version information and exit - -Supported PROGRAM values: - aclocal autoconf autoheader autom4te automake makeinfo - bison yacc flex lex help2man - -Version suffixes to PROGRAM as well as the prefixes 'gnu-', 'gnu', and -'g' are ignored when checking the name. - -Send bug reports to ." - exit $? - ;; - - -v|--v|--ve|--ver|--vers|--versi|--versio|--version) - echo "missing $scriptversion (GNU Automake)" - exit $? - ;; - - -*) - echo 1>&2 "$0: unknown '$1' option" - echo 1>&2 "Try '$0 --help' for more information" - exit 1 - ;; - -esac - -# Run the given program, remember its exit status. -"$@"; st=$? - -# If it succeeded, we are done. -test $st -eq 0 && exit 0 - -# Also exit now if we it failed (or wasn't found), and '--version' was -# passed; such an option is passed most likely to detect whether the -# program is present and works. -case $2 in --version|--help) exit $st;; esac - -# Exit code 63 means version mismatch. This often happens when the user -# tries to use an ancient version of a tool on a file that requires a -# minimum version. -if test $st -eq 63; then - msg="probably too old" -elif test $st -eq 127; then - # Program was missing. - msg="missing on your system" -else - # Program was found and executed, but failed. Give up. - exit $st -fi - -perl_URL=http://www.perl.org/ -flex_URL=http://flex.sourceforge.net/ -gnu_software_URL=http://www.gnu.org/software - -program_details () -{ - case $1 in - aclocal|automake) - echo "The '$1' program is part of the GNU Automake package:" - echo "<$gnu_software_URL/automake>" - echo "It also requires GNU Autoconf, GNU m4 and Perl in order to run:" - echo "<$gnu_software_URL/autoconf>" - echo "<$gnu_software_URL/m4/>" - echo "<$perl_URL>" - ;; - autoconf|autom4te|autoheader) - echo "The '$1' program is part of the GNU Autoconf package:" - echo "<$gnu_software_URL/autoconf/>" - echo "It also requires GNU m4 and Perl in order to run:" - echo "<$gnu_software_URL/m4/>" - echo "<$perl_URL>" - ;; - esac -} - -give_advice () -{ - # Normalize program name to check for. - normalized_program=`echo "$1" | sed ' - s/^gnu-//; t - s/^gnu//; t - s/^g//; t'` - - printf '%s\n' "'$1' is $msg." - - configure_deps="'configure.ac' or m4 files included by 'configure.ac'" - case $normalized_program in - autoconf*) - echo "You should only need it if you modified 'configure.ac'," - echo "or m4 files included by it." - program_details 'autoconf' - ;; - autoheader*) - echo "You should only need it if you modified 'acconfig.h' or" - echo "$configure_deps." - program_details 'autoheader' - ;; - automake*) - echo "You should only need it if you modified 'Makefile.am' or" - echo "$configure_deps." - program_details 'automake' - ;; - aclocal*) - echo "You should only need it if you modified 'acinclude.m4' or" - echo "$configure_deps." - program_details 'aclocal' - ;; - autom4te*) - echo "You might have modified some maintainer files that require" - echo "the 'autom4te' program to be rebuilt." - program_details 'autom4te' - ;; - bison*|yacc*) - echo "You should only need it if you modified a '.y' file." - echo "You may want to install the GNU Bison package:" - echo "<$gnu_software_URL/bison/>" - ;; - lex*|flex*) - echo "You should only need it if you modified a '.l' file." - echo "You may want to install the Fast Lexical Analyzer package:" - echo "<$flex_URL>" - ;; - help2man*) - echo "You should only need it if you modified a dependency" \ - "of a man page." - echo "You may want to install the GNU Help2man package:" - echo "<$gnu_software_URL/help2man/>" - ;; - makeinfo*) - echo "You should only need it if you modified a '.texi' file, or" - echo "any other file indirectly affecting the aspect of the manual." - echo "You might want to install the Texinfo package:" - echo "<$gnu_software_URL/texinfo/>" - echo "The spurious makeinfo call might also be the consequence of" - echo "using a buggy 'make' (AIX, DU, IRIX), in which case you might" - echo "want to install GNU make:" - echo "<$gnu_software_URL/make/>" - ;; - *) - echo "You might have modified some files without having the proper" - echo "tools for further handling them. Check the 'README' file, it" - echo "often tells you about the needed prerequisites for installing" - echo "this package. You may also peek at any GNU archive site, in" - echo "case some other package contains this missing '$1' program." - ;; - esac -} - -give_advice "$1" | sed -e '1s/^/WARNING: /' \ - -e '2,$s/^/ /' >&2 - -# Propagate the correct exit status (expected to be 127 for a program -# not found, 63 for a program that failed due to version mismatch). -exit $st - -# Local variables: -# eval: (add-hook 'write-file-hooks 'time-stamp) -# time-stamp-start: "scriptversion=" -# time-stamp-format: "%:y-%02m-%02d.%02H" -# time-stamp-time-zone: "UTC" -# time-stamp-end: "; # UTC" -# End: diff --git a/src/events.h b/src/events.h index f2e8286..1c87cd0 100644 --- a/src/events.h +++ b/src/events.h @@ -2,6 +2,10 @@ #undef EV_ERROR #endif +#ifndef MSG_NOSIGNAL +#define MSG_NOSIGNAL 0x2000 /* don't raise SIGPIPE */ +#endif + #include #include #include diff --git a/src/ocelot.cpp b/src/ocelot.cpp index 3206e32..a43c378 100644 --- a/src/ocelot.cpp +++ b/src/ocelot.cpp @@ -4,9 +4,9 @@ #include #include #include -#include "spdlog/spdlog.h" -#include "spdlog/sinks/daily_file_sink.h" -#include "spdlog/sinks/stdout_sinks.h" +#include +#include +#include #include "ocelot.h" #include "config.h" #include "db.h" diff --git a/src/response.h b/src/response.h index 6f4d6f2..ca555d5 100644 --- a/src/response.h +++ b/src/response.h @@ -1,5 +1,5 @@ #ifndef RESPONSE_H -#define REPSONSE_H +#define RESPONSE_H #include #include "ocelot.h" diff --git a/test/README.md b/test/README.md deleted file mode 100644 index 76c5dc1..0000000 --- a/test/README.md +++ /dev/null @@ -1,3 +0,0 @@ -Testing Ocelot -============== -